SICK WT24-2 Series Manuale utente

OPERATING INSTRUCTIONS

WT24-2

Compact photoelectric sensors

en, de, fr, pt, it, es, zh, ja, ru

OPERATING INSTRUCTIONS

WT24-2

Compact photoelectric sensors

en, de, fr, pt, it, es, zh, ja, ru

Described product

W24-2

WT24-2

Manufacturer

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Germany

Legal information

This work is protected by copyright. Any rights derived from the copyright shall be

reserved for SICK AG. Reproduction of this document or parts of this document is only

permissible within the limits of the legal determination of Copyright Law. Any modifica‐

tion, abridgment or translation of this document is prohibited without the express writ‐

ten permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

Original document

This document is an original document of SICK AG.

2006/42/EC

SAFETY

8008784.14BT | SICK

Subject to change without notice 3

Contents

1 General safety notes......................................................................... 5

1.1 Safety notes.............................................................................................. 5

2 Notes on UL approval........................................................................ 5

3 Correct use......................................................................................... 5

4 Operating elements and status indicators.................................... 5

5 Mounting............................................................................................. 6

6 Electrical installation........................................................................ 6

6.1 WT24-2Bxxx, WT24-2Vxxx........................................................................ 7

6.2 WT24-2Rxxx.............................................................................................. 8

7 Additional functions.......................................................................... 9

8 Commissioning.................................................................................. 10

9 Devices with special features.......................................................... 12

10 Troubleshooting................................................................................. 13

11 Disassembly and disposal............................................................... 14

12 Maintenance...................................................................................... 14

13 Technical data.................................................................................... 14

13.1 Dimensional drawing................................................................................ 16

CONTENTS

48008784.14BT | SICK

Subject to change without notice

1 General safety notes

1.1 Safety notes

■Read the operating instructions before commissioning.

■

Connection, mounting, and setting may only be performed by skilled per‐

son.

■

2006/42/EC

SAFETY

Not a safety component in accordance with the EU Machinery Directive.

■

When commissioning, protect the device from moisture and contamination.

■These operating instructions contain information required during the life cycle of

the sensor.

2 Notes on UL approval

The device must be supplied by a Class 2 source of supply.

UL Environmental Rating: Enclosure type 1

3 Correct use

The WT24-2 is an opto-electronic photoelectric proximity sensor (referred to as "sensor"

in the following) for the optical, non-contact detection of objects, animals, and persons.

If the product is used for any other purpose or modified in any way, any warranty claim

against SICK AG shall become void.

4 Operating elements and status indicators

Photoelectric proximity sensor with background suppression.

Table 1: Display and operating elements

WT24-2Bx2x, -2Vx2x, -2Bx5x,

-2Vx5x

t1+ t2

PNP

NPN

1.0

1Yellow LED indicator

WT24-2Bx1x, -2Vx1x, -2Bx4x,

-2Vx4x

PNP

NPN

1.0

1Yellow LED indicator

WT24-2Rx2x, -2Rx5x

t1+ t2

1.0

1Yellow LED indicator

2Potentiometer: adjust‐

ment of sensing range

WT24-2Rx1x, -2Rx4x

1.0

1Yellow LED indicator

2Potentiometer: adjust‐

ment of sensing range

GENERAL SAFETY NOTES 1

8008784.14BT | SICK

Subject to change without notice 5

2Potentiometer: adjust‐

ment of sensing range

3Switch: light (L) / dark

(D)

4Switch: NPN/PNP

5Potentiometer: adjust‐

ment of time delay t2

6Potentiometer: adjust‐

ment of time delay t1

7Potentiometer: adjust‐

ment of time stage

2Potentiometer: adjust‐

ment of sensing range

3Switch: light (L) / dark

(D)

4Switch: NPN/PNP

3Switch: light (L) / dark

(D)

4Potentiometer: adjust‐

ment of time delay t2

5Potentiometer: adjust‐

ment of time delay t1

6Potentiometer: adjust‐

ment of time stage

3Switch: light (L) / dark

(D)

5 Mounting

Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐

sories).

Note the sensor’s maximum permissible tightening torque of 2 Nm.

Note the preferred direction of the object relative to the sensor, cf. see "Dimensional

drawing", page 16.

6 Electrical installation

The sensors must be connected in a voltage-free state. The following information must

be observed, depending on the connection type:

– Plug connection: note pin assignment: when the lid is open, the male connector

can be swiveled horizontally and vertically.

– Terminal connection: Note the permissible cable diameter of 5 to 10 mm. When

the lid is open, the M16 connector can be swiveled horizontally and vertically.

Unscrew the M16 connector and remove sealing plug. Lead voltage-free supply

cable through and connect sensor in accordance with table 2 and table 4.

Retighten M16 connector with seal so that the IP enclosure rating of the device is

ensured.

Figure 1: Opening the sensor Figure 2: Electrical connection

Only apply voltage/switch on the power supply once all electrical connections have

been established.

Explanation of the connection diagram (Tables 2-7) which are divided up into DC and

AC/DC devices:

Alarm = alarm output (see table 2 and Additional functions)

n. c. = not connected

5 MOUNTING

68008784.14BT | SICK

Subject to change without notice

NC = normally closed

NO = normally open

Q / Q = switching outputs

TE/Test = test input (see table 2 and table 7)

6.1 WT24-2Bxxx, WT24-2Vxxx

UB: 10 . 30 V DC, see "Technical data", page 14

Table 2: DC

WT24-2 B3x3 B2x0 V2x0 B4x0 V5x0 V510S15 B410S25

1+ (L+) + (L+) + (L+) + (L+) + (L+) + (L+) + (L+)

2- (M) - (M) - (M) Test Test Alarm n. c.

3Q/Q- Alarm - (M) - (M) - (M) - (M)

4-Q/QQ/QQ/QQ/QQ/QQ/Q

5- Test Test - Alarm Test -

IN = 4 A

1 2 3 4 5

0.14 ...

1.5 mm2

IN = 4 A

1 2 3 4 5

0.14 ...

1.5 mm2

IN = 4 A

4 3

ELECTRICAL INSTALLATION 6

8008784.14BT | SICK

Subject to change without notice 7

Table 3: DC

NPN

PNP

H, PNP: Q/Q (≤ 100 mA)

+ (L+)

Q/Q

– (M)

+ (L+)

Q/Q

– (M)

D, PNP: Q/Q (≤ 100 mA)

+ (L+)

Q/Q

– (M)

+ (L+)

Q/Q

– (M)

H, NPN: Q/Q (≤ 100 mA)

+ (L+)

Q/Q

– (M)

+ (L+)

Q/Q

– (M)

D, NPN: Q/Q (≤ 100 mA)

+ (L+)

Q/Q

– (M)

+ (L+)

Q/Q

– (M)

6.2 WT24-2Rxxx

UB 20 V ... 250 V AC/DC, see "Technical data", page 14

Table 4: AC/DC

WT24-R2x0 WT24-2R5x8 WT24-2R5x9

1L1 / + N / - N / -

2N / - NC NC

3Relay n. c. n. c.

4Relay NO NO

5Relay L1 / + L1 / +

1 2 3 4 5

0.14 ... 1.5 mm2

IN = 4 A

6 ELECTRICAL INSTALLATION

88008784.14BT | SICK

Subject to change without notice

Table 5: AC/DC relay

Relay

3WT24-2R2x0

Imax. = 4A @ 250V AC

4A @ 24V DC

0.125A @ 250 V DC

UL: 4A @ 250 V AC, general

use

4A @ 250 V AC, resistive

(NO)

3A @ 250 V AC, resistive

(NC)

4A @ 24 V DC, NO, general

use

3A @ 24 V DC, NC, general

use

R300

B300 (NO contacts only)

WT24-2R5x8, WT24-2R5x9: Imax. = 2.5A @ 250 V AC, 2.5A @ 24 V DC, 0.125A @ 250 V

7 Additional functions

Alarm

Alarm output: the sensor (WT24-2Vxxx) features a pre-failure notification output

(“Alarm” in connection diagram [see "WT24-2Bxxx, WT24-2Vxxx", page 7]), which issues

a notification if the sensor is only ready for operation to a limited extent. The LED indi‐

cator flashes in this case. Possible causes: sensor is contaminated, sensor is out of

alignment. In the good state: LOW (0), if excessively contaminated HIGH (1).

Table 6: Alarm

Alarm (≤ 100 mA)

+ (L+)

Alarm

– (M)

+ (L+)

Alarm

– (M)

ADDITIONAL FUNCTIONS 7

8008784.14BT | SICK

Subject to change without notice 9

Test input

Test input: the WT24-2B / -V sensors feature a test input (“TI” or “Test” on the connec‐

tion diagram [see "WT24-2Bxxx, WT24-2Vxxx", page 7 and see table 7]), which can be

used to switch the sender off and, therefore, check that the sensor is functioning cor‐

rectly: if female cable connectors with LED indicators are used, you have to ensure that

the TI is assigned accordingly.

If an object is detected, activate the test input (see the connection diagram [see

"WT24-2Bxxx, WT24-2Vxxx", page 7 and see table 7], PNP: TE → M). The send LED is

shut down or no object being detected is simulated. Use the following table to check the

function. If the switching output fails to behave in accordance with the following table,

check the application conditions. See section Fault diagnosis.

Table 7: Test

Test

+ (L+)

Test

– (M)

+ (L+)

Test

– (M)

8 Commissioning

1Alignment

WT24-2Xx4x, -2Xx5x: align sensor on object. Select the position so that the red emitted

light beam hits the center of the object. You must ensure that the optical opening (front

screen) of the sensor is completely clear [see figure 3 and figure 4].

WT24-2Xx1x, -2Xx2x: align sensor on object. Select the position so that the infrared light

(not visible) hits the center of the object. The correct alignment can only be detected via

the LED indicators. See figure 3 and figure 4. You must ensure that the optical opening

(front screen) of the sensor is completely clear.

Figure 3: Alignment Figure 4: Alignment 2

2Sensing range

7 ADDITIONAL FUNCTIONS

10 8008784.14BT | SICK

Subject to change without notice

Altri manuali per WT24-2 Series

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente