SentrySafe Master Lock Fire-Safe FPW082FS Manuale utente

Fire-Safe®Owner’s Manual

Instructions

Anleitung

Instructies

Instrucciones

Istruzioni

Instruções

:Sentrysafe.com

:Masterlock.eu

Οδηγίες

Instruksjoner

Instruktioner

Ohjeet

Instruktioner

Instrukcja obsługi

Utasítások

Instrucțiuni

Pokyny

Инструкция

Talimatlar

説明書

التعليمات

明

Instruksi

지침

คำ�แนะนำ�

Hướng dẫn

WARNING

Gun warning

This product is not intended for the secure storage of all materials. Items such as ﬁrearms, other

weapons, combustible materials, or medication should NOT be stored in this unit.

NOTICE

Do NOT store delicate items directly in your safe.

SentrySafe / Master Lock products which offer ﬁre protection have a proprietary insulation that has

a high moisture content. In addition, the SentrySafe / Master Lock advanced safes close airtight to

offer water resistance, which may also cause moisture to accumulate inside your safe. The desiccant

packet

included in your safe during shipment should be left in your safe. DO NOT DISCARD IT. It is

intended to help absorb moisture which may accumulate inside your safe. Please open your unit

once every two weeks to avoid moisture accumulation.

If you choose to store delicate items such as jewelry with working parts, watches, stamps, or

photos in your safe, we recommend putting them in an air-tight container, prior to placing them in

the safe for storage.

NOTE: SentrySafe / Master Lock Lock will not be responsible for any damage or loss of items

placed in the unit due to moisture.

Do NOT store pearls in this safe.

In the event of a ﬁre, potential damage to delicate pearls occurs at temperatures much lower than

the 350°F (176°C) interior performance measure which the UL classiﬁcation performance standard

indicated guarantees. Therefore, DO NOT store pearls in your SentrySafe / Master Lock product.

Do NOT store magnetic media or photo negatives.

This product is not intended to protect magnetic media or photo negatives.

Your safe is only part of your total security protection.

SentrySafe / Master Lock recommends that you store your safe in closets, ofﬁces, basements,

bedrooms and any other locations that are convenient for you but out of direct line of sight from

prying eyes. The location of the safe does not affect the safe’s ability to protect your valuables

inside.

English

Table of Contents

Registration:

www.registermysafe.com

Reasons to register

By registering your SentrySafe / Master Lock product you can easily retrieve forgotten codes and

combinations.

By registering your SentrySafe / Master Lock product you can be sure that in the unfortunate

circumstance of a ﬁre you will be guaranteed your replacement safe (provided ofﬁcial paperwork).

English

Warnings ..............................................................................................................2

Registration ..........................................................................................................3

Mechanical Combination Lock...............................................................................4-5

Programmable Electronic Lock...............................................................................6-9

Operating the Light ...............................................................................................10

Operating Sound Features .....................................................................................10

Bolting Down Your Safe.........................................................................................11-12

Troubleshooting ....................................................................................................13

Replacement & Warranty .......................................................................................14

Fire/Water Speciﬁcations .......................................................................................15

Customer Service...................................................................................................16

Français ..................................................................................................... 17

Español...................................................................................................... 33

IMPORTANT

If you experience any problems or challenges with your safe, please contact us.

Many issues can be resolved quickly without the product being returned.

Our customer care team is available at 1-800-828-1438 to answer your questions.

NOTE: • Store combination (and keys if equipped) in a secure

location (other than in the safe).

• Combination can not be changed.

• DO NOT RETURN! Questions or concerns, call us at

1-800-828-1438.

Find your combination on the back of this owner’s manual.

FOR SAFES WITH OVERRIDE KEY ONLY

Keys are shipped outside of the safe. Be sure to locate them before

locking your safe.

WARNING

Test your combination several times before putting valuables inside.

1Insert key into the cylinder, turn to the ‘unlocked’ position.

2Pull handle outward to open the door.

Rotate dial to ‘0’, then rotate right (clockwise) passing ‘0’ three

times, continue rotating until you reach the ﬁrst number in your

combination.

Mechanical Combination Lock

FPW082TEST

SN100TEST01*

10-22-33 RLR

2075

Preparing your safe for ﬁrst time use

Unlocking your safe using the override key only (for select models)

Unlocking your safe using the combination dial

English

Rotate dial to the left (counterclockwise). Go PAST the second

number of your combination ONCE and stop the SECOND time

the dial reaches the number.

Rotate the dial to the right (clockwise), stop when you reach

the third number in your combination.

4Pull handle outward to open the door.

1Close the door to re-engage locking bolts.

2Turn key to the ‘locked’ position.

1Close the door to re-engage locking bolts.

Spin the dial at least 2x to the right (clockwise)

to scramble the lock.

NOTE: • Safe will not lock until the combination dial is scrambled.

• Safe will not lock unless key cylinder is turned to the locked position.

Locking your safe using the override key (for select models)

Locking your safe using the combination dial

NOTE: • Store code (and keys if equipped) in a secure location

(other than in the safe).

• DO NOT RETURN! Questions or concerns, call us at

1-800-828-1438.

Find your code on the back of this owner’s manual.

FOR SAFES WITH OVERRIDE KEY ONLY

Keys are shipped outside of the safe. Be sure to locate them before

locking your safe.

WARNING

Test your code several times before putting valuables inside.

1Insert key into the cylinder, turn to the ‘unlocked’ position.

2Pull handle outward to open the door.

Programmable Electronic Lock

Preparing your safe for ﬁrst time use

Unlocking your safe using the override key only (for select models)

FPW082TEST

SN100TEST01*

12345

English

Enter the 5 digit factory code found on the back of the

owner’s manual.

2The green light will stay illuminated to indicate the code is

correct. You will have 5 seconds to open your safe.

Pull handle outward to open the door.

NOTE: • Factory installed batteries included.

• Delay mode will occur if three consecutive invalid entries have been tried. Red LED will

blink on and off to let you know the safe is in delay mode. This will cause the system to

shutdown for two minutes. DO NOT remove the batteries to restart the system it will only

increase the length of time for the system shutdown.

Close the door to re-engage locking bolts.

Turn key to the ‘locked’ position.

Close the door to re-engage locking bolts.

Wait 5 seconds and try to open your safe without entering any

code or using the override key to ensure safe is locked.

NOTE: • If your safe does not appear to be working properly, please check to make sure you are

using NEW CR123 lithium batteries before contacting customer Service.

Locking your safe using the override key only (for select models)

Unlocking your safe using the electronic keypad

Locking your safe using the electronic keypad

Three code options:

Factory code:

The safe will ALWAYS unlock using this 5 digit code (found on the

back of the owner’s manual). This code cannot be deleted.

User code:

A 5 digit programmable code of your choosing that can be changed

or deleted.

Secondary code:

Up to 3 secondary 5 digit programmable codes can be changed or

deleted. A secondary can only be programmed after a user code

has been activated.

NOTE: • The “C” key is a clear key.This can be used at anytime to clear the system and return to

standby mode – unless you are in delay mode (3 consecutive invalid entries).

• The 5 digit factory code cannot be deleted. However, you may add and delete

additional codes.

This safe can store up to ﬁve codes at one time. One factory code and 4 additional

programmable codes.

Programmable Electronic Lock

Programming information

Programming the user code

Programming the secondary code

To ADD a user code:

1Press “P” on the keypad.

2Enter the 5 digit factory code found on the back of your owner’s manual.

3The light will ﬂash green and then you will have ﬁve seconds to enter your own

personal 5 digit user code.

To DELETE a user code:

1Press “P” on the keypad.

2Enter the 5 digit factory code.

3Enter 0,0,0,0,0.

NOTE: • The electronic lock will NOT indicate that it has deleted the user code – please test the

code to make sure it has been deleted.

To ADD a secondary code:

1Press “P” on the keypad two time.

2Enter the 5 digit user code previously programmed.

English

3The light will ﬂash green and then you will have ﬁve seconds to enter your own

personal 5 digit secondary code.

4Repeat steps 1-3 in order to add an additional secondary code.

To DELETE a secondary code:

1Press “P” on the keypad two time.

2Enter the 5 digit user code.

3Enter 0,0,0,0,0.

4Repeat steps 1-3 in order to delete an additional secondary code.

NOTE: • The electronic lock will NOT indicate that it has deleted the secondary code – please

test the code to make sure it has been deleted.

• Secondary codes will be deleted in the order they were programmed.

1Locate the battery pack compartment on the inside of the door

and remove the cover.

2Insert two CR123 lithium batteries.

3Replace battery pack cover.

NOTE: • Do not use rechargeable batteries or any other type

of non- CR123 lithium battery. Do not mix old and

new batteries.

If battery power in the safe is running low and cannot operate the safe, you will need to use the

battery auxiliary override feature to open the safe.

IMPORTANT: This should not be used as a primary means to gain entry into the safe.

1Open the silicone cap found on the side of the lock.

2Pull out the wire inside the lock and attach a 9 volt battery.

3Enter your ﬁve digit code.

4Pull handle outward to open the door.

Battery auxiliary override

Changing your batteries

The safe you have purchased may include a long-last LED interior

light. Not all safes include a light.

The batteries that operate the keypad are the same batteries that

operate the light. If the light in your unit does not turn on, please

change your batteries. Refer to page 9 to change the batteries.

The light will turn on every time you enter your code and will remain

on for 30 seconds. The light duration has three options – off, 30

seconds, and 60 seconds.

To turn the light off:

1Press “0” on the keypad.

2Press “P” on the keypad.

3Press “3” on the keypad.

To turn the light on for 30 seconds:

1Press “0” on the keypad.

2Press “P” on the keypad.

3Press “4” on the keypad.

To turn the light on for 60 seconds:

1Press “0” on the keypad.

2Press “P” on the keypad.

3Press “5” on the keypad.

NOTE: • If the light duration is 60 seconds, the battery life will be reduced at a

faster rate.

For Programmable Electronic Lock Only

The tones of the keypad may be turned on and off depending on user preference.

Turn sound off:

1Press “O”on the keypad.

2Press “P” on the keypad.

3Press “1”on the keypad.

Turn sound on:

1Press “O”on the keypad.

2Press “P” on the keypad.

3Press “2”on the keypad.

Operating Light/Sound Features

Operating sound features

How to operate the light

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali SentrySafe Sicuro

SentrySafe

SentrySafe SFW123BTC Manuale utente

SentrySafe

SentrySafe 2B2100 Manuale utente

SentrySafe

SentrySafe Fire-Safe Manuale utente

SentrySafe

SentrySafe Fire-Safe SFW205GQC Manuale utente

SentrySafe

SentrySafe CHW30300 Manuale utente

SentrySafe

SentrySafe PL048E Manuale utente

SentrySafe

SentrySafe SFW123GTF Manuale utente

SentrySafe

SentrySafe P005K Manuale utente

SentrySafe

SentrySafe P008E Manuale utente

SentrySafe

SentrySafe X055 Manuale utente

SentrySafe

SentrySafe Security Safe Series Manuale utente

SentrySafe

SentrySafe QAP1E Manuale utente

SentrySafe

SentrySafe P44721 Manuale utente

SentrySafe

SentrySafe Fire-Safe Manuale utente

SentrySafe

SentrySafe Fire-Safe Manuale utente

SentrySafe

SentrySafe P005K Manuale utente

SentrySafe

SentrySafe P008E Manuale utente

SentrySafe

SentrySafe F2300 Manuale utente

SentrySafe

SentrySafe Fire-Safe Manuale utente

SentrySafe

SentrySafe Quick Access Pistol Manuale utente

SentrySafe

SentrySafe X055 Manuale utente

SentrySafe

SentrySafe Home Defense Center Manuale utente

SentrySafe

SentrySafe DH-109E Manuale utente

SentrySafe

SentrySafe EF3428E Manuale utente

Manuali Sicuro popolari di altre marche

Squire

Squire Stronghold Keysafe Manuale utente

Phoenix

Phoenix FS0352C Scheda informativa del prodotto

Phoenix

Phoenix KS0030E Series Manuale utente

Vaultek

Vaultek 10 Series Scheda tecnica

Arregui

Arregui CLASS Manuale utente

Beaumont

Beaumont SMART KEYBOX Manuale utente

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuale utente

Hornady

Hornady SnapSafe Trunk Safe II Manuale utente

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuale utente

Honeywell

Honeywell 5912 Manuale utente

Phoenix

Phoenix FS1280F Manuale utente

Phoenix

Phoenix SS0992K Scheda informativa del prodotto

Technomax

Technomax Trony Series Manuale

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuale utente

RICHTER CZECH

RICHTER CZECH LA Manuale operativo

Olymp

Olymp GOsafe 110 Manuale utente

Phoenix

Phoenix SS0100E Scheda informativa del prodotto

Clarke

Clarke Strong-Arm CS1000K Manuale di istruzioni