Operating Instructions
Thank you for purchasing our projector – you can now enjoy your new device and its wide variety of
functions! Before operating your new device, please thoroughly read through this manual and retain it for
future reference. It is important that you follow all safety instructions carefully to ensure proper operation of
your device. If there are any discrepancies between this manual and your product, please contact our
customer support service. Safety Precautions
In order to ensure your safety, as well as the maximum longevity of your device, please take note of the
following precautions:
Do not connect any defect cables, accessories or other defected external devices
Ensure the device is switched off and disconnected from the power supply before cleaning. Use a
soft, lint-free cloth for cleaning. Never use liquids, gaseous or easily flammable cleansers (sprays,
abrasives, polishes, alcohol).
Ensure no moisture ever leaks into the interior of the device –if it does, switch off the device and
disconnect it from the power supply immediately.
Always handle the product with care.
The device can become hot when used for extended periods of time – do not stand the device on any
parts of your body to prevent discomfort or injury arising from contact with the device.
Avoid touching the lens.
Never place heavy or sharp objects on the device or the power cable.
Prevent the device from coming into contact with direct sunlight, heat, temperature fluctuations, and
moisture. Do not place the device next to heaters or air conditioners.
Do not use the device during thunderstorms.
Do not make any repairs to the device by yourself. Improper maintenance can result in injuries or
damage to the device. Have your device repaired only by an authorized service center.
Do not remove the type label from your device; this will void the warranty.
Do not place the device on fabric surfaces such as tablecloths or carpets and do not cover the
ventilation slits. This may cause the device to overheat.
The ideal functioning temperature for the device is between 5℃ to 40℃.
Use only the power adapter provided. Check whether the electrical voltage of the power supply
matches the electrical voltage available at the setup location.
Risk of Eye Damage
This device is equipped with a high power LED (Light Emitting Diode), which emits very bright light. Do not
stare directly into the projector lens to avoid eye injury or irritation.
Transportation Precautions
Disconnect all peripheral devices from the projector before transport.
Confirm the projector is switched off before transport.
