SGM Q?2 White Manuale utente
Q‐2
Q‐2WHITE
Manual_Q2-Q2W_170x113,3.book Page 1 Wednesday, March 18, 2015 2:21 PM
2
Q-2 / Q-2 W Dimensions
Measurements in millimetres
and inches (in brackets).
Drawing not to scale.
Manual_Q2-Q2W_170x113,3.book Page 2 Wednesday, March 18, 2015 2:21 PM
3
Q‐2/Q‐2W
USERMANUAL
© 2015 SGM®. Information subject to change without notice. SGM and all
affiliated companies disclaim liability for any injury, damage, direct or indirect loss,
consequential or economic loss or any other loss occasioned by the use of,
inability to use or reliance on the information contained in this manual.
The SGM logo, the SGM name and all other trademarks in this document
pertaining to services or products by SGM or its affiliates and subsidiaries are
trademarks owned or licensed by SGM or its affiliates or subsidiaries.
The original edition of this document is in English. All other language editions are
translations of the original edition.
This edition applies to firmware version 1.10 or later.
Ver. B
Manual_Q2-Q2W_170x113,3.book Page 3 Wednesday, March 18, 2015 2:21 PM
4
Q-2 / Q-2 W Dimensions ....................................................................................................2
Safety information ..............................................................................................................7
Introduction ......................................................................................................................10
Parts identification and terminology .................................................................................11
Preparing for installation ..................................................................................................12
Installing the Q-2 / Q-2 W .................................................................................................13
Connecting AC power ......................................................................................................15
Configuring the fixture ......................................................................................................16
Setting a static color manually .........................................................................................17
Using stand-alone operation ............................................................................................18
Connecting to a DMX control device ................................................................................19
Contents
Manual_Q2-Q2W_170x113,3.book Page 4 Wednesday, March 18, 2015 2:21 PM
5
Configuring the fixture for DMX control ............................................................................20
About DMX .................................................................................................................................................................... 20
Setting the DMX address............................................................................................................................................... 20
Setting the DMX mode................................................................................................................................................... 21
Full Color Calibration and Color Temperature Correction (Q-2 only) ............................................................................ 23
Fixture personality settings ..............................................................................................24
Setting the dimming curve ............................................................................................................................................. 24
Flipping the OLED display ............................................................................................................................................. 24
Setting the OLED display saver..................................................................................................................................... 24
Setting the fan mode...................................................................................................................................................... 25
Service .............................................................................................................................26
Upgrading the firmware ................................................................................................................................................. 26
Cleaning......................................................................................................................................................................... 26
DMX protocols ..................................................................................................................27
Q-2 DMX protocols ........................................................................................................................................................ 27
Q-2 W DMX protocols.................................................................................................................................................... 40
Control menu ....................................................................................................................49
Fixtures and accessories .................................................................................................55
Ordering information ...................................................................................................................................................... 55
Manual_Q2-Q2W_170x113,3.book Page 5 Wednesday, March 18, 2015 2:21 PM
6
User’s notes .....................................................................................................................57
Manual_Q2-Q2W_170x113,3.book Page 6 Wednesday, March 18, 2015 2:21 PM
7
Safety information
The Q-2 / Q-2 W is a multi-environmental fixture with an IP-rating of 65, intended for professional use only. It is not suitable
for household use. Impropre a l’usage domestique.
Review the following safety precautions carefully before installing or operating the fixture.The fixture must be installed in
accordance with the applicable installation code by a person familiar with the construction and operation of the fixture and the
hazards involved.Ce produit doit être installé selon le code d’installation pertinent, par une personne qui connaît bien
le produit et son fonctionnement ainsi que les risques inhérent.
Preventing electric shock
• Always power off/unplug the fixture before removing any covers.
• Ensure that the power is turned off when connecting the fixture to the AC mains supply.
• Ensure that the fixture is electrically connected to earth (ground).
• Do not apply power if the fixture is in any way damaged.
• Do not immerse the fixture in water or liquid.
WARNING! Read the safety precautions in this section before, unpacking,
installing, powering or operating this fixture.
WARNING! Risk of electric shock.
Manual_Q2-Q2W_170x113,3.book Page 7 Wednesday, March 18, 2015 2:21 PM
8
Preventing burns and fire
• Install in a location that prevents accidental contact with the fixture.
• Install only in a well-ventilated space.
• Install at least 0.3 m (12 in.) away from objects to be illuminated.
• Install only in accordance with applicable building codes.
• Ensure a minimum clearance of 0.1 m (4 in.) around the cooling fans.
• Do not paint, cover or modify the fixture.
• Keep all flammable materials away from the fixture.
• Allow the fixture to cool for 15 minutes after operation, before touching it.
CAUTION: Exterior surface temperature after 5 min. operation = 45°C (113°F). Steady state = 60°C (140°F).
WARNING! Take measures to prevent burns and fire.
Manual_Q2-Q2W_170x113,3.book Page 8 Wednesday, March 18, 2015 2:21 PM
9
Avoid personal injury
• Do not look directly at the light source from close range.
• Take precautions to prevent injury due to falls when working at height.
• For permanent installation, ensure that the fixture is securely fastened to a load-bearing surface with suitable
corrosion-resistant hardware.
• For temporary installation with clamps, ensure that the quarter-turn fasteners are turned fully and secured with a suitable
safety cable. The cable must be approved for a safe working load (SWL) of 10 times the weight of the fixture, and it must
have a minimum gauge of 2 mm.
WARNING! Take measures to prevent personal injury.
Manual_Q2-Q2W_170x113,3.book Page 9 Wednesday, March 18, 2015 2:21 PM
10
Introduction
The Q-2 is a low-profile, compact IP65-rated, full-color LED flood light, incorporating 432 RGB + 432 White LEDs divided into
3 individually controllable segments for wide ranging color and effect combinations.
The Q-2 W is a low-profile, compact IP65-rated cool white flood light, incorporating 432 cool white LEDs divided into 12
individually controllable segments for wide ranging effect combinations.
Both fixtures offer dimming, a (half-peak) spread angle of 110°, and a lamp life expectancy of 50,000 hours*. In addition, the
Q-2 offers RGBW color mixing and color temperature control.
This manual covers installation, use and maintenance of the Q-2 / Q-2 W. All documentation is also available from the SGM
web-site: http://www.sgmlight.com
* At 70% of luminous output under the manufacturer’s test conditions.
Manual_Q2-Q2W_170x113,3.book Page 10 Wednesday, March 18, 2015 2:21 PM
Altri manuali per Q?2 White
2
Indice
Altri manuali SGM Proiettore
