SGM ILD Manuale utente
ILD
2
ILD dimensions
All dimensions in mm.
Drawing not to scale.
3
ILD
USER MANUAL REV. 1
© 2012 SGMTM,QIRUPDWLRQVXEMHFWWRFKDQJHZLWKRXWQRWLFH6*0DQGDOODI¿OLDWHGFRP-
panies disclaim liability for any injury, damage, direct or indirect loss, consequential or
economic loss or any other loss occasioned by the use of, inability to use or reliance on
the information contained in this manual. The SGM logo, the SGM name and all other
WUDGHPDUNVLQWKLVGRFXPHQWSHUWDLQLQJWRVHUYLFHVRUSURGXFWVE\6*0RULWVDI¿OLDWHVDQG
VXEVLGLDULHVDUHWUDGHPDUNVRZQHGRUOLFHQVHGE\6*0RULWVDI¿OLDWHVRUVXEVLGLDULHV
English edition
4
5
Contents
Safety information.................................................................................................... 6
Overview.................................................................................................................. 8
Installing the ILD...................................................................................................... 9
Connecting AC power.............................................................................................11
Connecting to control data..................................................................................... 12
&RQ¿JXULQJWKHGHYLFH........................................................................................... 14
Service................................................................................................................... 16
6SHFL¿FDWLRQV ........................................................................................................ 17
6
Safety information
The ILD is intended for professional use only. It is not suitable for household use.
Review the following safety precautions carefully before installing or operating the device.
Preventing electric shock
Do not open the device; there are no user-serviceable parts inside.
Ensure that power is cut off when wiring the device to theAC mains supply.
Ensure that the device is electrically connected to earth (ground).
Do not apply power if the device is in any way damaged.
'RQRWLPPHUVHWKH¿[WXUHLQZDWHURUOLTXLG
DANGER! Risk of electric shock. Do not open the device.
WARNING! Read the safety precautions in this section before
installing, powering or operating this product.
7
Install only in a well-ventilated space.
Do not paint, cover, or modify the device.
Take precautions to prevent injury due to falls when working at height.
Ensure that the device is always securely fastened with suitable hardware.
For elevated installations, always comply with relevant load dimensioning and safety standards and
requirements.
WARNING! Take measures to prevent personal injury.
8
Overview
7KH,/'LVDQ$UWQHWSL[HOGULYHUWKDWFDQEHXVHGWRGULYHVL[6*0/7VWKUHH6*0/7RU6*0/('%DOO
SL[HOOXPLQDLUHV8SWR¿YH,/'VFDQEHFRQ¿JXUHGDQGFRQWUROOHGZKHQGDLV\FKDLQHGWRJHWKHUDQGFRQQHFWHGWRD
FRPSXWHUXVLQJDQ(WKHUQHWFDEOHDQGXSWR¿YH,/'¶VSHUSRUWFDQEHGDLV\FKDLQHGZKHQRQHRUPRUH(WKHUQHW
VZLWFKHVDUHXVHG,/'VFDQEHFRQ¿JXUHGXVLQJWKH6*0$UWQHW&RQ¿JXUDWRUDYDLODEOHIURPKWWSZZZVJPOLJKWFRP
and controlled using a lighting controller or computer-based Artnet controller.
8QSDFNWKHGHYLFHDQGLQVSHFWLWWRHQVXUHWKDWLWKDVQRWEHHQGDPDJHGLQWUDQVSRUW
7KH¿[WXUHLVQRWGHVLJQHGIRUSHUPDQHQWRXWGRRULQVWDOODWLRQEXWLWLV,3UDWHG7KLVPHDQVWKDWLWLVSURWHFWHGIURP
Dust, to the degree that there is no ingress of dust.
Lower pressure jets of water from any direction.
9
Installing the ILD
The ILD may be installed in any orientation.
%HIRUHLQVWDOOLQJ,/'VDWHOHYDWLRQHQVXUHWKDWWKH
$WWDFKPHQWKDUGZDUHLVLQJRRGFRQGLWLRQDQGGHVLJQHGWRVXSSRUWDWOHDVWWLPHVWKH¿[WXUH¶VZHLJKW
6WUXFWXUHFDQVXSSRUWDWOHDVWWLPHVWKHZHLJKWRIDOOLQVWDOOHG¿[WXUHV
Work area below is blocked from public access and make sure the work is performed from a stable platform.
:KHQXVLQJPRUHWKDQRQH,/'WRFUHDWHDQ/('FXUWDLQHQVXUHWKDWWKH,/'VDUHLQVWDOOHGVRWKDWWKHFRUUHFWSL[HO
pitch can be achieved.
$7%ROW%UDFNHWLVDYDLODEOHWRVXSSRUWDQ,/'ZKHQEROWHGWRDVXUIDFH)RURWKHUPRXQWLQJVROXWLRQVFRQVXOW\RXU
SGM representative.
WARNING! Always secure an elevated ILD with a safety cable as backup
10
T-bolt Bracket
8VHWZR7%ROW%UDFNHWVWRDWWDFKDQ,/'WRDÀDWVXUIDFH7KHVHEUDFNHWVDUH
secured to the mounting surface using three pieces of M6 hardware. To attach
an ILD to a bracket, slide the t-bolts into the attachment rail in the ILD casing
(A), turn the bolt 90 degrees so that its head is under the rail rim, and then
VHFXUHE\WLJKWHQLQJWKHQXW%
Indice
Altri manuali SGM Attrezzatura per DJ
SGM
SGM Idea Par LED Zoom RGB Manuale utente
SGM
SGM P-10 Manuale utente
SGM
SGM X-5 Manuale utente
SGM
SGM Giotto profile 400 Manuale utente
SGM
SGM PALCO 3+ Manuale utente
SGM
SGM P Series Manuale utente
SGM
SGM Idea spot 575 Manuale utente
SGM
SGM G-Spot Turbo Manuale utente
SGM
SGM TLD-612 Manuale utente
SGM
SGM P-5 Series Manuale utente
SGM
SGM G-1 BEAM Manuale utente
SGM
SGM P-5 Wash Light Manuale utente
SGM
SGM VPL1220-20 Manuale utente
SGM
SGM Q?7 Manuale utente
SGM
SGM G-Wash Manuale utente
SGM
SGM P-1 Manuale utente
SGM
SGM P-10 Manuale utente
SGM
SGM SP-6 SIXPACK Manuale utente
SGM
SGM MOVING HEADS SERIES Manuale utente
SGM
SGM P-6 Manuale utente
