Siding Tools Industries UBENCH-B Manuale utente
1
Table Universelle
MANUEL D’UTILISATION
Universal bench
OWNER’S MANUAL
AVERTISSEMENT
Lire et comprendre toutes les directives. Le non-respect
des directives décrites ci-dessous peut causer des
blessures graves.
VEUILLEZ CONSERVER CES DIRECTIVES POUR
RÉFÉRENCE ULTÉRIEURE.
WARNING
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious bodily injury.
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
UBENCH
2
WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY! USING
THIS MACHINE WITH RESPECT AND CAUTION WILL CONSIDERABLY LESSEN THE
POSSIBILITY OF PERSONAL INJURY.
SAFETY RULES FOR THE UNIVERSAL BENCH.
1. READ AND UNDERSTAND THIS INSTRUCTION MANUALBEFORE OPERATING
THE UNIVERSAL BENCH.
2. The Universal Bench comes with a 1 year warranty from the date of
purchase on parts only (labor excluded). To activate your warranty, we
invite you to register on our website in the service tab at :
www.sidingtoolsindustries.com
3.
If you are not thoroughly familiar with the operation of the Universal Bench,
obtain advice from a qualified worker or call 450-849-7840 or toll free
1-844-449-7840
4.
Stay alert. Do not operate while under the influence of drugs, alcohol, or
medication.
5.
Always wear safety approved eye protection with side shields (ANSI Z87.1)
6.
Keep work area and free of debris.
7.
Keep children and unauthorized persons away from the Universal Bench and
workarea.
8.
Make sure the Universal Bench and the other tools are secured. Operate
only on a firm substrate or solid stand.
9.
Always install the extension feet when using the Universal Bench
extensions.
10.
Always install the UniversalKut 12 drawer feet when cutting with the
UniversalKut12
11.
Always keep hands away from blade while operating or carrying.
12. Do not alter or misuse this tool. The Universal Bench is precision built;
modifications not specified in this manual may result in a dangerous
condition.
13.
Maintain the Universal Bench with care. Keep mechanism clean and in order.
14.
Use only recommended accessories. The use of improper accessories may
cause hazards or injury.
15.
Never leave the Universal Bench in inclement weather.
16. The Universal Bench have a capacity of 500 lbs (225 Kg). Do not exceed
this capacity.
17. The extensions have a capacity of 50 lbs (22.5 Kg). Do not exceed this
capacity. Always align the mass directly over the extension feet.
18.
Before using any tools associated or not to the Universal Bench, make sure
to read the owner’s manual and respect all safety rules.
3
Preparation of the Universal Bench
1. Put the bench on the side.
Warning:
•Keep your hand out of reach of
pinch point.
•150 lbs (68kg) assembly.
•Use team lifting
2. Open the 2 sets of legs assembly.
2.1. To do so, loosen the handle
on the internal side of the legs
assembly.
2.2. Fully close the adjustable leg.
2.3. Repeat step 2.1. for the
second legs assembly.
Warning:
•Keep your hand out of reach of
pinch point.
3. Be sure to put the legs braces in
lock position (4x).
Warning:
•Keep your hand out of reach of
pinch point.
UBENCH SETUP
4
4. Adjust the bench height according
to the next specifications
(Dimensions may vary according
to the ground flatness):
4.1. ProKut 6 :
•A : Fully open
•Height : 33,25 in (845 mm)
4.2. UniversalKut 12 :
•A : Fully close
•Height : 21.50 in (546 mm)
Warning:
•Keep your hand out of reach of
pinch point.
•Be sure to firmly tight all 4 legs
assembly handles before the
next step.
5. Pull on the bench to put it on his
foots.
Warning:
•Keep your hand out of reach of
pinch point.
•150 lbs (68kg) assembly.
•Use team lifting
To store the bench, remove all tools
and equipment on the bench or
attached to it and repeat the previous
5 steps backward.
UBENCH SETUP
A
5
Installation of the ProKut 6 on the
Universal Bench
1. Put the ProKut 6 on the drawer
provided for that purpose.
2. Align the shelf holes with the
ProKut 6 foots holes (4x).
3. Attach the ProKut 6 to the drawer
with the hardware provided for that
purpose.
Warning:
•Torque : 55 in-lbs
•Keep your hand out of reach of
pinch point.
•Do not put your fingers against
the sharp edge of the blade at
any time.
4. Insert the drawer assembly on the
track.
4.1. The drawer got 8 heights
positions and 3 depths
positions.
5. Validate the height and the depth
of the ProKut 6 with a siding slide
test.
6. Lock the drawer assembly in place
with both quick pin
Warning:
•Keep your hand out of reach of
pinch point.
•Do not put your fingers against
the sharp edge of the blade at
any time.
PROKUT 6 SETUP
6
Installation of the UniversalKut 12
on the Universal Bench
1. Prepare the UniversalKut 12
1.1. Remove the 2 rear feet
bumpers
1.2. Remove the original front feet
assembly
•A 9/16¨ wrench and a 5/16¨
Allen key is required.
1.3. Prepare the UniversalKut 12
drawer.
•The UniversalKut 12 front
foot is already installed on
the drawer.
2. Put the UniversalKut 12 on the
drawer provided for that purpose.
Warning:
•Keep your hand out of reach of
pinch point.
•Do not put your fingers against
the sharp edge of the blade at
any time.
UKUT 12 SETUP
1.1
1.2
1.3
7
3. Attach the UniversalKut 12 to the
front feet of the drawer with the
original UniversalKut 12 hardware
provided for that purpose.
•A 9/16¨ wrench and a 5/16¨
Allen key is required.
Warning:
•Torque : 43 ft-lbs (516 in-lbs)
•Keep your hand out of reach of
pinch point.
•Do not put your fingers against
the sharp edge of the blade at
any time.
4. Attach the UniversalKut 12 to the
rear feet of the drawer with the
hardware provided for that
purpose.
•A 3/8¨ wrench and a 1/8¨
Allen key is required.
Warning:
•Torque : 55 in-lbs
•Keep your hand out of reach of
pinch point.
•Do not put your fingers against
the sharp edge of the blade
at any time.
UKUT 12 SETUP
8
5. Insert the drawer assembly on the
track.
5.1. The drawer got 8 heights
positions and 3 depths
positions.
6. Validate the height and the depth
of the UniversalKut 12 with a
siding slide test.
7. Lock the drawer assembly in place
with both quick pin
Warning:
•Keep your hand out of reach of
pinch point.
•Do not put your fingers against
the sharp edge of the blade at
any time.
8. Adjust the drawer feet height so
the feet end touches the ground
and the drawer is leveled
correctly.
Warning:
•Keep your hand out of reach of
pinch point.
•Be sure to firmly tight the
drawer feet handles before the
next step.
•Do not put your fingers against
the sharp edge of the blade at
any time.
UKUT 12 SETUP
9
Adjustment of the Universal bench
extensions.
1. Loosen each handle under the
extensions.
2. Pull the extension at the desired
distance.
3. Tight each handle under the
extensions.
Warning:
•Keep your hand out of reach of
pinch point.
4. Loosen the handle on the
extension feet.
5. Rotate the extension feet to point
toward the ground.
6. Tight the handle on the extension
feet.
Warning:
•Keep your hand out of reach of
pinch point.
EXTENSIONS SETUP
10
7. Adjust the extension feet height so
the feet end touches the ground
and the extension is leveled
correctly.
Warning:
•Keep your hand out of reach of
pinch point.
•Be sure to firmly tight the
extension feet handles before
the next step.
8. Validate the height of the
extension support with a siding
slide test.
Warning:
•Keep your hand out of reach of
pinch point.
9. The extension support can be
installed on the middle extension.
EXTENSIONS SETUP
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
