SICK GRTB18V Manuale utente

OPERATING INSTRUCTION

GRTB18(S)V

Cylindrical photoelectric sensors

en, de, fr, pt, it, es, zh, ja, ru

OPERATING INSTRUCTIONS

GRTB18(S)V

Cylindrical photoelectric sensors

Described product

GR18 Inox

GRTB18(S)V

Manufacturer

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Germany

Production location

SICK, Malaysia

Legal information

This work is protected by copyright. Any rights derived from the copyright shall be

reserved for SICK AG. Reproduction of this document or parts of this document is only

permissible within the limits of the legal determination of Copyright Law. Any modifica‐

tion, abridgment or translation of this document is prohibited without the express writ‐

ten permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

Original document

This document is an original document of SICK AG.

2006/42/EC

SAFETY

8021184.16B5 | SICK

Subject to change without notice 3

Contents

1 Safety notes....................................................................................... 5

2 Intended use...................................................................................... 5

3 Operating and status indicators...................................................... 5

4 Mounting............................................................................................. 6

5 Electrical installation........................................................................ 7

6 Commissioning.................................................................................. 8

7 Troubleshooting................................................................................. 10

7.1 Troubleshooting table............................................................................... 11

8 Disassembly and disposal............................................................... 11

9 Maintenance...................................................................................... 11

10 Technical specifications................................................................... 13

CONTENTS

48021184.16B5 | SICK

Subject to change without notice

1 Safety notes

■Read the operating instructions before commissioning.

■

Connection, mounting, and setting may only be performed by skilled per‐

son.

■

2006/42/EC

SAFETY

Not a safety component in accordance with the EU Machinery Directive.

■

When commissioning, protect the device from moisture and contamination.

■These operating instructions contain information required during the life cycle of

the sensor.

2 Intended use

The GRTB18(S)V is an opto-electronic photoelectric proximity sensor (referred to as

“sensor” in the following) for the optical, non-contact detection of objects, animals, and

persons. If the product is used for any other purpose or modified in any way, any war‐

ranty claim against SICK AG shall become void.

3 Operating and status indicators

Photoelectric proximity sensor with background suppression.

Table 1: Dimensional drawings

M18x1

55.9 (2.2)

31.7 (1.25)

(0.16)

12.9

(0.51)

M18x1

0.6

(0.02)

25°

4.7 (0.19)

Figure 1: Short variant, con‐

necting cable

M12x1

55.9 (2.2)

31.7 (1.25)

(0.16)

12.9

(0.51)

M18x1

25°

4.7 (0.19)

0.6

(0.02)

Figure 2: Short variant, M12

male connector

27.8 (1.09)

(0.16)

55.9 (2.2)

31.7 (1.25)12.9

(0.51)

M18x1

0.6

(0.02)

25°

4.7 (0.19)

Figure 3: Short variant, poten‐

tiometer, connecting cable

12.9

(0.51)

(0.16)

55.9 (2.2)

31.7 (1.25)

27.8 (1.09)

M12x1

M18x1

0.6

(0.02)

25°

4.7 (0.19)

Figure 4: Short variant, poten‐

tiometer, M12 male connector

SAFETY NOTES 1

8021184.16B5 | SICK

Subject to change without notice 5

73.3 (2.89)

49.3 (1.94)

(0.16)

12.9

(0.51)

M18x1

25°

4.7 (0.19)

0.6

(0.02)

Figure 5: Long variant, connect‐

ing cable

73.4 (2.89)

49.3 (1.94)

M18x1

M12x1

(0.16)

12.9

(0.51)

M18x1

25°

4.7 (0.19)

0.6

(0.02)

Figure 6: Long variant, M12

male connector

73.3 (2.89)

49.3 (1.94)

45.3 (1.78)

(0.16)

12.9

(0.51)

M18x1

25°

4.7 (0.19)

0.6

(0.02)

Figure 7: Long variant, poten‐

tiometer, connecting cable

73.4 (2.89)

49.3 (1.94)

45.3 (1.78)

(0.16)

M18x1

1M12x1

12.9

(0.51)

M18x1

25°

4.7 (0.19)

0.6

(0.02)

Figure 8: Long variant, poten‐

tiometer, M12 male connector

1Connection

2Mounting bracket M18 x 1

3Fastening nuts (2 x); SW24, stainless steel

4Potentiometer, 270°

5LED indicator (4 x)

6Optical axis, receiver

7Optical axis, sender

8Standard direction

+–

Figure 9: Operating element: Sensing range

4 Mounting

Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐

sories).

