Shure ADX5D Manuale utente

ADX5D

Portable Receiver

The Shure user guide for ADX5D.

Version: 2.1 (2023-C)

Shure Incorporated
2/49
Table of Contents
ADX5D   Portable Receiver 4
ADX5D Portable Slot-In Receiver 4
Features 4
Optional Accessories 4
Hardware Callouts 6
Hardware Setup 9
Antenna Attachment 10
Rear Panel Kits 11
Attaching the Backplate 11
TA3 Backplate 11
DB15 Backplate 14
DB25 Backplate 16
Scan for Available Frequencies 17
Group Scan 18
Channel Scan 18
Spectrum Scan 18
IR Sync 18
Home Screen 19
Icons 19
Menus and Configuration 20
Shortcut Menu 20
Device Configuration Menu 20
Channel Menu 24
ShowLink® Remote Control 27
ADX5D ShowLink® Modes 28
ShowLink® Test 30
Assigning Transmitters to Transmitter Slots 30
Party Dial 31
Custom Groups 32
Transmission Modes 32
Selecting a Transmission Mode 33
Frequency Diversity 33
FD-S Advanced Settings 33
Interference Management 34
Setting the Detection Mode 34
Unregistered Transmitter Action 34
Frequency Server 34
3.5 mm. Output Settings 35
Firmware 35
Firmware Versioning 35
Updating the Receiver Firmware 35
Updating the Transmitter Firmware 35
Troubleshooting 36
Notifications 37
Device Notifications 37
Channel Notifications 38
Contact Customer Support 39
Receiver Frequency Bands 39
Specifications 40
Dimensions 43
Pinout Diagrams 43
DB15 44
DB25 44
TA3M 45

Shure Incorporated

3/49

Hirose 45

IMPORTANT SAFETY INSTRUCTIONS 45

Certifications 46

Information to the user 48

Shure Incorporated

4/49

•

ADX5D 

Portable Receiver

ADX5D Portable Slot-In Receiver

The Axient Digital ADX5D is a portable, dual-channel, digital wireless receiver.

Features

Wide tuning range up to 184 MHz (varies by region)

High spectral efficiency due to advanced digital modulation scheme offers more wireless channels in available RF space

True digital diversity reception per channel for drop-out resistance and excellent range

Low latency, down to 2 milliseconds

Networked control with Wireless Workbench software and ShurePlus Channels

ShowLink direct mode allows remote control of Axient Digital transmitters without the need of additional equipment*

Aux 3.5mm audio output provides connection to headphones or to a balanced line level input

Three backplate connector options support various applications and connector types

* See Country-Specific Functionality Restrictions.

™

® ®

Shure Incorporated

5/49

Optional Accessories

①ADX5BP-TA3

Standalone backplate

②ADX5BP-DB15

DB15 backplate and spacer plate

③ADX5BP-DB25

DB25 backplate and spacer plate

④ADX5BS-L

L-type battery sled attachment

⑤ADX5BS-AA

AA battery sled attachment

⑥ADX5-MOUNT

Mounting plate with cold shoe

Shure Incorporated

6/49

⑦M3 screws (x2)

To attach cold shoe to mounting plate

⑧¼-20 screws (x2) and M2.5 screws (x2)

To attach mounting plate to third-party mounts

Shure Incorporated

7/49

Hardware Callouts

①SMA inputs from Antenna A and Antenna B

RF connection for Antenna A and Antenna B.

②Main mounting screws (M2.5x0.45)

Shure Incorporated

8/49

◦

Captive screws for mounting the receiver to other hardware.

③SMA input from ShowLink antenna

RF connection for networking via ShowLink.

Note: See Country-Specific Functionality Restrictions.

④"Exit" (X) button

Push to return to the previous menu screen, hold to power the unit on or off.

⑤"Enter" (O) button

Press to enter menu screens and confirm menu changes.

⑥Control buttons

Use to navigate through parameter menus and to change settings.

⑦Power LED

Green = Unit is powered on

Red = Unit is powered off

Off = Unit is not connected to a valid power supply

⑧Audio level LEDs

Red, yellow, and green LEDs indicate average and peak audio levels. For more specific readings, use the in-display audio

monitor.

⑨Antenna status LEDs

Indicates status for both antennas:

Blue = Normal RF signal between the receiver and transmitter

Red = Interference detected

Off = No RF connection between the receiver and transmitter

Note: The receiver will not output audio unless one blue LED is illuminated.

⑩Channel quality LEDs

Displays signal-to-noise ratio of RF signal. When the RF signal is strong with a low level of noise, all five LEDs are lit; low

levels of channel quality provide an early warning of potential problems, allowing you to switch to a clear frequency.

⑪IR Sync LED

Indicates the receiver's IR port is aligned with a transmitter.

⑫Infrared (IR) port

Align with a compatible transmitter's IR port during an IR Sync for automated tuning and setup.

⑬Ambient Light Sensor

Automatically detects external lighting conditions.

⑭Display

Shure Incorporated

9/49

View menu screens and settings. Press any control button to activate the display.

⑮USB-C port

Connect to a computer to update firmware.

Note: Device cannot be powered by USB.

⑯3.5mm output port

User-assignable audio output.

⑰Backplate screw holes

Internally-threaded screw holes for securing interchangeable backplates.

⑱Rear panel connector

Transfers data and power from compatible backplates.

Shure Incorporated

10/49

Hardware Setup

Antenna Attachment

Altri manuali per ADX5D

Indice

Altri manuali Shure Ricevitore

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente