SentrySafe EF4738E Manuale utente

Executive Safes

Owner’s Manual

EF3428E

EF4738E

Warnings

WARNING

SentrySafe recommends that you do not store loaded guns in this unit.

This is a California-approved ﬁrearm safety device that meets the requirements of Penal Code

section 23655 and the regulations issued thereunder.

WARNING

DO NOT store delicate items directly in your safe.

SentrySafe products which offer ﬁre protection have a proprietary insulation that has a high

moisture content. In addition, the SentrySafe advanced safes close airtight to offer water resistance,

which may also cause moisture to accumulate inside your safe. The desiccant packet included in

your safe during shipment should be left in your safe. DO NOT DISCARD IT. It is intended to help

absorb moisture which may accumulate inside your safe. Please open your unit once every two

weeks to avoid moisture accumulation.

If you choose to store delicate items such as jewelry with working parts, watches, stamps, or

photos in your safe, we recommend putting them in an air-tight container, prior to placing them in

the safe for storage.

NOTE: SentrySafe will not be responsible for any damage or loss of items placed in the unit due

to moisture.

WARNING

DO NOT store pearls in this safe.

In the event of a ﬁre, potential damage to delicate pearls occurs at temperatures much lower

than the 350°F interior performance measure which the UL classiﬁcation performance standard

indicated guarantees. Therefore, DO NOT store pearls in your SentrySafe product.

WARNING

No computer disks, audio-visual cassettes or photo negatives.

This product is not intended to protect computer ﬂoppy or diskettes, cartridges and tapes, audio or

video cassettes or photo negatives.

WARNING

Your safe is only part of your total security protection.

SentrySafe recommends that you store your safe in closets, ofﬁces, basements, bedrooms and any

other locations that are convenient for you but out of direct line of sight from prying eyes. The

location of the safe does not affect the safe’s ability to protect your valuables inside.

WARNING

If children live of visit your home, do not leave your Executive safe open and unattended. Children

at play could accidently be locked inside the safe. Keep your safe closed and locked at all times.

English

Table Of Contents

REGISTRATION

www.sentrysafe.com/customercare/register_your_product

Reasons to register: By registering your SentrySafe Product you can easily retrieve forgotten

codes and combinations, which would otherwise require a notary letter and payment.

Thank you for your purchase of a SentrySafe Product. SentrySafe is committed to securing,

organizing and protecting your most important documents, valuables and keepsakes.

Français ........................................................................................................................11

Español.........................................................................................................................21

English

Warnings ......................................................................................................................2

Registration ..................................................................................................................3

Bolt-down instructions .................................................................................................4

Lock instructions ...........................................................................................................5

Troubleshooting ............................................................................................................7

SentrySafe Customer Care .............................................................................................8

If you experience any problems or challenges with your safe, please contact us.

Many issues can be resolved quickly without the product being returned.

•••IMPORTANT•••

DO NOT RETURN SAFE TO THE STORE!

To provide water-resistance this safe must be bolted down. (hardware supplied)

Bolt down kit contents:

2 Lag screws

2 Washers

Tools needed to bolt safe to a surface:

Drill

Wrench

9/32" (7.2 mm) drill bit – for drilling into wood

3/8" (9.5 mm) drill bit – for drilling into masonry

Select a suitable and convenient location for your safe. Set the

safe in place and use the holes provided in the bottom or back

of the safe to mark the location of the holes to be drilled in the

ﬂoor.

Move the safe away and drill holes of the appropriate diameter

and depth for the type of hardware and the mounting surface

being used (2 each – bolts, washers and masonry anchors).

Place the safe back over the holes and install the fasteners as

required. If a water resistant unit was purchased, rubberized

washers are provided.Assure that the area around the safe

hole opening is clean using a damp cloth. Place the rubber side

of the washer facing down against the safe ﬂoor and install

the fastener.

NOTE: SentrySafe is not responsible for any costs incurred if unit is to be replaced.

Bolt-down instructions

English

To activate lock:

Four alkaline AA batteries, Voltage: 6Vdc, (not included) are required to activate the keypad.

NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery. Do not mix

old and new batteries. Do not mix alkaline and standard batteries.

Using two hands, hold the keypad, thumbs down, on its left and

right sides. Push up the keypad with your thumbs, and disconnect

it from the safe by pulling it towards you.

Let the disengaged keypad hang by its wires. This will expose the

battery holder.

Install four alkaline AA batteries as illustrated on the back of the battery holder.

Reconnect the keypad by inserting the keypad’s four posts into the matching holes.

Push down to snap into place.

WARNING

Test first with door open!

(See back cover of this manual for your factory code.)

There are three possible ways to unlock and access the safe—by entering

its preset Factory Code, your own User Code or a User PIN (Personal

Identiﬁcation Number).

You can always open the safe by entering the 5-digit Factory Code. This

code cannot be deleted.

But if you prefer to use your own code, you can program the safe to open

to the 5-digit User Code of your choice. If you wish to give someone else

temporary access to the safe, you can program a User PIN that can later

be erased.

Standard Electronic Lock

To install batteries

Access codes

CONFIDENTIAL

Lock instructions

There are two ways to program a user code.

Press the Program button. (Prog).

Enter the Factory Code. The green LED remains ON while you

enter the 5-digit user code of your choice. After 5 digits are

entered the green LED turns OFF.

(To enter a new User Code, repeat these steps.)

–OR–

Press

the red button on inside of door (hinge side). The lock will

“beep” and the green LED will come on.

Enter a 5-digit user code.

(To enter a new User Code, repeat these steps.)

Keep your new user code secure

For your records, please copy it here:

Press the Program button

Press it a second time

Enter your 5-digit User Code. The green LED remains ON

Enter the 5-digit User PIN of your choice (any combination except 00000.) After 5 digits

are entered, the green LED turns OFF

(To enter a new User PIN, repeat these steps. To erase the User PIN, press Program twice,

enter your User Code and then enter 00000.)

If your electronic lock fails or you do not have any codes available, you may use the

override key that comes with the unit.

Using two hands, hold the keypad, thumbs down, on its left and

right sides. Push up the keypad with your thumbs, disconnect

and remove the battery holder.

Programming a user code

Programming a user PIN

Key override

English

Troubleshooting

Insert the skeleton key into the key hole inside the opening for

the battery.

Turn the key to the right.

Open the door.

Your electronic-lock safe communicates by means of several audio/visual signals.

The lock automatically enters a 2-minute Delay mode after an invalid code has been entered three

consecutive times. In this mode, the lock cannot be activated and any key entry will generate an

ERROR signal.

Signals

Delay mode

The Problem: Why It Is Happening: The Solution:

Red (Error) LED + three

beeps indicates one of the

following

You have pressed Program

key out of sequence.

Verify the code and re-enter

or reprogram

You have entered an invalid

code or user pin.

Verify the code and re-enter

or reprogram

You have let 5 seconds or

more elapse between key

presses.

Lights after three consecutive

invalid codes are input

(2-minute delay mode).

Green LED only Comes ON after you enter

a valid code and remains lit

during the 4-second period

in which the safe can be

opened.

Comes ON in the

Programming mode and

remains lit until you have

ﬁnished entering a 5-digit

code.

Yellow LED only Yellow light comes ON Batteries need to be

replaced.

SentrySafe Customer Care

Using the keypad on electronic safes

Peril Protection

Customer Service

www.sentrysafe.com

Phone Number: 1-800-828-1438

Fax: 1-585-381-2940

882 Linden Avenue / Dept. 200 / Rochester, New York / 14625-2784 USA

Caution

Liquids can damage the keypad!

Caution

Pen points or other sharp objects can puncture the keypad membrane!

Fire Protection

Veriﬁed by ETL SEMKO to meet manufacturer’s speciﬁcation for ﬁre resistance

1400°F (760°C) for 30 minutes endurance.

WARNING

If children live or visit in your home, do not leave your SentrySafe Executive Safe open

and unattended. Children at play could accidentally be locked inside the safe.Keep your safe closed

and locked at all times.

English

How to obtain a replacement key

1Please go to our website www.sentrysafe.com to ﬁnd the necessary replacement form. If

you are unable to use a computer, then please call the number above or fax us for a copy of

the replacement form.

2Find your safe’s Serial Number and model number. The Serial Number and model number are

printed on the small label on the back of the safe by hinge and in the owner’s manual.

3Please ﬁll out the form in its entirety.

4Send the following to SentrySafe: check or money order and replacement form. For current

pricing, please go to www.sentrysafe.com/customercare. If you are unable to use a

computer, then please call the number above or fax us.

5Mail to: SentrySafe, 882 Linden Avenue, Dept. 200, Rochester, NY 14625-2784, USA

-OR- fax statement (notary seal must be legible) to 1-585-381-2940.

Paying by credit card:

Payment may also be made using your credit card, by phone only.

Call 1-800-828-1438 to make a credit card payment. Do not fax credit card information.

NOTE: Prices subject to change without prior notiﬁcation.

NOTE: Key orders may be placed on a Saturday or Sunday. However, those orders will not be

processed until the following business day. Our Customer Service center is open Monday

through Friday, 8:00 a.m. until 6:00 p.m. E.S.T.

(Customer Service hours subject to change.)

Indice

Altri manuali SentrySafe Sicuro

SentrySafe

SentrySafe SFW123BTC Manuale utente

SentrySafe

SentrySafe Fire-Safe Manuale utente

SentrySafe

SentrySafe CHW30300 Manuale utente

SentrySafe

SentrySafe P005K Manuale utente

SentrySafe

SentrySafe Quick Access Pistol Manuale utente

SentrySafe

SentrySafe Fire-Safe Manuale utente

SentrySafe

SentrySafe Security Safe Series Manuale utente

SentrySafe

SentrySafe SFW123GTF Manuale utente

SentrySafe

SentrySafe P008E Manuale utente

SentrySafe

SentrySafe P44721 Manuale utente

SentrySafe

SentrySafe Fire-Safe Manuale utente

SentrySafe

SentrySafe Home Defense Center Manuale utente

SentrySafe

SentrySafe T8-331 Manuale utente

SentrySafe

SentrySafe EF3428E Manuale utente

SentrySafe

SentrySafe PL048E Manuale utente

SentrySafe

SentrySafe SentrySafe Manuale utente

SentrySafe

SentrySafe X055 Manuale utente

SentrySafe

SentrySafe TC8-331 Manuale utente

SentrySafe

SentrySafe Fire-Safe Manuale utente

SentrySafe

SentrySafe X055 Manuale utente

SentrySafe

SentrySafe SF123ES Manuale utente

SentrySafe

SentrySafe P008E Manuale utente

SentrySafe

SentrySafe F2300 Manuale utente

SentrySafe

SentrySafe FIRE SAFE Manuale utente

Manuali Sicuro popolari di altre marche

Squire

Squire Stronghold Keysafe Manuale utente

Phoenix

Phoenix FS0352C Scheda informativa del prodotto

Phoenix

Phoenix KS0030E Series Manuale utente

Vaultek

Vaultek 10 Series Scheda tecnica

Arregui

Arregui CLASS Manuale utente

Beaumont

Beaumont SMART KEYBOX Manuale utente

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuale utente

Hornady

Hornady SnapSafe Trunk Safe II Manuale utente

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuale utente

Honeywell

Honeywell 5912 Manuale utente

Phoenix

Phoenix FS1280F Manuale utente

Phoenix

Phoenix SS0992K Scheda informativa del prodotto

Technomax

Technomax Trony Series Manuale

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuale utente

RICHTER CZECH

RICHTER CZECH LA Manuale operativo

Olymp

Olymp GOsafe 110 Manuale utente

Phoenix

Phoenix SS0100E Scheda informativa del prodotto

Clarke

Clarke Strong-Arm CS1000K Manuale di istruzioni