3 OPERATING AND STATUS INDICATORS

68021184.16B5 | SICK

Subject to change without notice

max. 90 Nm

Note the sensor’s maximum permissible tightening torque of 90 Nm.

Note the preferred direction of the object relative to the sensor, cf. table 1.

5 Electrical installation

The sensors must be connected in a voltage-free state (UV = 0 V). The following informa‐

tion must be observed, depending on the connection type:

– Male connector connection: pin assignment

– Cable: wire color

Only apply voltage/switch on the voltage supply (UV > 0 V) once all electrical connec‐

tions have been established. The green LED indicator lights up on the sensor.

Explanations of the connection diagram (Tables 2 and 3):

Q / Q = switching outputs

n. c. = not connected

DC: 10... 30 V DC, see "Technical specifications", page 13

Table 2: DC

GRTB18(S)V x11xxx x13xxx x24xxx x23xxx

1+ (L+) + (L+) + (L+) + (L+)

2Qn. c. Qn. c.

3- (M) - (M) - (M) - (M)

4QQQQ

1= brn

2 = wht

3 = blu

4 = blk

0.14 mm2

AWG26

1 = brn

3 = blu

4 = blk

0.14 mm2

AWG26

4 3

ELECTRICAL INSTALLATION 5

8021184.16B5 | SICK

Subject to change without notice 7

Table 3: DC

PNP: Q (≤ 100 mA)

+ (L+)

– (M)

+ (L+)

– (M)

NPN: Q (≤ 100 mA)

+ (L+)

– (M)

+ (L+)

– (M)

PNP: Q (≤ 100 mA)

+ (L+)

– (M)

+ (L+)

– (M)

NPN: Q (≤ 100 mA)

+ (L+)

– (M)

+ (L+)

– (M)

6 Commissioning

1Alignment

Align the sensor with the object. Select the position so that the red emitted light beam hits

the center of the object. You must ensure that the optical opening (front screen) of the sen‐

sor is completely clear [see figure].

Figure: Alignment

Figure: Alignment 2

2Sensing range

6 COMMISSIONING

88021184.16B5 | SICK

Subject to change without notice

Check the application conditions: Adjust the sensing range and distance to the object or

background and the remission capability of the object according to the corresponding dia‐

gram [see figure 10] (x = sensing range, y = monitored area between the set sensing range

and background suppression as a % of the sensing range (object remission/background

remission)). Remission: 6% = black 1, 18% = gray 2, 90% = white 3 (referring to stan‐

dard white as per DIN 5033). We recommend making the adjustments using an object with

a low remission.

The minimum distance (= y) for background suppression can be determined from diagram

[ see figure 10 1] as follows:

Example: x = 150 mm, y = 20 => 20% of 150 mm = 30 mm. That is, the background is

suppressed at a distance of > 180 mm from the sensor.

6%/90%

18%/90%

90%/90%

Example:

Sensing range on black, 6%

x = 100 mm, y = (10% of 100 mm) =10 mm

100

(13.94)

(1.97) 150

(5.91) 250

(9.84)

200

(7.87) 300

(11.81)

Minimum distance between set sensing range and

background (white, 90%) in % of sensing range

1 Sensing range on black, 6 % remission

2 Sensing range on gray, 18 % remission

3 Sensing range on white, 90 % remission

Distance in mm (inch)

white background (90%)

Figure 10: Sensing range of up to 300 mm

Use figure 12 and Table 3 to check the function. If the switching output fails to behave in

accordance with Table 3, check the application conditions. See section Fault diagnosis.

Figure 11: Description of the

3Sensing range setting

Sensor which it is not possible to set: The sensor is adjusted and ready for operation.

COMMISSIONING 6

8021184.16B5 | SICK

Subject to change without notice 9

The sensing range is adjusted with the potentiometer (type: 270°). Clockwise rotation:

sensing range increased; counterclockwise rotation: sensing range reduced. We recom‐

mend placing the object within the sensing range, e.g. see table 4. Once the sensing range

has been adjusted, the object is removed from the path of the beam, which causes the

background to be suppressed and the switching output to change [see table 3].

Table 4: Sensing range setting

The sensor is adjusted and ready for operation.

Figure 12: Detection

7 Troubleshooting

The Troubleshooting table indicates measures to be taken if the sensor stops working.

7 TROUBLESHOOTING

10 8021184.16B5 | SICK

Subject to change without notice

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali SICK Accessori

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente