Siemens RUGGEDCOM WIN7000 Manuale utente
RUGGEDCOM WIN7000
Installation Guide
ii
RUGGEDCOM WIN7000
Installation Guide
Table of Contents
iii
Table of Contents
FCC Statement and Cautions ............................................................................. v
Chapter 1
Introduction .......................................................................................................... 1
1.1 About this Guide .......................................................................................................................... 1
1.2 Capabilities and Features ............................................................................................................. 1
1.3 Safety Information ........................................................................................................................ 2
1.3.1 General ............................................................................................................................. 2
1.3.2 Power Supply Requirements .............................................................................................. 2
1.3.3 Equipment Installation ........................................................................................................ 4
1.3.4 Radio Frequency (RF) Exposure ........................................................................................ 4
1.3.5 Lightning Protection ........................................................................................................... 4
1.3.6 Power Cord Protection ....................................................................................................... 4
1.3.7 Servicing ........................................................................................................................... 4
1.3.8 Antenna Grounding Requirements ...................................................................................... 5
1.3.9 Outdoor Grounding System ................................................................................................ 5
1.3.10 User Ports and Power Supply .......................................................................................... 5
1.3.11 Safety Hazards ................................................................................................................ 5
1.4 WIN7000 Physical Specifications .................................................................................................. 6
Chapter 2
Site and Installation Requirements ..................................................................... 7
2.1 Mounting Considerations .............................................................................................................. 7
Chapter 3
Installation Procedures ........................................................................................ 9
3.1 Pre-Installation Safety Instructions ................................................................................................ 9
3.2 Package Components and Unpacking ........................................................................................... 9
3.3 Installation Tools .......................................................................................................................... 9
3.4 Installing the Base Station .......................................................................................................... 10
3.4.1 Sealing Screw ................................................................................................................. 10
3.4.2 WIN7000 Mounting Bracket .............................................................................................. 11
3.4.3 Pole Mounting ................................................................................................................. 12
3.4.4 Wall Mounting ................................................................................................................. 13
3.4.5 Tower Mount ................................................................................................................... 14
Table of Contents
RUGGEDCOM WIN7000
Installation Guide
iv
3.4.6 Power and Cable Connections ......................................................................................... 15
3.4.6.1 PEC (Copper) Type Base Station .......................................................................... 15
3.4.6.2 SFA (Optical) Type Base Station ............................................................................ 17
3.4.6.3 SFD Type Base Station ......................................................................................... 18
3.4.7 Grounding the Device ...................................................................................................... 21
3.4.8 Installing the GPS Antenna .............................................................................................. 21
3.4.9 2.3GHz Band Cavity Filters Installation ............................................................................. 22
3.5 Weatherproofing ......................................................................................................................... 30
3.5.1 Weatherproofing Cable Connections ................................................................................. 31
3.6 Hazardous Location Information .................................................................................................. 34
3.7 Hazardous Location Installation ................................................................................................... 34
Chapter 4
Setup .................................................................................................................. 37
4.1 Connecting to the WIN7000 Web Interface .................................................................................. 37
Chapter 5
Troubleshooting .................................................................................................. 41
5.1 No IP connectivity ...................................................................................................................... 41
5.2 No Serial Connection ................................................................................................................. 41
Appendix A
Connector and Cable Pinouts ............................................................................ 43
A.1 Power and Ethernet Cable Pinouts ............................................................................................. 43
A.2 Console Cable Pinouts ............................................................................................................... 44
Appendix B
WIN7000 Specifications ..................................................................................... 45
Appendix C
List of Acronyms ................................................................................................ 47
Appendix D
Warranty ............................................................................................................. 49
RUGGEDCOM WIN7000
Installation Guide
FCC Statement and Cautions
v
FCC Statement and Cautions
Federal Communications Commission Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
CAUTION!
Caution: Service
This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall
render all warranties null and void.
Changes or modifications not expressly approved by SIEMENS could invalidate specifications,
test results, and agency approvals, and void the user’s authority to operate the equipment.
CAUTION!
Caution: Physical Access
This product should be installed in a restricted access location where access can only be gained by
service personnel or users who have been instructed about the reasons for the restrictions applied to
the location and about any precautions that shall be taken; and access is through the use of a tool or
lock and key, or other means of security, and is controlled by the authority responsible for the location.
