Shure PGXD Series Manuale utente
1/21
PGXD -- Wireless System
Quick Start
Shure Incorporated
2/21
Shure Incorporated
3/21
Shure Incorporated
4/21
Shure Incorporated
5/21
General Description
Offering uniquely tailored wireless solutions for vocalists, guitarists, and
presenters, PGX-Digital combines the trusted legacy of Shure wired micro-
phones with state-of-the-art, 24-bit digital wireless technology to deliver
strong, clean RF performance. The result is wireless audio that sounds like
wired, rock-steady RF signal even at extended distances, and plug-and-
play setup and operation.
•Professional quality 24-bit digital audio
•Digital RF technology for rock-solid performance
•Wide variety of rugged and dependable Shure microphones
•One-touch setup and operation
•Up to 10 hours of battery life (9 hours, PGXD2)
•Up to 200 foot range (line-of-sight)
• 900 MHz operation—free from white spaces or DTV interference
System Components
All systems include
•PGXD4 receiver
•2 AA alkaline batteries
•Power supply
•User guide
Vocalist systems include
•PGXD2 handheld transmitter
•Microphone head (choice of PG58, SM58®, SM86, Beta 58A® or Beta 87A*)
Available only in select markets
•Microphone clip
Lavalier, Headworn, and Instrument systems include
•PGXD1 bodypack transmitter
•Microphone (choice of WL93, WL185, PG30 or Beta 98H/C)
Guitar systems include
•PGXD1 bodypack transmitter
Shure Incorporated
6/21
• 1/4” to mini 4-pin guitar cable (WA302)
Receiver Controls and Connectors
Front Panel
1. audio LED: Indicates strength of incoming audio signal: green for normal, amber for strong and red for clipping.
2. LED Screen: Displays group and channel setting. See "Single System Setup" for details.
3. channel button: Changes group and channel setting. See "Single System Setup" for details.
4. ready LED: Indicates system ready and receiving an RF signal from the transmitter. Also indicates battery level
of the transmitter:
◦Green = transmitter battery level normal
◦Red = low battery (typically less than 60 minutes with alkaline batteries)
with NiMH rechargeable batteries, when the indicator turns red there will be little to no remaining life.
5. Infrared (IR) port: Sends IR signal to transmitter for sync.
6. sync button: Press to synchronize transmitter with receiver group and channel settings.
7. AC adapter jack
8. Adapter cord tie-off
9. XLR microphone output jack
10. 6.35 mm (¼") instrument level output jack
Back Panel
Shure Incorporated
7/21
Transmitter Controls and Connectors
①Indicator LED: Displays battery level, mute, and IR transmission status (see table).
②Power/Mute Switch: Press to mute or unmute. Press and hold to power on or off.
③Infrared (IR) port: Receives infrared beam to synchronize frequencies. When using multiple systems, only
one transmitter IR port should be exposed at a time.
④4-Pin Microphone Input Jack
⑤Audio Gain Adjustment
Transmitter Indicator LED
Shure Incorporated
8/21
LED Indicator Status
Green Ready
Flashing green Controls locked
Amber Mute on
Solid red Battery power low
Flashing red Batteries dead (change batteries to power on trans-
mitter)
Rapidly flashing red IR transmission in process
Flashing amber and red Battery power low and mute on
Batteries
•A fresh set of alkaline batteries lasts up to 10 hours (9 hours, PGXD2).
•The transmitter LED and the receiver ready LED glow red to indicate low battery (typically less than 60 minutes
remaining).
•NiMH rechargeable batteries may be used. However, the low battery indicator functions differently. When it
turns red, there may be little to no remaining life.
•When the LED flashes red, the batteries must be replaced to power on the transmitter.
Wearing the Bodypack Transmitter
Clip the transmitter to a belt or slide a guitar strap through the transmitter clip as shown.
For best results, the belt should be pressed against the base of the clip.
Shure Incorporated
9/21
Adjusting Levels
Adjusting Gain
For best audio quality, set transmitter gain so the audio LED on the receiver flickers green and amber during the
performance. Decrease gain if the signal clips (LED turns red).
The amber LED may appear to be red when viewed at an angle. For best results, monitor the LED from directly in
front.
Bodypack Transmitter
The bodypack has 26 dB of audio gain adjustment.
•Increase gain (clockwise +) for microphones
• Decrease gain (counterclockwise –) for guitars or high-output instruments
Shure Incorporated
10/21
Handheld Transmitter
Access the gain switch by unscrewing the head of the microphone.
Use the tip of a pen or a small screwdriver to move the switch.
•0dB: For quiet to normal vocal performance.
•-10dB: Use only if audio is distorted due to high vocal levels.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Shure Sistema microfonico
Shure
Shure BLX1 Manuale utente
Shure
Shure DDS 5900 Manuale utente
Shure
Shure BLX4R Manuale utente
Shure
Shure ANTENNA SETUP Manuale utente
Shure
Shure KCX Scheda tecnica
Shure
Shure PGXD Manuale utente
Shure
Shure M4 Manuale del proprietario
Shure
Shure M44C Manuale utente
Shure
Shure BLX4R Manuale utente
Shure
Shure SLX Wireless System Manuale utente
Shure
Shure SVX Wireless Manuale utente
Shure
Shure ULXP4E K2E Manuale utente
Shure
Shure MX890 Manuale utente
Shure
Shure BLX188CVLM17 Manuale utente
Shure
Shure ULXD-G51 Manuale utente
Shure
Shure R6 Manuale del proprietario
Shure
Shure Performance Gear Manuale utente
Shure
Shure BLX88 Manuale utente
Shure
Shure PSM 900 Manuale utente
Shure
Shure Performance Gear Manuale utente
Manuali Sistema microfonico popolari di altre marche
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuale utente
Alpha Technologies
Alpha Technologies RBMS Manuale utente
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manuale utente
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuale utente
Pyle
Pyle PDWM5000 Manuale utente
Airspan
Airspan AS4000 Guida