SGM G-PROFILE Manuale utente
G‐PROFILE
MOVINGHEAD
Manual_G_Profile_EN_170x113,3.book Page 1 Wednesday, December 9, 2015 10:17 AM
2
Dimensions
135°
270° 270°
805
(31.7)
646
(25.4)
494
(19.5)
144
(5.7)
327
(12.9)
821
(32.3)
Min. c/c
764
(30.0)
492
(19.4)
470
(18.5)
664
(26.2)
135°
340
(13.4)
370
(14.6)
16 (0.63)
37 (1.46)
Measurements in millimetres
and inches (in brackets).
Drawing not to scale.
Manual_G_Profile_EN_170x113,3.book Page 2 Wednesday, December 9, 2015 10:17 AM
3
G‐PROFILE
USERMANUAL
© 2015 SGM Light®. Information subject to change without notice. SGM Light and
all affiliated companies disclaim liability for any injury, damage, direct or indirect
loss, consequential or economic loss or any other loss occasioned by the use of,
inability to use or reliance on the information contained in this manual.
The SGM logo, the SGM Light name and all other trademarks in this document
pertaining to services or products by SGM Light or its affiliates and subsidiaries are
trademarks owned or licensed by SGM Light or its affiliates or subsidiaries.
The original edition of this document is in English. All other language editions are
translations of the original edition.
This edition applies to firmware version 1.59 or later.
Rev. D
Manual_G_Profile_EN_170x113,3.book Page 3 Wednesday, December 9, 2015 10:17 AM
4
Dimensions ........................................................................................................................2
Safety information ..............................................................................................................7
Overview ..........................................................................................................................10
Unpacking ........................................................................................................................11
Transportation ............................................................................................................................................................... .11
Installation / Rigging .........................................................................................................12
Connecting AC power ......................................................................................................14
Control panel operations ..................................................................................................15
Using the control panel ................................................................................................................................................. .15
DMX start address ........................................................................................................................................................ .15
Selecting module (G-Profile or G-Spot) ........................................................................................................................ .15
Configuring the fixture using an Android device via RFID ............................................................................................ .16
SGM Tool App for Android ............................................................................................................................................ .16
Getting fixture information using Android and RFID ..................................................................................................... .16
Setting a DMX address and mode using Android and RFID ........................................................................................ .16
Contents
Manual_G_Profile_EN_170x113,3.book Page 4 Wednesday, December 9, 2015 10:17 AM
5
Using stand-alone operation ............................................................................................17
Manual control / Internal sequence editor ..................................................................................................................... .17
Using the editor ............................................................................................................................................................. .18
Editor ............................................................................................................................................................................ .18
Connecting to a DMX control device ................................................................................19
Configuring the device for DMX control ...........................................................................20
About DMX ................................................................................................................................................................... .20
Setting the DMX address .............................................................................................................................................. .20
LED refresh rate (Frequency) ..........................................................................................21
About LED refresh rate ................................................................................................................................................. .21
Setting the LED refresh rate (Frequency) via DMX ...................................................................................................... .21
Control panel menus ........................................................................................................22
Gobo replacement ............................................................................................................34
Identification of gobo wheel .......................................................................................................................................... .34
Replacing rotating gobo ................................................................................................................................................ .35
How to replace a gobo in a gobo holder ....................................................................................................................... .36
Maintenance .....................................................................................................................37
Upgrading the firmware ................................................................................................................................................ .37
Cleaning ........................................................................................................................................................................ .37
Manual_G_Profile_EN_170x113,3.book Page 5 Wednesday, December 9, 2015 10:17 AM
6
DMX protocols ..................................................................................................................38
Standard Mode ............................................................................................................................................................. .38
Extended Mode ............................................................................................................................................................. .51
Full Color Calibration and Color Temperature Correction ............................................................................................ .64
Effects ..............................................................................................................................65
Four individually controllable framing blades ................................................................................................................ .65
Independent rotating gobo wheel ................................................................................................................................. .65
Combination of framing techniques and rotating gobos ............................................................................................... .65
Effect wheel .................................................................................................................................................................. .66
High-precision pan and tilt ............................................................................................................................................ .66
Ultra high-speed strobe effect ....................................................................................................................................... .66
Prism ............................................................................................................................................................................. .66
Frost .............................................................................................................................................................................. .66
Fixtures and accessories .................................................................................................67
Included items ............................................................................................................................................................... .67
Ordering information ..................................................................................................................................................... .67
User’s notes .....................................................................................................................69
Manual_G_Profile_EN_170x113,3.book Page 6 Wednesday, December 9, 2015 10:17 AM
7
Safety information
The G-Profile is intended for professional use only. It is not suitable for household use. Impropre a l’usage domestique.
Review the following safety precautions carefully before installing or operating the fixture.
This product must be installed in accordance with the applicable installation code by a person familiar with the construction
and operation of the product and the hazards involved. Ce produit doit être installé selon le code d’installation pertinent,
par une personne qui connaît bien le produit et son fonctionnement ainsi que les risques inhérent.
Preventing electric shock
• Always power off/unplug the fixture before removing covers or dismantling product.
• Ensure that the mains power is off when wiring the fixture to the AC mains supply.
• Ensure that the fixture is electrically connected to earth (ground).
• Do not apply power if the fixture is in any way damaged.
• Do not immerse the fixture in water or liquid.
WARNING! Read the safety precautions in this section before
unpacking, installing, powering or operating this product.
WARNING! Risk of electric shock.
Manual_G_Profile_EN_170x113,3.book Page 7 Wednesday, December 9, 2015 10:17 AM
8
Preventing burns and fire
• Install in a location that prevents accidental contact with the fixture.
• Install only in a well-ventilated space.
• Install at least 0.3 m (12 in.) away from objects to be illuminated.
• Install only in accordance with applicable building codes.
• Ensure a minimum clearance of 0.1 m (4 in.) around the cooling fans.
• Do not paint, cover or modify the fixture.
• Keep all flammable materials away from the fixture.
• Allow the fixture to cool for 15 minutes after operation, before touching it.
CAUTION: Exterior surface temperature after 5 min. operation = 55° C (131° F). Steady state = 65° C (149° F)
WARNING! Take measures to prevent burns and fire.
Manual_G_Profile_EN_170x113,3.book Page 8 Wednesday, December 9, 2015 10:17 AM
9
Avoid personal injury
• Do not look directly at the light source from close range.
• Take precautions to prevent injury when working at height.
• Ensure that the fixture is always securely fastened with suitable hardware.
• For elevated installations, secure the fixture with suitable safety cables, and always comply with relevant load
dimensioning, safety standards and requirements.
WARNING! Take measures to prevent personal injury.
Manual_G_Profile_EN_170x113,3.book Page 9 Wednesday, December 9, 2015 10:17 AM
10
Overview
J
I
H
F
K
E
FC
A
C
D
G
B
A:Panlock
B:Tiltlock
C : Base handle
D : Head fan grill (one of two shown)
E : Display panel
F : Safety wire attachment point
G:Fuse
H:DMXin
I : DMX out
J:Powerin
K : Power cord
The SGM G-Profile model is a framing version of the G-Spot Moving Head.
The G-Profile is a maintenance free, multi-environmental fixture with an IP-rating
of 65. It has a powerful LED light source, and a virtually unlimited color palette, four
individually controllable framing blades, and can easily be controlled by wired and
wireless DMX. The fixture also offers RFID and NFC, low power consumption and an
expected lifetime of the multiple LED’s of 50,000 hours*.
* At 70% of luminous output under the manufacturer’s test conditions.
Manual_G_Profile_EN_170x113,3.book Page 10 Wednesday, December 9, 2015 10:17 AM
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali SGM Proiettore