RUGGEDCOM WIN7000
Installation Guide
FCC Statement and Cautions
vi
RUGGEDCOM WIN7000
Installation Guide
Chapter 1
Introduction
About this Guide 1
Introduction
The WIN7000 High Power Base Station is a member of the RUGGEDCOM WIN family, a line of mobile WiMAX
broadband wireless access systems based on the 802.16e mobile WiMAX standard. RUGGEDCOM systems are
designed for robustness and simplicity, offering feature-rich services with low deployment and operation costs.
The WIN7000 is a member of a line of mobile WiMAX broadband wireless access systems based on the 802.16e
mobile WiMAX standard. These systems are designed for robustness and simplicity, offering feature-rich services
with low deployment and operation costs.
The WIN7000 is a cost-effective solution for wireless access services, designed for point-to-multipoint broadband
wireless access applications in varying conditions and locations. It is a one-sector base station.
The base station communicates with fixed and mobile subscriber units, according to defined service criteria and
customer service level agreements. The WIN7000 also connects to the service provider backbone, supporting
end-to-end Quality of Service (QoS) requirements.
The system uses OFDMA radio technology, providing robustness in adverse channel conditions and enabling
Non-Line-Of-Sight (NLOS) operation. This improves coverage and maintains a high level of spectral efficiency.
Modulation and coding are continuously adapted to prevailing link conditions, ensuring an optimal balance
between robustness and efficiency. The use of STC/MRC and MIMO radio technologies optimizes link
performance, ensuring enhanced bandwidth and service coverage.
The RUGGEDCOM WIN7000 is a full outdoor base station, designed for easy installation and mounting on poles,
street lamps, towers, or walls. The WIN7000 can be equipped with copper or fibre network interfaces for flexible
integration into the operator’s backbone.
The WIN7000 is supported by RUGGEDCOM NMS, Siemens’s comprehensive Network Management System.
Section 1.1
About this Guide
This installation guides describes the installation of the WIN7000 High Power Base Station.
This guide is intended for use by base station installers and operators, and assumes readers have a working
knowledge of WiMAX technologies and procedures. While some safety precautions are reviewed here, it
is assumed that installers are trained in safe installation practices. Users unfamiliar with safe installation
procedures, WiMAX technologies, and service procedures should not rely on this manual for comprehensive
guidance.
Section 1.2
Capabilities and Features
The WIN7000 provides the full base station functionality necessary for serving a single sector:
• Supported Frequency Bands: 5251, 5151, 7251
• All-outdoor, single-box installation
• IEEE802.16e Wave2 Standard Compliance
Chapter 1
Introduction
RUGGEDCOM WIN7000
Installation Guide
2 Safety Information
• Backbone Ethernet connectivity via a 10/100 Base-T network interface
• Fixed and mobile CPE support
• 3.5 MHz, 5MHz, 7MHz and 10MHz channel bandwidth support
• MIMO (2×2) support
• Various Radio Frequency (RF) options, including 1.x, 2.x and 3.x GHz band support
• Traffic classification and connection establishment initiation
• Quality of Service (QoS) management
• Alarm management
• Internal SNMP agent, enabling extensive In-Band (IB) management of the base station and its registered CPEs
• R6 interface to ASN-GW profile C
• Power requirement: 48VDC
Section 1.3
Safety Information
Section 1.3.1
General
• Read this user manual and follow all operating and safety instructions.
• The base station and antenna must be installed by a professional installer.
• Do not exceed the described limits.
Section 1.3.2
Power Supply Requirements
• The power supply unit should be a Class 2 power supply, safety-certified according to national codes.
• Maximum output current should not exceed 5A.
• Maximum output voltage of the power supply should not exceed 60VDC.
• Minimum output voltage should not be below 42VDC.
• The disconnecting device is defined as the following:
▪ When connected to an AC/DC power supply, the appliance coupler of the AC/DC power supply is regarded
as the main disconnecting device for the base station.
▪ When connected to a DC battery power supply, a double pole circuit breaker, rated 10A 60VDC, is regarded
as the main disconnecting device for the base station.
