Sharp FX-J80U Manuale di istruzioni
FX-J80U AIR PURIFIER
Wi-Fi CONNECT GUIDE
PURIFICADOR DE AIRE
GUÍA DE CONEXIÓN Wi-Fi
ENGLISHESPAÑOL
FX-J80U_Wi-Fi_EN.indd 1 2019/10/25 14:09:06
CONTENTS
SHARP AIR APPLICATION............................................................. EN-1
BEFORE YOU BEGIN ..................................................................... EN-1
PART NAMES.................................................................................. EN-2
FLOW OF INITIAL SETTINGS ........................................................ EN-3
INITIAL CONNECTION SETTINGS
1 DOWNLOAD & SIGN UP............................................................... EN-3
2CONNECTION OF THE AIR PURIFIER AND A ROUTER ................ EN-4
3
CONNECTION BETWEEN THE AIR PURIFIER AND A SMART DEVICE
EN-8
TROUBLESHOOTING..................................................................... EN-9
ENGLISH
“Wi-Fi®” is a registered trademark of Wi-Fi Alliance®.
“Android” is the trademark of Google Inc.
“iPhone”, “iPod touch”, “iPad” are the registered trademarks or trademarks of Apple Inc.
The other company names, corporate names, product names mentioned in the handling instructions are
trademarks and registered trademarks of each company.
TRADEMARKS
FX-J80U_Wi-Fi_EN.indd 2 2019/10/25 14:09:11
EN-1
ENGLISH
The Sharp Air application is a helpful tool that puts you in control of your indoor air
quality.
With the Sharp application,
• You can control your air purier from anywhere with your smart device to do things like
turn the air purier on and o, set a weekly schedule, and more!
• You can monitor indoor air quality in real time to stay in control, even if you're not
home.
• You can monitor remaining lter life and receive alerts when it's time to replace the
lters.
• You can enable and disable the optional, "Sharp Cloud" feature. When enabled, your
usage history will be used to adjust the Sensor Sensitivity settings of "Auto" Mode over
time in order to optimize your Air Purier's performance.
BEFORE YOU BEGIN
Ensure your smart device is connected to a 2.4 GHz Wi-Fi Network.
• Wi-Fi Protected Setup (WPS) Access Point (Router)
The recommended encryption method is WPA2 (AES).
• Ensure your smart device meets minimum software requirements:
Smartphones / tablets of Android 8 or later
iPhones, iPod touch, iPads of iOS 12 or later
Scan the QR code for more
information about the Sharp
Air Application or visit
sharpusa.com
SHARP AIR APPLICATION
FX-J80U_Wi-Fi_EN.indd 1 2019/10/25 14:09:13
EN-2
PART NAMES
123456
1. POWER ON/OFF Button
2. Wi-Fi Button
3. AUTO Button
4. PLASMACLUSTER EXPRESS CLEAN Button
5. Plasmacluster Ion SPOT Button
6. FAN SPEED Button
7. DISPLAY
8. SHARP CLOUD Indicator
Illuminates when air purier is connected to Sharp's cloud service.
9. Wi-Fi Indicator
Illuminates when air purier is connected to a router.
FRONT DISPLAY
OPERATION PANEL
89 7
FX-J80U_Wi-Fi_EN.indd 2 2019/10/25 14:09:19
EN-3
ENGLISH
1. Install the Sharp Air application to
your smart device.
• Available to download from the Apple Store
or Google Play.
2. Launch the Sharp Air application.
3. Review the “Privacy and Data
Utilization Policy” and “Terms of
Use.” Once you review, check the
boxes and select “Agree and
Continue”.
4. Enter Your Date of Birth and select
“SUBMIT”.
1DOWNLOAD & SIGN UP
INITIAL CONNECTION SETTINGS
FLOW OF INITIAL SETTINGS
5. Sign in using your Sharp account
(Sharp ID) or click “Sign up” to
register if you are a new user.
• If you already have a Sharp account, enter
veri ed credentials and select “Sign in”.
• If you do not have a Sharp account, select
“Sign up” and follow on-screen instructions.
6. Enter a name for your smart device
and tap “Save”.
• The model name of your smart device will
display.
XXXXXXXXX
1DOWNLOAD & SIGN UP
2CONNECTION OF THE AIR PURIFIER AND A ROUTER
3CONNECTION BETWEEN THE AIR PURIFIER AND A SMART DEVICE
NOTE: When pairing the smart device to the air puri er, please ensure they are both connected to
the same router.
FX-J80U_Wi-Fi_EN.indd 3 2019/10/25 14:09:30
EN-4
2CONNECTION OF THE AIR PURIFIER AND A ROUTER
INITIAL CONNECTION SETTINGS
1. Tap “ ” at the upper left part of the
“Home” screen, and select “Pairing”
→ “Connection with a router”.
2. Select “With Wi-Fi Protected Setup
(WPS) button” → “Air Purifi er” →
Select “FXJ80U”.
Please check whether the Wi-Fi Protected Setup (WPS) button function is available on the router.
If Wi-Fi Protected Setup (WPS) button is available: Proceed to (A)
If Wi-Fi Protected Setup (WPS) button is not available: Proceed to (B)
(A) The Wi-Fi Protected Setup (WPS) button function is available on the router.
3. Please follow instructions on
the app.
i. Hold down the Wi-Fi button for 3
seconds with the product ON.
ii. Within 2 minutes, press the Wi-Fi
Protected Setup (WPS) button of
the router.
• Please refer to the router operation manual
for how to handle the Wi-Fi Protected Setup
(WPS) button.
iii.
A melody will sound, and the Wi-Fi
indicator will light up.
• It may take a few minutes to complete the
connection settings.
• If the connection settings cannot be
completed, it will beep 4 times and the light
of Wi-Fi indicator will be o . In that case,
please try again from Step 1.
iv.
Tap “NEXT”.
Page 8, Step 3
FX-J80U_Wi-Fi_EN.indd 4 2019/10/25 14:09:43
EN-5
ENGLISH
ii. Select with the
PLASMACLUSTER EXPRESS
CLEAN button, and confi rm with
the AUTO button.
iii.
Select with the
PLASMACLUSTER EXPRESS
CLEAN button, and confi rm with
the AUTO button.
iv.
Wi-Fi indicator and will blink.
Android Devices
Tap “NEXT”.
iOS Devices
Tap “NEXT” after
confi rming the
application screen.
2CONNECTION OF THE AIR PURIFIER AND A ROUTER
1. Tap “ ” at the upper left part of the
“Home” screen, and select “Pairing”
→ “Connection with a router”.
2. Select “Without Wi-Fi Protected
Setup (WPS) button” → “Air Purifi er”
→ Select “FXJ80U”.
3. Follow instructions on the app.
i. Hold down the FAN SPEED button
for 3 seconds with the product
OFF.
(B)
The Wi-Fi Protected Setup (WPS) button function is not available on the router.
Page 6
Page 7
FX-J80U_Wi-Fi_EN.indd 5 2019/10/25 14:10:15
EN-6
7. If following screen displays and
Wi-Fi indicator turns ON, your air
purifi er has successfully connected
to the router.
• It may take a few minutes to complete the
connection settings.
• If the connection settings cannot be
completed, the air puri er will beep 4 times
and the Wi-Fi indicator light will be o . In
that case, please try again from Step 1 on
page 5.
8. Once connected, press POWER
ON/OFF button on your air purifier,
and tap “NEXT”.
INITIAL CONNECTION SETTINGS
Android Devices
4. Please confirm the model name of
the air purifier you want to connect
with router, then tap “NEXT”.
5. Select the router.
6. Enter router password then
tap “NEXT”.
Page 8, Step 3
2CONNECTION OF THE AIR PURIFIER AND A ROUTER
(B)
The Wi-Fi Protected Setup (WPS) button function is not available on the router.
FX-J80U_Wi-Fi_EN.indd 6 2019/10/25 14:10:23
EN-7
ENGLISH
6. Please input SSID and password of
the router then tap “NEXT”.
7. If following screen displays and
Wi-Fi indicator turns ON, your air
purifier has successfully connected
to the router.
• It may take a few minutes to complete the
connection settings.
• If the connection settings cannot be
completed, your air puri er will beep 4 times
and the Wi-Fi indicator light will be o . In
that case, please try again from Step 1 on
page 5.
8. Once connected, press POWER ON/
OFF button on your air purifi er, and
tap “NEXT”.
iOS Devices
4. 1Select Wi-Fi setting of your iOS
device.
2Select “AP-SHARP-XX”.
• XX is the last two letters of
the MAC address. Please refer
to Page 20 of the air purifier
Operation Manual when you want
to check the MAC address of your
air purifer.
3Once connected to AP-SHARP-XX,
return to the Sharp Air application.
5. Please confi rm the model name of
the air purifi er you want to connect
with router, then tap “NEXT”.
××
Page 8, Step 3
2CONNECTION OF THE AIR PURIFIER AND A ROUTER
(B)
The Wi-Fi Protected Setup (WPS) button function is not available on the router.
FX-J80U_Wi-Fi_EN.indd 7 2019/10/25 14:10:26
EN-8
1. Connect your smart device to the
same router as the air purifi er.
2. Tap “ ” at the upper left part of the
“Home” screen of the Sharp Air
application, and select “Already
connected with a router”.
3. Tap “Pair” for the air purifi er you
would like to pair.
4. Enter the air purifi er information and
tap “Save”.
• The Wi-Fi indicator of the air puri er will
blink.
* This screen will not be displayed, in case
the air puri er has been already registered
with other smart devices.
INITIAL CONNECTION SETTINGS
3
CONNECTION BETWEEN THE AIR PURIFIER AND A SMART DEVICE
5. Press the Wi-Fi button on the air
purifi er within 3 minutes.
6. The melody will sound, and the
Wi-Fi indicator will light up.
• If the settings cannot be completed, the
air puri er will beep 4 times, and the Wi-Fi
indicator will light up. In this case, please try
again from Step 2.
* For details of the application operating
procedure, please refer to “HELP” on the
application.
The initial settings are completed.
FX-J80U_Wi-Fi_EN.indd 8 2019/10/25 14:10:31
Altri manuali per FX-J80U
1
Indice
Lingue:
Altri manuali Sharp Purificatore d'aria
Sharp
Sharp Plasmacluster FP-N25CX Manuale utente
Sharp
Sharp FU-A80TA Manuale utente
Sharp
Sharp KC-D60EU-W Manuale utente
Sharp
Sharp FU-P60S-E Manuale utente
Sharp
Sharp FP-F30Y Manuale utente
Sharp
Sharp FP-G50Y Manuale utente
Sharp
Sharp UA-PF40E Manuale utente
Sharp
Sharp KI-L60TA Manuale utente
Sharp
Sharp Plasmacluster IG-CH2J Manuale utente
Sharp
Sharp FU-W40A Manuale utente
Sharp
Sharp FP-R30CX Manuale utente
Sharp
Sharp QNET ZENsational KC-G60M-W Manuale utente
Sharp
Sharp FP-J40TA Manuale utente
Sharp
Sharp IG-A20A? IG-A40A Manuale utente
Sharp
Sharp KC-A50EU Manuale utente
Sharp
Sharp Plasmacluster KC-860U Manuale utente
Sharp
Sharp Plasmacluster KC-850U Manuale utente
Sharp
Sharp UA-HG30E Manuale utente
Sharp
Sharp KCF31RW Manuale utente
Sharp
Sharp Plasmacluster IG-CL15U Guida all'installazione
