Shure ROSWELLITE KSM313 Manuale utente
USER GUIDE
KSM313
ROSWELLITE™
RIBBON MICROPHONE
FEATURES
GENERAL DESCRIPTION
Legendary Shure quality and superior construction from•
hand-assembly of machined steel, silver, gold and aluminum
components
Revolutionary Roswellite™ ribbon material replaces traditional foil•
ribbons with high tensile strength, toughness and shape memory
that provides superior resilience at extreme SPLs
30 – 15,000 Hz frequency response ideal for capturing vocals,•
acoustic and amplified instruments
Uniform bidirectional polar pattern throughout the frequency range•
True “Dual-Voice” ribbon motor assembly, tuned specifically•
for user’s choice of frequency response: address the front for
warm and full sounding amplifiers, or swivel around for bright and
flattering vocals
Custom-wound double-shielded full-size transformer minimizes•
signal loss and RF interference, and maximizes output
Protective mahogany case included for storage•
Monocle stand mount for versatile placement and orientation•
The KSM313 is a premium bidirectional ribbon microphone for
world-class audio and performance. The “Dual-Voice” design
features discrete front-and-rear side sonic signatures for use with
many amplified instruments or in intimate vocal applications.
These microphones are hand assembled in the U.S.A. from state-
of-the art transducers, transformers and metals as the pinnacle of
Shure quality for prestigious vocal and acoustic performances.
Revolutionary Roswellite™ ribbon material replaces traditional foil
ribbons with high tensile strength, toughness and shape memory
that provides superior resilience at extreme SPLs.
©2009 Shure, Inc.
27A13255
Printed in U.S.A.
N108
PERFORMANCE CHARACTERISTICS
The KSM313, like all ribbon microphones, performs optimally with
the least amount of loading on the ribbon element as practical.
The higher the impedance input on the microphone, the better the
low-end and mid-range frequencies are represented in the output
signal. We recommend using preamps with impedance settings of
1000 Ohms or more.
The KSM313 is a low-noise microphone. The combination of its
efficient transducer, robust shielding, and custom transformer give
the microphone a low noise floor and output level equal to moving
coil microphones. Certain ribbon designs have weaker magnets
and less shielding, and require additional gain for optimum perfor-
mance. This is not the case with the KSM313. Most professional
level preamplifiers with normal gain and high input impedance are
well suited for this microphone.
The KSM313 is quite natural sounding and does not require color-
ation at the preamp stage for optimal performance. Preamps that
provide simple, transparent gain usually provide the best results.
However, you may prefer a more colored sound, and we encourage
you to experiment to find the right combination that suits your taste.
When addressing the rear side of the KSM313 please remember to
invert the signal polarity.*
*Shure’s A15PRS accessory is an in-line, balanced, polarity reversing switch
capable of this operation and is available online at: store.shure.com
The KSM313 is a precision instrument designed for rugged use.
However, it should be treated carefully to ensure reliable results
during each session. To protect your microphone, keep a few
simple precautions in mind to ensure long term performance:
1. Store your microphone in its protective case when it is not in
use. Leaving the microphone lying around will expose the ribbon
element to dust and other airborne particles that can adhere to the
inner assembly and decrease performance. This advice applies to
all high quality studio microphones!
2. When setting up the KSM313, maintain a reasonable distance
from fluorescent lights, power transformers, and other strong
electromagnetic sources to avoid hum.
3. Use a secure mount and stand and a good quality balanced,
shielded XLR connecting cable. For additional mounting
accessories, visit our website:www.shure.com
4. Phantom power is not necessary and should not be supplied
when connecting or disconnecting the microphone. However,
properly supplied phantom power will not harm the microphone.
CARE AND HANDLING
PROXIMITY EFFECT
With directional microphones, bass response increases as the mic
is moved closer (within two feet) to the sound source.
This phenomenon, known as proximity effect, can be used to
create a warmer, more powerful sound. To prevent explosive low
frequency sound during close-up use, the KSM313 bass response
gradually rolls off. This provides greater control and helps the user
take advantage of proximity effect.
SPECIFICATIONS
Transducer Type Roswellite™ Ribbon
Frequency Response 30Hz – 15,000Hz
Polar Pattern Bidirectional
Output Impedance Transformer, balanced,
actual270Ω
Polarity Positive pressure on front side of
ribbon produces positive voltage
on pin 2 relative to pin 3, pin 1
ground
Sensitivity
(at 1 kHz, open circuit voltage)
-54.5 dBV/Pa (1.88 mV/Pa)
Dimensions & Weight Diameter: 4.31 cm (1.70 in)
Height: 13.5 cm (5.30in)
Weight: 400g (0.88 lbs)
Weight: 597g (1.13 lbs)
w/monocle mount
Max SPL 146 dB
Connector Three pin professional
audio (XLR) male
MONOCLE MOUNT FOR KSM313
KSM313 Frequency Response – Front
KSM313 Frequency Response – Rear
500 Hz
1000 Hz
4 kHz
8 kHz
2 kHz
KSM313 Polar Pattern
CERTIFICATION
ACCESSORIES AND PARTS
Furnished
Optional
Monocle Mount A313M
Shock Mount A313SM
Eligible to bear CE Marking. Conforms to European EMC Directive
2004/108/EC. Meets Harmonized Standards EN55103-1:1996
and EN55103-2:1996, for residential (E1) and light industrial (E2)
environments.
The Declaration of Conformity can be obtained from:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department EMEA Approval
Wannenacker Str. 28
D-74078 Heilbronn, Germany
Phone: +49 7131 72 14 0
Fax: +49 7131 72 14 14
Email: [email protected]
SERVICE
Trademark Notices: Roswellite is a trademark and the circular S
logo, the stylized Shure logo, and the word, “Shure” are registered
trademarks of Shure Incorporated in the United States. These
marks may be registered in other jurisdictions.
If you have any questions not answered in this booklet, please
contact Shure Applications Engineering at 847-600-8440, Monday
through Friday, from 8:00am to 4:30pm, CST. In Europe, call 49-
7131-72140. Our web address is www.shure.com.
TRADEMARKS
Altri manuali per ROSWELLITE KSM313
6
Indice
Altri manuali Shure Microfono
Shure
Shure MV88+ Manuale utente
Shure
Shure Beta 53 Manuale utente
Shure
Shure W15HT/87 Manuale utente
Shure
Shure 507B Manuale utente
Shure
Shure Microflex MX400SE Series Manuale utente
Shure
Shure 55SH Manuale utente
Shure
Shure WL183 Manuale utente
Shure
Shure MV88+ Manuale utente
Shure
Shure KSM9HS Manuale utente
Shure
Shure Microflex MX202B/C Manuale utente
Shure
Shure MXA910-60CM Manuale utente
Shure
Shure 527B Manuale utente
Shure
Shure Microflex MX391 Series Manuale utente
Shure
Shure UNIDYNE 580SA Manuale utente
Shure
Shure Microflex MX391 Series Manuale utente
Shure
Shure Microflex MXWAPT4 Manuale utente
Shure
Shure AXIENT DIGITAL ADX2FD Manuale utente
Shure
Shure SLX Wireless System Scheda tecnica
Shure
Shure KSM44 Manuale utente
Shure
Shure BETA57A Manuale utente
