SEWOO SLK-TL32X Series Manuale utente
All specifications are subject to change without notice
MODEL : SLK-TL32X Series
Receipt Printer User’s Manual
2
This device co mplies with part 15 of the FCC Rules.
Operation is subject to the following two conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
Vic Barczyk
19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA
NA_Sales@miniprinter.com
Victor Almazan
Paseo de la Reforma No. 265 Piso 2.Ocina SBC. Col.
Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico
LA_Sales@miniprinter.com
Yan xiao rui
Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town,
Songjiang District, Shanghai | China
sales@miniprinter.com
3
Disposal of Old Electrical&Electronic Equipment(Applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronics equipment. For more detailed information about recycling of this product, please contact your
local city oce, your household waste disposal service or the shop where you purchased the product.
2
1. Parts Identications 3
2. Setting up the printer 4
2.1 Unpacking 4
2.2 Connecting the cables 5
2.3 Loading the Roll Paper 8
2.4 Adjustment of paper width 11
3. Control panel and other functions 12
3.1 Control panel 12
3.2 Error Indicators 12
4. Self Test 13
5. ASCII Print 14
6. Select Baudrate Mode 14
7. Hexadecimal Dump 15
8. Printer cleaning 16
9. Specications 17
9.1. General Specications 17
9.2. Auto Cutter Specications 18
9.3. Interface 18
9.4. Electrical Characteristics 18
9.5. Environmental Requirements 19
9.6. Reliability 19
9.7. Certication 19
10. Command List 20
11. Utilities 22
12. S/W 23
Table of Contents
3
PRINTER COVER
POWER SWITCH
COVER OPEN LEVER
CONTROL PANEL
Open this cover to
load or replace paper.
Used to turn on/off
power to the printer.
Pull down this lever to
open the printer cover.
Features LED indicators
to indicate printer status
and switches to operate
the printer.
INTERFACE CONNECTOR INTERFACE CONNECTOR(USB)
PERIPHERAL DRIVE CONNECTOR
POWER CONNECTOR
1. Parts Identications
4
2. Setting Up the Printer
2-1. Unpacking
Your printer box should include these items. If any items are damaged or missing,
please contact your dealer for assistance.
PP
OO
WW
EE
RR
EE
RR
RR
OO
RR
PP
AA
PP
EE
RR
FEEDFEED
The Printer CD Roll Paper
Adaptor(Optional) Interface Cable(optional)
5
2-2. Connecting the Cables
You can connect up the cables required for printing to the printer.
They all connect to the connector panel on the back of the printer, which is shown below :
For connection to a
host computer.
For connection to a
host computer. For connection of
the AC adapter.
Never unplug the
AC adapter while
the printer is on.
Connects to peripheral units
such as cash drawers, etc.
Do not connect this to
a telephone.
INTERFACE CONNECTOR INTERFACE CONNECTOR(USB)
PERIPHERAL DRIVE CONNECTOR
POWER CONNECTOR
Before connecting any of the cables, make sure that both the printer and the com-
puter are turned o.
6
2-2-1. Interface Connector
4 3
21
9 Pin Serial USB “B” TYPE
9Pin Serial Interface
PIN SIGNAL I/O DESCRIPTION
2RxD Input Printer transmit data line RS-232C level
3TxD Output Printer receive data line RS-232C level
4, 7 DTR Output Printer handshake to host line RS-232C level
5GND -System Ground
6DSR Input Data Send Ready
1, 8, 9 NC - -
USB Interface
PIN SIGNAL I/O Description
1+5V -+5V
2DATA- -Printer transmit data line
3DATA+ -Printer transmit data line
4GND -System Ground
7
2-2-2. Cash Drawer Connector
The printer can operate two cash drawers with a 6 pin RJ-11 modular connector.
The driver is capable of supplying a maximum current of 0.1A for 510ms or less
when not printing.
61
PIN SIGNAL Description
1Signal GND -
2Drawer kick-out drive signal 1 Output
3Drawer open/close signal Input
4+24V -
5Drawer kick-out drive signal 2 Output
6Signal GND -
8
2-3. Loading the Roll Paper
• NOTE:
Be sure to use paper rolls that meet the specications. Do not use paper rolls
that have the paper glued to the core because the printer cannot detect the
paper end correctly.(Turn o power switch)
1 Make sure that the printer is not receiving data; Otherwise, data may be lost.
2 Open the paper roll cover by pushing down the cover open button.
PP
OO
WW
EE
RR
EE
RRRR
OO
RR
PP
AA
PP
EE
RR
FF
EEEE
DD
3 Remove the used paper roll core if there is one inside.
4 Insert new paper roll as shown.
P
O
W
E
R
E
R
R
O
R
P
A
P
E
R
F
E
E
D
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali SEWOO Stampante
SEWOO
SEWOO LK-P43 Manuale utente
SEWOO
SEWOO LK-P43II Manuale utente
SEWOO
SEWOO SLK-TS400EB Manuale utente
SEWOO
SEWOO LK-P21 Manuale utente
SEWOO
SEWOO LK-P30IIW Manuale utente
SEWOO
SEWOO LK-P41 Istruzioni per l'installazione
SEWOO
SEWOO SLK-TS100 Manuale utente
SEWOO
SEWOO LK-P12B Manuale utente
SEWOO
SEWOO LK-T210 Manuale utente
SEWOO
SEWOO LK-P20II Manuale utente
SEWOO
SEWOO LK-P30W Manuale utente
SEWOO
SEWOO LK-P34 Manuale utente
SEWOO
SEWOO SLK-T21EB Series Manuale utente
SEWOO
SEWOO LK-P21 Manuale utente
SEWOO
SEWOO LK-P31 Manuale utente
SEWOO
SEWOO SLK-TE21X Series Manuale utente
SEWOO
SEWOO SLK-T42 Manuale utente
SEWOO
SEWOO SLK-TE32 Series Manuale utente
SEWOO
SEWOO SLK-TE20 Series Manuale utente
SEWOO
SEWOO LK-P25 Manuale utente
