SetOne TX-8300 Manuale utente

Seite 1

Preface

Dear Customer,

Thank you for purchasing a product from our company.

To get the most enjoyment from your viewing experience, our products constantly strict quality and

safety are subject to (GS).

With your choice of this product you have chosen for the new technologies of digital reception. These

new technologies offer a variety of features and possibilities.

Before starting to make themselves thoroughly familiar with your device. Please read this manual

carefully so that you can exhaust all the options offered on this receiver full.

This manual will help you intended, safe and benecial use of digital satellite receiver, hereinafter called

the receiver.

Keep this manual always close to the receiver. Enter the manual even further if you sell or pass on your

receiver.

We hope you enjoy your new receiver.

Your team SetOne

Seite 2

Design features

Various elements of the manual are provided with set design aspects. So you can easily distinguish

whether it is normal text,

• / ►Enumerations / action steps

Warnings

General Notes

Art-Nr.: 10-01-000-083

EAN: 4260141713122

Illustrations, subject to technical changes and corrections.

For printing errors, we assume no liability.

1st Edition. 1.0_DE version, as of 08/2010

Information

Seite 3

Contents

Preface 1

Design features 2

Information 2

Contents 3

General Introductions 6

INTRODUCTION 6

1. Safety Instructions 6

a) MAIN SUPPLY 6

b) OVERLOADING 6

c) LIQUIDS 6

d) CLEANING 6

e) VENTILATION 6

f) ATTACHMENTS 6

g) CONNECTION TO THE SATELLITE 7

h) CONNECTION TO THE TV 7

i) EARTHING 7

j) LOCATION 7

k) Battery handling 7

l) Protection classes 7

2. Product Overview 8

2.1 Front Panel 8

2.2 Rear Panel 9

2.3 Remote control 10

3. Connectivity 12

4. Installation 13

4.1 Connecting your Receiver 13

4.2 Preparing your Remote Control 13

4.3 TV Format Set-Up 13

4.4 Check Satellite Signal Reception 13

4.5 Fast Channel Set-Up Astra 2A/B/D/Eurobird 1 14

4.6 Chosen Satellite Scan 14

5. Menu System 15

5.1 Installation Menu 15

Seite 4

5.1.1 Selecting your Satellite 15

5.1.2 Selecting your SCAN Options 15

5.1.3 Scanning 15

6. Channel Manager Menu 16

6.1 Channel Edit 16

6.2 Delete Channel 16

6,3 Set Favourite 16

7. System Setting 17

7.1 AV Setting 17

7.2 Local Time Setting 17

7.3 Timer 18

7.4 System Information 18

8. System Setting 19

8.1 OSD Setting 19

8.2 Parental Control 19

8.3 Private Setting 20

8.4 Factory Default 20

9. USB 21

9.1 Multimedia 21

9.2 Software Upgrade 21

9.3 Database Backup 21

9.4 Database Update 22

9.5 PVR Partition Select 22

9.6 PVR Preview 22

10. Advanced Installation 23

10.1 Antenna Setting 23

10.2 Satellite List 24

10.3 Transponder List 24

10.4 Setup Motor(DiSEqC) 25

10.5 USALS (DiSEqC) Setup 25

11. Software Update 27

12. Dismantle and store 28

13. Receiver clean 28

Seite 5

14. Trouble Shooting 29

15. Discard Receiver 30

16. Technical data 31

17. Service 33

18. Guarantee 33

19. Declaration of Conformity 34

20. Sercive Hotline 34

Seite 6

General Introductions

INTRODUCTION

This manual will help you learn basic functions

such as installation, selecting channels and many

other functions of the STB. All functions can be

operated by the remote control. You can easily

install it by selecting ”Installation” function and

upgrade its software through communication

cable.

The remote control is designed for easy access

to all the functions at once and for comfortable

grab for your hand. It is programmed to control

all functions and to easily watch TV and Radio

programs via the STB.

WARNING!!!

Any problems can be caused by the use of

unofcial software. The use of software versions

other than dealers or distributors ofcial software

will void the manufacturer’s warranty. It is advised

that only the formal software released from

dealers or distributors should be used.

1. Safety Instructions

This STB has been manufactured to satisfy

the international safety standards. Please

read the following safety precautions carefully.

a) MAIN SUPPLY

AC 100/240V, 50/60Hz, 30W.

b) OVERLOADING

Do not overload a wall outlet, extension cord

or adapter as this may result in re or electric

shock.

Ensure that the power source (socket) is

easily accessible.

c) LIQUIDS

This STB shall not be exposed to dripping

or splashing and that no objects lled with

liquids, such as vases, shall be placed on the

STB.

d) CLEANING

Disconnect the STB from the main supply

before cleaning. Do not use any kind of

solvents to clean the STB, only use a soft-dry

cloth.

e) VENTILATION

The slots on top of the STB must be left

uncovered to allow proper airow to the unit.

Ensure a minimum distance of 5cm around

the apparatus for sufcient ventilation.

Ensure that the ventilation is not impeded by

covering the ventilation openings with items

such as newspapers, table-cloths, curtains,

etc.

Do not stand the STB on soft furnishings or

carpets.

Do not expose the STB to direct sunlight or do

not place it near a heater.

Do not stack electronic equipments on top of

the STB.

Do not place naked ame sources, such as

lighted candles on the apparatus.

f) ATTACHMENTS

Do not use any unrecommended attachments

as these may cause hazard or damage to the

STB.

g) CONNECTION TO THE SATELLITE

DISH LNB

Disconnect the STB from the main supply

before connecting or disconnecting the cable

from the satellite dish.

FAILURE TO DO SO CAN DAMAGE THE TV.

Seite 7

h) CONNECTION TO THE TV

Disconnect the STB from the main supply

before connecting or disconnecting the cable

from TV.

FAILURE TO DO SO CAN DAMAGE THE TV

i) EARTHING

The LNB cable MUST BE EARTHED to the

system earth for the satellite dish.

j) LOCATION

Place the STB indoor in order not to expose to

lightening , rain or Sunlight.

Use the apparatus only in moderate climates

(not in tropical climates).

k) Battery handling

Batteries may contain toxic agents that are

hazardous to the environment. Therefore,

dispose of the batteries immediately according

to the prevailing statutory regulations. Never

throw the batteries in normal household

waste.

l) Protection classes

This product with the protection

class II (Fig. icon). Apparatus

protected class II have

reinforced or double insulation

between the power circuit and

the output voltage or metal

casing and have no connection to the earth.

Seite 8

2. Product Overview

2.1 Front Panel

No. Symbol Function

1. I/O Switch to full off the receiver.

2. ▲/▼ Channel Select, marking in menus.

3. LED-DISPLAY 4-digit LED display (7 segment).

4. USB-Port Behind the ap is a USB Port For connecting external storage devices.

1 2 3 4

Seite 9

2.2 Rear Panel

No. Symbol Function

1. IF IN Use to connect an antenna.

2. IF OUT Use it when connecting to another STB.

3. S/PDiF SPDIF format sound by coaxial and optical output

4. HDMI Digitaler HDMI-Ausgang zum Anschluss Ihres digitalen HDTV-

Fernsehgerätes.

5. TV To connect the high denition media interface output to HDTV.

6. Power cord AC 100 – 250 V ~ 50 / 60Hz, Max.40W

1 2 3 4 5 6

Seite 10

2.3 Remote control

1. I/O: Switches between Operation and Standby modes.

2. SLEEP: To display the sleep timer

3. 0-9: Changes channels or selects the menu options.

4. EXIT: Press to exit the current menu.

5. VOL +/-: You can adjust the volume with this button.

6. ▲/▼: Changes channels or items from top to bottom on the menu.

7. ◄/►: Changes the page of channel list.

8. TV/Radio: You can switch between TV and Radio mode switch and / or opens a menu of

options within the menu.

9. ROT: It opens the options menu: Multifeed.

10. MENÜ: Moves to main menu during TV viewing.

11. SUB: Open the subtitle function in programs with an appropriate offer.

12. Format Format

13. TXT: Switch on the videotext.

14. MUTE: Turn off volume.

15. BACK: Back to last menu.

16. INFO: Displays the program information box on the screen.

17. CH +/-: Changes channels or items from top to bottom on the menu.

18. EPG: Electronic Program Guide button displays the TV/Radio program guide broadcasting by

Satellite TV provider.

19. OK: Displays the channel list and selects the item on the menu.

20. FAV: Open the Favorites list, or opens a menu of options within the menu.

21. BLAU: Opens the Timer list or open a menu of options within the menu.

22. AUDIO: Changes audio mode to left right and stereo.

24. PVR: Take you directly to the menu item „Media Management“.

25. << / >>: Speed up and back while USB Media playing.

26. PLAY: Starts playing a media le.

27. STOP: Stop playing.

28. PAUSE: Pauses a play or start the time shift.

29. REC: Start recording.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SetOne Ricevitore

SetOne

SetOne Easy One Manuale utente

SetOne

SetOne TX-1200 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente