SenseGlove Nova Manuale utente
SenseGlove Nova
Getting Started Guide
2
EU – Declaration of Conformity
SenseGlove declares that the SenseGlove Nova
complies with the essential requirements and other
relevant provisions of Directive 2014/30/EU. A copy of
the Declaration of conformity is available on request.
SenseGlove B.V.
Molengraaffsingel 12,
2629JD Delft, the Netherlands
3
Contents 3
What’s in the box? 4
Glossary 6
Bluetooth pairing 8
Charging 10
Wearing the Nova 11
Installing the Nova 13
Mounting trackers & controllers 14
Softglove care 16
Your first project 17
General Safety Prescriptions 19
Contact us 21
Specifications 21
Warranty 21
Disposal 21
Contents
4
Below you find all items included in the SenseGlove
Nova kit. With the use of these items a proper
functioning of the Nova is guaranteed. If spare parts
are needed please contact us.
1 Nova left
2 Nova right
3 Softglove left
4 Softglove right
5 Tracker mount left
6 Tracker mount right
7 Accessory section
What’s in the box?
5
The following items can be found in the accessory
slot of the packaging.
1 Charging cables (USB A - micro USB)
2 Dual USB charger
3 Screwdriver
4 Screwdriver tips
5 Bolts for trackermounts
6
Glossary
Below are some common terminologies used for
describing the specific parts of the Nova within this
guide.
1 Thimble
2 Cable guide
3 Finger tab
4 Power button
5 Charging port
6 Hub
7 LED indicator
8 Force feedback cable
9 Softglove
10 Palm strap
7
8
Bluetooth pairing
Make sure the device is turned on by briefly
pressing the power button until the LED light turns
on.
Windows 10:
Go to Settings > Devices > Bluetooth & other devices
> Add Bluetooth or other device > Bluetooth. Select
NOVA-XXXX (where XXXX is an uniquely generated
ID for your Nova) in the list of nearby devices. The L
or R at the end indicates whether the glove is left or
right -handed
After selecting NOVA-XXXX a pop-up window will
appear, asking whether you want to pair the device.
Press “connect”. Your device is now paired and
trusted.
PICO NEO 2:
Go to Settings > Bluetooth. Select NOVA-XXXX
(where XXXX is an uniquely generated ID for your
nova) from the list of “other devices” and click on
“Pair Device”. It should now appear on top of the list
under “paired devices”.
9
Oculus Quest 2:
Go to Settings > Experimental Features > Bluetooth
Pairing > Pair. Click on “Pair New Device”. Select
NOVA-XXXX (where XXXX is an unique ID for your
nova) in the list of nearby devices. A pop-up will
appear. Select “Confirm” to complete the pairing
process.
General:
If you aren’t seeing a device called NOVA-XXXX
appear in your list of devices, it is either already
paired or turned off. You only have to perform this
pairing process once. When using the Nova again,
your PC or headset and the Nova will remain
paired, even if the devices are rebooted.
10
Charging
For first use, it is recommended to charge your
Nova fully. Make sure to use the included micro-
USB cable to charge your device. Plug the USB
cable into the included charger and then plug the
charger into a power outlet. It is possible to charge
the Nova with the USB port of your computer. This
will however charge slower than with the included
charger.
Indice
Altri manuali SenseGlove Robotica