The unit is considered to be connected to a centralized DC power system, therefore the power line should be
grounded. The unit should be permanently connected to ground with 16AWG cable or less. See the figures below
for two methods of power grounding (from the UL 60950-1 standard; according to UL 60950-22). When the unit is
connected to a centralized DC Power System, the "+" side of the supply should be grounded, as per UL60950-1
and UL 60950-22 requirements.
RUGGEDCOM WIN7000
Installation Guide
Chapter 1
Introduction
Power Supply Requirements 3
Figure 1: Typical Centralized DC Power System, Plant and Distribution Source-Grounded DC Power System
Figure 2: Typical Centralized DC Power System, Plant and Distribution DC Power System Grounded at Equipment
Location
Chapter 1
Introduction
RUGGEDCOM WIN7000
Installation Guide
4 Equipment Installation
Section 1.3.3
Equipment Installation
Install the equipment in accordance with the electrical code relevant to the country of installation, such as the
National Electrical Code (NEC), ANSI/NFPA 70; the Canadian Electrical Code (CEC), Part 1, CSA C22.1;
and when applicable, the National Electrical Safety Code IEEE C2. Unless marked or otherwise identified, the
Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75, also applies.
Section 1.3.4
Radio Frequency (RF) Exposure
The WIN7000 is compliant with the requirements set forth in CFR 47, section 1.1307, addressing Radio
Frequency (RF) exposure from radio frequency devices as defined in OET Bulletin 65. The emitted radiation
should be as little as possible. To achieve minimum RF exposure, install the WIN7000 when it is configured not
to transmit and set it to operational mode remotely, rather than enabling transmission by the installer on-site. For
maintenance of the WIN7000, or other operations which require RF exposure, the exposure should be minimized
in time and according to the regulations set by the FCC or the regulations relevant to the country of installation.
Section 1.3.5
Lightning Protection
WARNING!
When the WIN7000 is installed in an outdoor location, all indoor components (such as Ethernet and
power supply) should be connected through a lightning protector.
Lightning protection protects people and equipment located indoors from lightning that might strike
the WIN7000 or its outdoor cables. Therefore, install the lightning protector device indoors, as close
as possible to the point where the cables enter the building. The lightning protector can also be
installed outdoors as long as the cables that lead indoors are well protected from lightning between the
protector and the building entrance.
Section 1.3.6
Power Cord Protection
Route all power supply cords so that people cannot walk on them or place objects on or against them. Walking on
the cords or placing objects on or against the cords can damage the cords.
Section 1.3.7
Servicing
Do not open the cover of this product to attempt service unless instructed by a RUGGEDCOM certified
technician. Refer all repairs to qualified service personnel. Removing the covers or modifying any part of this
device voids its warranty.
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Siemens Accessori
Siemens
Siemens SIWAREX WP321 Manuale utente
Siemens
Siemens 38-3AH3 38 kV Manuale utente
Siemens
Siemens SIWAREX WL230 BB-S SA Manuale utente
Siemens
Siemens SIWAREX WL200 Series Manuale utente
Siemens
Siemens SIWAREX WP241 Manuale utente
Siemens
Siemens BS-240 Manuale elenco delle parti
Siemens
Siemens SIMATIC RF640T Gen 2 Manuale utente
Siemens
Siemens SITRANS WS300 Manuale utente
Siemens
Siemens adm-i12w2 Manuale utente
Siemens
Siemens QAM2020.045 Manuale del proprietario
Siemens
Siemens TC12 Guida
Siemens
Siemens WEPS Manuale utente
Siemens
Siemens Opto-BERO K50 Manuale utente
Siemens
Siemens SITRANS WS300 Manuale di servizio
Siemens
Siemens QVM62.1 Manuale utente
Siemens
Siemens SENTRON VL Series Manuale utente
Siemens
Siemens SITRANS FSS200 Manuale utente
Siemens
Siemens 1218RF Manuale utente
Siemens
Siemens QFM3100 Manuale di servizio
Siemens
Siemens Milltronics ILE-61 Manuale utente
Manuali Accessori popolari di altre marche
IFM Electronic
IFM Electronic Efector 250 Series Guida di riferimento
DigiDesign
DigiDesign 888/24 I/O Manuale utente
PROZIS
PROZIS QUAY Manuale utente
patagonia
patagonia PSI Vest Manuale utente
SFC Energy
SFC Energy EFOY GO! Manuale utente
Axminster
Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente