Shure SM35 Manuale utente
SM35
Performance Headset Condenser Microphone
The Shure headworn electret condenser microphone, SM35, user guide.
Version: 2 (2019-L)
Shure Incorporated
3/6
1.
2.
3.
SM35
Performance Headset Condenser Microphone
SM35 Headworn Microphone
The Shure SM35 is a headworn electret condenser microphone, intended for use with a wireless bodypack transmitter in live
stage performances.
Wearing the Microphone
Install the windscreen on the microphone boom.
Place the headband around the back of the head, with the boom on the left side.
Place the microphone at the corner of the mouth. To decrease pops and plosives, avoid placing the microphone directly
in front of the mouth
Shure Incorporated
4/6
Note: Do not store the microphone in damp, enclosed spaces. Allow perspiration to dry completely before storing.
Certifications
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per
formance.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Specifications
Type
Electret Condenser
Frequency Response
40Hz to 20,000Hz
Polar Pattern
Unidirectional (Cardioid)
Output Impedance
100Ω, @ 1 kHz
Sensitivity
-57.8dBV/Pa, @ 1 kHz, 1000Ωload
Signal-To-Noise Ratio
59.2dB, @ 1 kHz, 1000Ωload
Maximum SPL
151.3dB, 1000Ωload, @ 1 kHz, 1% THD
[1]
[1]
Shure Incorporated
5/6
Dynamic Range
116.5dB, @ 1 kHz, 1000Ωload
Self Noise
34.8dBSPL-A, 1000Ωload
Power Requirements
TA4F +5VDC (nominal), 10V maximum (DC bias)
XLR connector 12 to 52VDC, phantom power
Polarity
TA4F Positivepressureondiaphragmproducesposi-
tive voltage on pin 3 with respect to pin 1
XLR Positivepressureondiaphragmproducesposi-
tive voltage on pin 2 with respect to pin 3
Cable
1.1m (45in.)
Connector
TA4F or XLR
Weight
72g (2.53oz.)
Measurements taken using RPM400 preamp
*All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly
decreased headroom and sensitivity.
[1]
[1]
[1]
Shure Incorporated
6/6
Indice
Altri manuali Shure Microfono
Shure
Shure MX183BP Manuale utente
Shure
Shure BG 1.0 Manuale utente
Shure
Shure MV5 Manuale utente
Shure
Shure Microflex MX395W/O Manuale utente
Shure
Shure SM87A Manuale utente
Shure
Shure MXA910-60CM Manuale utente
Shure
Shure VP89L Manuale utente
Shure
Shure BLX Series Manuale utente
Shure
Shure 440 Manuale utente
Shure
Shure SM57 Manuale utente
Shure
Shure SM35 Manuale utente
Shure
Shure SM58LC Manuale utente
Shure
Shure 550L Manuale utente
Shure
Shure MXA920 Istruzioni per il montaggio
Shure
Shure C Series Manuale utente
Shure
Shure Microflex MX405 Manuale utente
Shure
Shure microphone system Manuale utente
Shure
Shure 55SH Manuale utente
Shure
Shure EZB/C Manuale utente
Shure
Shure BETA 98/S Manuale utente
