FW5870 User's Manual
M4051-01 ７
７７
７Seyeon Tech Co., Ltd
Audio Output(SPK)
Output Impedance : 230 Ohm
Output Power : 50 mW
Output Voltage : Peek To Peek 1 Volt
Jack : 3.5mm Stereo
Power Over Ethernet Not Supported
Serial Interface
Two serial ports for console, serial input/output device, PTZ
COM Port is RS-232
AUX port can be configured as RS-232, RS-485
Max Baud rate: 115200 bit/s
PIR Motion Sensor Not Supported
Security features Multi user level protection for camera access, PTZ, Alarm I/O
Advanced Service
Up to 19.2M memory for Pre/Post alarm buffer
e-mail, FTP, alarm Buffer by event or schedule
IP notification, Alarm Notification to e-mail,
CGI Call by event or schedule
Built-in Motion detections Accuracy : 12x12=144 blocks
Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive
PTZ & UART
Control Support
PTZ and UART device control through serial interface
(Support various protocols; Pelco “P” & “D”, Vicon V1311RB, Samsung PTZ, Honeywell
PTZ and X10)
Dial in/out via PSTN or GSM modem
Others Time stamp on Video
Transmit Serial input data transfer with video
IP notification by e-mail
Management Configurable by serial, web or telnet
Remote system update via telnet, FTP OR web browser.
Developer support Provides HTTP CGI API
ActiveX control development kit
PWR Supply Switch-mode power supply adaptor
Input : 100~240VAC, 1.5A
Output : DC 12 Volt, 5A, SMPS
PWR Consumption
DC 12Volt
Max or Peak : 3.5 A
Normal : 2.0 A
(with Seagate Barracuda ES.2 1 TBytes HDD installed)
Operating Environment Temperature : 32°~ 122°F (0°~ 50°C)
Humidity : 20 ~ 80% RH (non-condensing)
Miscellaneous Work with Smart NVR(CMS software)
Dynamic IP support through IPCCTVDNS Server
Simultaneous clients Live-cast for up to 16x8 Channel
Playback for up to 16 clients
Installation, management
