Siemens 4292 Series Manuale utente

Operating Instructions

Document No. A6V11541947

February 20, 2019

Series 4292 Wireless Sensor System

Site Survey Tool

Page 1 of 2

Product Description

The Site Survey Tool (Siemens P/N 563-089) is a

matched pair of handheld devices that helps

installers optimize the location of sensors and

repeaters within the Series 4292 Wireless Sensor

System.

Each Site Survey Tool includes two handheld

devices with matching ID numbers. Devices with

mismatched IDs will not communicate with each

other.

The Series 4292 Wireless Sensor System Site

Survey tool is designed to assist with determining

optimum number and location of repeaters within a

wireless sensor network. Use of the device is not

intended to be a substitute for a professional RF site

survey.

NOTE: This tool is for use with the Siemens Series

4292 Wireless Sensing System and is not

compatible with other wireless products.

Operating Instructions

1. Turn on both site survey tools and verify that

they are displaying the same measurement

value.

2. Place/mount one of the two survey tools where

you intend to place a sensor. For example, if the

sensor is going to be mounted on a wall, the

survey tool should be mounted or held on the

wall to get the most accurate reading.

3. Place/mount the second survey tool where you

intend to place either the gateway or repeater to

get the most accurate reading.

4. Allow approximately 5 seconds for accurate

measurements to be received.

NOTE: Readings are in real time and will

change as the survey tools are moved.

Signal

Strength

LED Color

Required

Action

-49 to -95dB

Green

Repeater not

required

-96dB to -

97dB

Yellow

Repeater

recommended

<-97xdB

Red

Repeater

required

NOTE: Display will show “---” at readings below

-108dB.

5. Repeat Steps 2 through 4 for all intended sensor

mounting locations.

6. Replace 9V batteries as needed.

Related Documentation

•A6V11521281: Series 4292 Wireless Sensor System

Sensors Installation Instructions

•A6V11536846: Series 4292 Wireless Sensor Syistem

Techical Specification Sheet

•A6V11544782: Series 4292 Wireless Sensor System

User Guide

•Field Server Protocol Driver Sheet BACnet PIC

Statement

Document No. A6V11541947

User Instructions

February 20, 2019

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as

design improvements are introduced. BACnet is a registered trademark of the American Society of Heating, Refrigeration and Air-Conditioning

Industry, Inc.

Siemens Industry, Inc.

Building Technologies Division

1000 Deerfield Parkway

Buffalo Grove, IL 60089-4513

USA

+1-847-215-1000

Your feedback is important to us. If you have

comments about this document, please send them

to [email protected]

Document No. A6V11541947

Printed in the USA

Page 2 of 2

FCC Note:

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Changes or modifications not expressly approved by

the manufacturer for compliance could void the user’s

authority to operate the equipment.

Class B Devices Statement:

Note: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment

and receiver.

•Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV

technician for help.

Canada Note:

This Class B digital apparatus complies with

Canadian ICES-003

Cet appareil numérique de classe B est conforme à la

NMB-003 du Canada

This device complies with Industry Canada license-

exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause

interference, and (2) this device must accept any

interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie

Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et (2)

l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible

d'en compromettre le fonctionnement.

To access complete technical and regulatory details

for the tranceiver module go to the following link.

http://ww1.microchip.com/downloads/en/DeviceDoc/7

5017B.pdf

Indice

Altri manuali Siemens Accessori

Siemens

Siemens Brodersen MC55 Guida all'installazione

Siemens

Siemens Desigo QMX3.P44 Manuale utente

Siemens

Siemens SIMATIC RF640A Manuale utente

Siemens

Siemens QFA3100 Manuale di servizio

Siemens

Siemens SIMATIC RF300 Guida utente

Siemens

Siemens RUGGEDCOM WIN7025 Manuale utente

Siemens

Siemens Milltronics ILE-61 Manuale utente

Siemens

Siemens QVM62.1 Manuale del proprietario

Siemens

Siemens WiPS-200 Series Manuale utente

Siemens

Siemens SITRANS AS100 Manuale utente

Siemens

Siemens 6DR4004-6NN Series Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Siemens

Siemens Wireless Room Sensor Solution Manuale utente

Siemens

Siemens SIMATIC RF300 Guida utente

Siemens

Siemens Milltronics RBSS Manuale utente

Siemens

Siemens AP261 Manuale utente

Siemens

Siemens SITRANS AS100 Manuale utente

Siemens

Siemens 7MH7144 Manuale utente

Siemens

Siemens SIWAREX WL200 Series Manuale utente

Siemens

Siemens 3VL9500 - 4W.30 Manuale utente

Siemens

Siemens SIPART Series Guida per l'amministratore

Siemens

Siemens Milltronics RBSS Manuale utente

Siemens

Siemens QMX3.P30 Manuale utente

Siemens

Siemens QPM11 Series Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente