Sidewinder SuperPivot Manuale utente

OPERATOR’S

MANUAL

SuperPivot

TABLE OF CONTENTS

OWNER ASSISTANCE 3................................................................

WARRANTY AND LIMITATION OF LIABILITY 5...........................................

BLADE INFORMATION 9................................................................

BED OPENER BLADE 9..............................................................

TRENCHING BLADE 9...............................................................

GROOMING BLADE 9................................................................

SAFETY INFORMATION 10..............................................................

PERSONAL SAFETY 10..............................................................

MACHINE SAFETY 10................................................................

PERSONAL SAFETY DECALS 12........................................................

SAFETY DECAL INFORMATION 13......................................................

SERIAL NUMBER LOCATIONS 14.......................................................

SIDEWINDER

™

- SUPER PIVOT SERIAL NUMBER LOCATION 14........................

ENGINE SERIAL NUMBER LOCATION 14..............................................

CONTROL LOCATIONS - OVERVIEW 15.................................................

DAILY CHECKS TO PERFORM BEFORE STATING THE ENGINE 16.........................

CHECK ENGINE OIL LEVEL 16.......................................................

CHECK FUEL LEVEL 16..............................................................

CHECK THAT ALL SHIELDS ARE INSTALLED AND ATTACHING

HARDWARE IS TIGHT 16.............................................................

CHECK THE BLADE AND ATTACHING HARDWARE 17.................................

CHECK TIRE PRESSURES 17........................................................

ENGINE OPERATION 18................................................................

STARTING A COLD ENGINE 18.......................................................

STARTING A WARM ENGINE 19......................................................

STOPPING THE ENGINE 20..........................................................

PARKING THE MACHINE 22............................................................

OPERATING THE TOW VALVE 23........................................................

TOW VALVE ON 23..................................................................

TOW VALVE OFF 23.................................................................

OPERATING THE DIRECTIONAL CONTROLS 24..........................................

STOPPING MOVEMENT WITH ENGINE RUNNING 24...................................

PRELIMINARY STEPS TO MOVING THE MACHINE IN ANY

DIRECTION WITH ENGINE ON 24.....................................................

VARIABLE SPEED CONTROL ADJUSTMENT 26........................................

ADJUSTING THE VARIABLE SPEED CONTROL 26.....................................

FORWARD DIRECTION 27............................................................

REVERSE DIRECTION 27............................................................

BLADE AND SHIELD COMBINATIONS FOR USE WITH THE

SIDEWINDER

™

- SUPER PIVOT 28......................................................

BED OPENER AND TRENCHING BLADE SHIELD 28....................................

GROOMING BLADE SHIELD 28.......................................................

MAIN DRIVE BELT ROUTING FOR SPECIFIC APPLICATIONS 29..........................

TENSION HANDLE LOCATION 29.....................................................

BED OPENING OR TRENCHING POSITION 29........................................

GROOMING POSITION 29...........................................................

GROOMING - MAIN DRIVE BELT ROUTING 30........................................

BED OPENING AND TRENCHING - MAIN DRIVE BELT ROUTING 31....................

POSITIONING THE ADJUSTABLE ANGLE

SIDEWINDER

™

- SUPER PIVOT ATTACHMENT ARM 33...................................

ATTACHMENT ARM POSITION WHEN TRANSPORTING THE

SIDEWINDER

™

- SUPER PIVOT WITH THE ATTACHMENT ARM RAISED 33..............

ATTACHMENT ARM POSITION FOR BED OPENER OR TRENCHING

BLADE USE 33......................................................................

ATTACHMENT ARM POSITION FOR GROOMING BLADE USE 34........................

SIDEWINDER

™

- SUPER PIVOT SWING CONTROL LEVER 34...........................

ADJUSTING SIDEWINDER

™

- SUPER PIVOT ATTACHMENT ARM POSITION 34...........

OPERATING THE ATTACHMENT 37.....................................................

STARTING THE ATTACHMENT 37.....................................................

STOPPING THE ATTACHMENT 38.....................................................

ADJUSTING THE DEPTH CONTROL WHEEL 39..........................................

ADJUSTMENT PROCEDURE 39.......................................................

CHANGING ATTACHMENT BLADE 40....................................................

BLADE REMOVAL 40................................................................

INSTALLING THE BLADE 42..........................................................

SECURING THE MACHINE FOR TRANSPORT 44.........................................

ENGINE MAINTENANCE SEE ENGINE MANUFACTURES OWNER’S MANUAL...............

LUBRICATION 46......................................................................

SIDEWINDER

™

- SUPER PIVOT BELT TENSION AND ADJUSTMENT 48....................

MAIN DRIVE BELT 48................................................................

CHECKING BELT TENSION 48.......................................................

ADJUSTING BELT TENSION 48......................................................

ATTACHMENT DRIVE BELT 48........................................................

CHECKING BELT TENSION 48.......................................................

ADJUSTING BELT TENSION 49......................................................

END OF SEASON STORAGE SERVICE 51................................................

SPECIFICATIONS 52...................................................................

Thank you and congratulations on your purchase of a new Turf Teq Sidewindert- Super

Pivot!

We are confident that your Sidewindert- Super Pivot will be one of the most gratifying

pieces of equipment you will ever own. As a result of your investment in the Sidewindert

- Super Pivot, you will eliminate the need for back--breaking work done with shovels and

you will see an incredible increase in productivity.

Your happiness is our goal, so please let us know of any questions or issues you may

have so that we may answer them or address them as quickly as possible. (Please have

your serial number available when you call us). We would also like to hear from you on

how much you enjoy your new Sidewindert- Super Pivot!

Turf Teq, LLC Toll Free (866) 503-TURF

Total Customer Satisfaction is our Goal

The Sidewindert- Super Pivot is designed to provide trouble-free operation. To ensure

that you are satisfied with your Sidewindert- Super Pivot, we offer the following Guaran-

tee of Satisfaction:

•The Sidewindert- Super Pivot is GUARANTEED TO THE ORIGINAL PURCHASER

FOR ONE FULL YEAR against defects in materials and workmanship. If you feel that a

part is defective, contact us and we replace the defective part and provide repair in-

structions as required..

•The engine is guaranteed by the engine manufacturer:

Honda Engine: Two years in consumer use; two years in commercial use

•If your have questions or are not 100% satisfied with your Sidewindert- Super Pivot

within the first 30 days of use, call us toll free at 1-866-503-TURF and we will work to

answer your questions and to resolve your concerns.

Please have the following information from your packing slip and from the Sidewindert-

Super Pivot available when contacting our customer service department:

Name of Purchaser

Model

Serial Number

Date Purchased

Sales Order Number

Turf Teq, LLC

WARRANTY AND LIMITATION OF LIABILITY

(Customer Copy -- Page 1)

COVERAGE PROVIDED

Turf Teq, LLC, hereinafter called “Turf Teq” warrants to the original retail purchaser of each new Product Turf

Teq will replace any part thereof found to be defective in materials or workmanship within the time periods

identified below.

DEFINITION

“Products” are machines, attachments, and Replacement Parts therefore supplied by Turf Teq.

WARRANTY PERIOD

12 months from the date of first retail purchase.

Replacement Parts are warranted for 60 days or to the end of the Warranty Period, whichever is longer.

LIMITATIONS, INCLUDING DISCLAIMER OF IMPLIED WARRANTIES AND CONSEQUENTIAL DAM-

AGES

This warranty gives you specific legal rights and you may also have other rights that vary depending on

state or provincial laws.

Turf Teq does not authorize any person or Dealer to create for it any other obligation or liability in connection

with these Products. TO THE EXTENT ALLOWED BY LAW, ANY IMPLIED WARRANTY OF MERCHANT-

ABILITY OR FITNESS APPLICABLE TO THIS PRODUCT IS LIMITED TO THE STATED DURATION OF

THIS WRITTEN WARRANTY. TURF TEQ IS NOT LIABLE FOR LOSS OF THE USE OF THE PRODUCT,

LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR CONSEQUENTIAL DAMAGES.

Some states and provinces do not allow limitations on how long an implied warranty will last or the exclusion

or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to

you.

The remedy of repair or replacement of a defective part during the warranty period herein specified shall be

the purchaser’s exclusive remedy.

RIGHT TO MAKE DESIGN CHANGES

Turf Teq reserves the right to make changes in the design and other changes in its Products at any time and

from time to time without notice and without incurring any obligation with respect to any product previously

ordered from it, sold or shipped by it.

Turf Teq, LLC

WARRANTY AND LIMITATION OF LIABILITY

(Customer Copy -- Page 2)

The warranty period will begin on the date of first retail sale.

The obligation of Turf Teq to purchase under this warranty is limited to the repair or replacement of

defective parts free of charge using genuine Turf Teq Replacement Parts. Repair or replacement in

accordance with this warranty shall constitute fulfillment of all liabilities of Turf Teq in respect to such

Products.

Turf Teq shall review these warranty provisions with the purchaser prior to retail sale, secure his ac-

knowledgement of delivery of this warranty and record the date of first retail sale.

WHAT IS NOT COVERED BY THE WARRANTY?

This warranty shall NOT apply under the following conditions:

1. With respect to vendor warranty items such as engines, which shall be warranted by their manufac-

turer, or local representative

a. Honda Engines have a 2 YEAR WARRANTY that is covered by American Honda Motor

Corporation.

2. If the Product has been subject to misapplication, abuse, misuse, improper maintenance or other

negligence, fire or other accident.

3. If parts or attachments other than those made or marketed by Turf Teq have been used in connec-

tion with the Product, and in the sole judgment of Turf Teq such use affects its performance, stability

or reliability.

4. If the Product has been altered or repaired in a manner which, in the sole judgment of Turf Teq, af-

fects its performance, stability or reliability.

5. Turf Teq shall have no liability for used equipment sold beyond the specified coverage period.

6. No warranty shall apply to damage resulting from accident or damage caused by environment (such

as exposure to corrosive material). Turf Teq shall not be responsible for any costs relating to rental

equipment used to replace the Product being repaired.

7. The warranty shall NOT apply to normal maintenance services, to normal replacement of service

items, or to normal deterioration due to use or exposure. Turf Teq shall not be responsible for nor-

mal replacement parts such as belts, chains, clutches, filters, oil, or other parts that are worn out,

unless they are determined by Turf Teq to be defective in material or workmanship.

Customer Signature _______________________

Date of Purchase _______________________

Date of Signature _______________________

Model Number _______________________

Serial Number _______________________

Turf Teq, LLC

WARRANTY AND LIMITATION OF LIABILITY

(Turf Teq Warranty Registration Copy -- Page 1)

Important: This copy must be completed, signed and returned to Turf Teq to register

the product and activate the warranty.

COVERAGE PROVIDED

Turf Teq, LLC, hereinafter called “Turf Teq” warrants to the original retail purchaser of each new Product Turf

Teq will replace any part thereof found to be defective in materials or workmanship within the time periods

identified below.

DEFINITION

“Products” are machines, attachments, and Replacement Parts therefore supplied by Turf Teq.

WARRANTY PERIOD

12 months from the date of first retail purchase.

Replacement Parts are warranted for 60 days or to the end of the Warranty Period, whichever is longer.

LIMITATIONS, INCLUDING DISCLAIMER OF IMPLIED WARRANTIES AND CONSEQUENTIAL DAM-

AGES

This warranty gives you specific legal rights and you may also have other rights that vary depending on

state or provincial laws.

Turf Teq does not authorize any person or Dealer to create for it any other obligation or liability in connection

with these Products. TO THE EXTENT ALLOWED BY LAW, ANY IMPLIED WARRANTY OF MERCHANT-

ABILITY OR FITNESS APPLICABLE TO THIS PRODUCT IS LIMITED TO THE STATED DURATION OF

THIS WRITTEN WARRANTY. TURF TEQ IS NOT LIABLE FOR LOSS OF THE USE OF THE PRODUCT,

LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR CONSEQUENTIAL DAMAGES.

Some states and provinces do not allow limitations on how long an implied warranty will last or the exclusion

or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to

you.

The remedy of repair or replacement of a defective part during the warranty period herein specified shall be

the purchaser’s exclusive remedy.

RIGHT TO MAKE DESIGN CHANGES

Turf Teq reserves the right to make changes in the design and other changes in its Products at any time and

from time to time without notice and without incurring any obligation with respect to any product previously

ordered from it, sold or shipped by it.

Turf Teq, LLC

WARRANTY AND LIMITATION OF LIABILITY

(Turf Teq Warranty Registration Copy -- Page 2)

The warranty period will begin on the date of first retail sale.

The obligation of Turf Teq to purchase under this warranty is limited to the repair or replacement of

defective parts free of charge using genuine Turf Teq Replacement Parts. Repair or replacement in

accordance with this warranty shall constitute fulfillment of all liabilities of Turf Teq in respect to such

Products.

Turf Teq shall review these warranty provisions with the purchaser prior to retail sale, secure his ac-

knowledgement of delivery of this warranty and record the date of first retail sale.

WHAT IS NOT COVERED BY THE WARRANTY?

This warranty shall NOT apply under the following conditions:

1. With respect to vendor warranty items such as engines, which shall be warranted by their manufac-

turer, or local representative

a. Honda Engines have a 2 YEAR WARRANTY that is covered by American Honda Motor

Corporation.

2. If the Product has been subject to misapplication, abuse, misuse, improper maintenance or other

negligence, fire or other accident.

3. If parts or attachments other than those made or marketed by Turf Teq have been used in connec-

tion with the Product, and in the sole judgment of Turf Teq such use affects its performance, stability

or reliability.

4. If the Product has been altered or repaired in a manner which, in the sole judgment of Turf Teq, af-

fects its performance, stability or reliability.

5. Turf Teq shall have no liability for used equipment sold beyond the specified coverage period.

6. No warranty shall apply to damage resulting from accident or damage caused by environment (such

as exposure to corrosive material). Turf Teq shall not be responsible for any costs relating to rental

equipment used to replace the Product being repaired.

7. The warranty shall NOT apply to normal maintenance services, to normal replacement of service

items, or to normal deterioration due to use or exposure. Turf Teq shall not be responsible for nor-

mal replacement parts such as belts, chains, clutches, filters, oil, or other parts that are worn out,

unless they are determined by Turf Teq to be defective in material or workmanship.

Customer Signature _______________________

Date of Purchase _______________________

Date of Signature _______________________

Model Number _______________________

Serial Number _______________________

Important: This copy must be completed, signed and returned to Turf Teq within 30

days of purchase to register the product and activate the warranty.

RETURN TO: Turf Teq, LLC

P.O. Box 127

New Holland, PA 17557

Indice

Manuali Taglia erba popolari di altre marche

RHINO

RHINO 1958 Manuale utente

Wolf Garten

Wolf Garten Compact plus 40 B Manuale utente

Cub Cadet

Cub Cadet LTX 1045 Manuale utente

Craftsman

Craftsman 917.378461 Manuale utente

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuale utente

Challenge

Challenge CH18V2 Istruzioni operative

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuale utente

DEWEZE

DEWEZE ATM-725 Manuale operativo

Weed Eater

Weed Eater 180083 Manuale utente

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuale utente

Better Outdoor Products

Better Outdoor Products Quick Series Manuale utente

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuale operativo

MTD

MTD 795, 792, 791, 790 Manuale utente

Toro

Toro Groundsmaster 3505-D Manuale utente

Dennis

Dennis FT 610 Manuale utente

AIRFORCE

AIRFORCE F-15 Gen 3 Manuale utente

MTD

MTD 126-220-000 Manuale utente

Toro

Toro 74806 Manuale utente