Siemens PAD-5 Series Manuale utente

A6V101030358_en--_c

Siemens Industry, Inc.

Smart Infrastructure

Model PAD-5TM

Intelligent Notification and

Auxiliary Power Expander

Installation

Legal Notice

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

Legal Notice

Technical specifications and availability subject to change without notice.

PAD-5 is a trademark of Siemens Industry, Inc.

Transmittal, reproduction, dissemination and/or editing of this document as well as

utilization of its contents and communication thereof to others without express

authorization are prohibited. Offenders will be held liable for payment of damages. All

rights created by patent grant or registration of a utility model or design patent are

reserved.

Issued by:

Siemens Industry, Inc.

Smart Infrastructure

8 Fernwood Road

Florham Park, NJ 07932

Tel. +1 973-593-2600

www.sbt.siemens.com/FIS

Edition: 2020-02-25

Document ID: A6V101030358_en--_c

Cyber security disclaimer

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

Cyber security disclaimer

Siemens provides a portfolio of products, solutions, systems and services that

includes security functions that support the secure operation of plants, systems,

machines and networks. In the field of Building Technologies, this includes building

automation and control, fire safety, security management as well as physical

security systems.

In order to protect plants, systems, machines and networks against cyber threats, it

is necessary to implement –and continuously maintain –a holistic, state-of-the-art

security concept. Siemens’ portfolio only forms one element of such a concept.

You are responsible for preventing unauthorized access to your plants, systems,

machines and networks which should only be connected to an enterprise network

or the internet if and to the extent such a connection is necessary and only when

appropriate security measures (e.g. firewalls and/or network segmentation) are in

place. Additionally, Siemens’ guidance on appropriate security measures should be

taken into account. For additional information, please contact your Siemens sales

representative or visit https://www.siemens.com/global/en/home/company/topicareas/

future-of-manufacturing/industrial-security.html.

Siemens’ portfolio undergoes continuous development to make it more secure.

Siemens strongly recommends that updates are applied as soon as they are

available and that the latest versions are used. Use of versions that are no longer

supported, and failure to apply the latest updates may increase your exposure to

cyber threats. Siemens strongly recommends to comply with security advisories on

the latest security threats, patches and other related measures, published, among

others, under https://www.siemens.com/cert/en/cert-security-advisories.htm.

Legal Notice

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

Table of Contents

1PAD-5...................................................................................................................5

1.1 Description............................................................................................................5

1.2 Properties.............................................................................................................6

1.3 Regulatory Standards...........................................................................................8

1.4 General Specifications..........................................................................................8

2Installation...........................................................................................................9

2.1 Mounting the Boards ..........................................................................................12

2.2 DPU programming PAD-5-MB and expansion card address.............................13

2.3 Wire Routing.......................................................................................................14

3Wiring the PAD-5..............................................................................................16

3.1 AC Wiring ...........................................................................................................16

3.2 Wiring and Configuring the PAD-5-MB...............................................................17

3.2.1 Wiring Power Supply and Battery to the Main Unit.............................19

3.2.1.1 Battery Compatibility...................................................................................... 20

3.2.1.2 X101 Battery terminal.................................................................................... 21

3.2.2 NAC Circuits.......................................................................................22

3.2.2.1 Wiring the NAC circuits –Class B NAC1 and NAC2 (NAC1......................... 23

Class A) and Class B NAC3 and NAC4 (NAC2 Class A) ............................................... 23

3.2.2.2 NACs (1-4) Configured as Auxiliary Circuits.................................................. 25

3.2.2.3 NACs (1-4) Configured as Shorting Device Inputs......................................... 25

3.2.2.4 NAC Follower Input........................................................................................ 26

3.2.2.5 Wiring X600 NAC Follower Terminal Block ................................................... 26

3.2.2.6 X600 NAC Follower...................................................................................... 28

3.2.3 Dedicated Auxiliary Output (X800).....................................................28

3.2.3.1 Wiring the Dedicated Auxiliary Output........................................................... 28

3.2.3.2 X800 Auxiliary output terminal block.............................................................. 29

3.2.4 FDNet (P2) Wiring and Topologies.....................................................29

3.2.4.1 Wiring X700 FDNet (P2) Input....................................................................... 29

3.2.4.2 X700 FDNet (P2) terminal block.................................................................... 29

3.2.4.3 Topologies..................................................................................................... 30

3.2.5 LED Indicators.....................................................................................33

3.2.6 Switches..............................................................................................34

3.2.6.1 S600 Main Board RESET.............................................................................. 34

3.2.6.2 S601 Reset Status LED switch...................................................................... 34

3.2.6.3 S602 Ground Fault Supervision Switch......................................................... 34

3.3 Technical Data....................................................................................................34

3.4 Battery Size Calculations ...................................................................................36

4Battery Maintenance ........................................................................................38

Model PAD-5

Description

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

1 PAD-5

Figure 1: PAD-5-MB

1.1 Description

The Model PAD-5-MB Main board is an intelligent notification and auxiliary power

expander that provides up to 9 amps @ 24V DC (with FP2012-U1) or 6A @ 24V DC

(with FP2011-U1). The PAD-5 powers notification appliances and auxiliary devices,

and can charge up to 100Ah batteries. It connects to the Fire Panel Device P2 loop

(XDLC in the Desigo Fire Safety Modular and Cerberus PRO Modular systems) and

uses one loop address (not including expansion boards, which have a separate

address). The maximum number of PAD-5 Main Boards and expansion boards

combined is 32 per XDLC. The XDLC is the P2 device loop card for the Desigo Fire

Safety Modular and Cerberus PRO Modular systems.

The purpose of the PAD-5-MB main board is to provide remote power for notification

devices via its NAC 1-4 circuits, and accessory equipment, such as door holders, via

its Auxiliary Output circuit. The PAD-5-MB also allows for an expansion module that

plug into the PAD-5-MB. The expansion headers allow for the connection of a PAD-5-

CDC (Conventional Detector Card) or PAD-5-CLSA (NAC Expansion Card with

Releasing, designations NAC 5-8). Only one expansion module can be connected to

the PAD-5-MB at one time, either conventional zones or NAC/Releasing zones, but not

both.

All NAC outputs and the one dedicated auxiliary output have a maximum combined

current of 9A (with FP2012-U1 300-Watt Power Supply) and 6A (with FP2011-U1 170-

Watt Power Supply). They are all power-limited. If the optional NAC expansion card is

plugged into the PAD-5-MB, the combined current limit for all outputs (NACs 1-8 plus

the auxiliary output) must still meet the 9A or 6A limit. The additional NACs on the

expansion card do not mean additional power; they only allow for additional zones, or

the ability to use NAC5 and NAC 6 for releasing purposes (either 2 Class B or 1 Class

The main board has the battery charger and battery switchover circuit for AC fail or

brownout. The battery size is selectable via the panel configuration tool (e.g., Zeus for

Desigo Fire Safety Modular and Cerberus PRO Modular systems). Two PAD-5-MBs

may share 1 battery set, but one of the PAD-5-MBs needs to have its battery charger

disabled through the configuration tool. Please refer to the Zeus programming manual

(315-034686) for specifics about configuring the PAD-5-MB and its expansion

modules.

NOTE:

Pathway Survivability: Each circuit must be evaluated and tested to ensure compliance

to the application and area of protection to meet the criteria of NFPA 72.

Model PAD-5

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

Parts Supplied

1. (1) PAD-5 Installation Instructions, Document ID A6V101030358

2. (1) Battery Jumper Wire, P/N A5Q00068677

3. (1) PAD-5 Conn Diagram, P/N A5Q00072441

4. (1) Battery Cable, P/N A5Q00069759

5. (5) Terminal Block Plug 4 POS_0.197”P (5MM) Side Entry Screw Down 30-12 AWG

Green Cable End, P/N 150-150581

6. (4) #10-32 Steel-Zinc Plated Serrated Flange Locknut, McMaster P/N 94831A611 or

Equiv.

7. (4) 24K 1/2W Carbon Film End-Line Resistors, P/N 140-034677

8. (1) Daughter bypass card, P/N A5Q00074788, pre-installed on X901. If using an

expansion module, remove this board from X901 and then install the expansion

module. If not using an expansion module, the bypass card installed on X901,

must not be removed. P2 communication troubles will be present if neither an

expansion card or daughter bypass card are installed on the main board.

1.2 Properties

•There are four power limited NAC outputs on the PAD-5-MB which have the

following characteristics:

- NAC 1 through NAC 4 (Wiring configuration Class B or Class A).

- Wiring Class configured through the Zeus configuration tool. Each NAC,

whether Class B or A has a maximum output of 3A @ 24VDC.

- For Class A, the naming configuration is NAC 1 and NAC 2. There are only

two outputs on the PAD-5-MB in Class A.

- For Class B wiring, there are 4 NAC circuits (1-4)

- All NACs provide Temporal 3, Temporal 4, March Time 120, 60, 30, 20 and

Steady On bell/horn patterns and synchronization for strobes.

- All NACs can be configured as additional auxiliary outputs through the

software configuration tool.

- All NACs can be configured through Zeus as shorting device inputs, i.e. for

monitoring dry relay contact. Wiring is limited to Class B and these inputs

can be configured as Supervisory, Status or Trouble inputs.

- All NACs are supervised for opens, shorts, and overcurrent.

- Each NAC has independent short circuit and transient protection.

- EOL values of 2.2K through 24K are acceptable and do not need

configuring through the tool.

- Status LEDs for each of the NACs indicate if the specific output is in trouble,

or was previously in trouble, in the case of an intermittent fault.

•There is one dedicated power limited auxiliary output that has the following

characteristics:

- Auxiliary output is rated a maximum of 3A @ 24VDC

- Supervised for shorts

- Short circuit, overcurrent and transient protection

- Status LED indicates if output is in trouble, or was previously in trouble, in

the case of an intermittent fault Integrated P2 loop circuitry for connection

to Fire Panel device loop (P2) with isolation from short circuit capabilities.

Model PAD-5

Properties

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

•One supervised NAC Follower Input Circuit (supervised at the source, not

supervised by the PAD-5-MB). Either a FACP, or a PAD-5-MB can be the

driving sources, and the PAD-5-MB will follow the pattern. In order to maintain

synchronization across multiple P2 cores, the NAC follower input must be

used. The maximum combined number of PAD-5-MB and PAD-5-CLSA that

can be connected and maintain synchronization is 32 on the same P2 loop.

•The PAD-5-MB has 1 address, and it is configured with the DPU. Make sure

the DPU FW revision is at least Rev 09.01.0022, so that the PAD-5-MB and

expansion boards are supported.

•The main board has connectors (X900, X901) that can support one of two

available expansion boards:

- (PAD-5-CLSA) S54339-A6-A1 –NAC expansion card that provides four

additional NAC circuits (NAC5-8). They have the same properties as the

onboard NAC circuits. Programming its address is done via the DPU

(Refer to the PAD-5-CLSA Installation Instructions for more details,

Document ID A6V101030359). All configuring of the card is done through

the configuration tool. The NACs can be configured as 4 Class B or 2

Class A, or any combination of A or B circuits. The NACs can be

configured as auxiliary outputs through the software configuration tool. The

NACs are rated 3A @ 24VDC.

- In addition, the NAC expansion card can be set for releasing applications

and configured for sprinkler or extinguishing agents. Only NAC 5 and 6

can be used as two Class B releasing zones, or one Class A releasing

zone.

- (PAD-5-CDC) S54339-A7-A1 –Conventional Zone Module that supports

four Class A or Class B conventional detection zones.

•Compatibility with Desigo Fire Safety Modular and Cerberus PRO Modular

FACP via the XDLC Card.

•Two different power supplies can be connected:

- Power Supply (170W) FP2011-U1 only for PAD-5-MB with a maximum

loading of 6A, or Power Supply (300W) FP2012-U1 only for PAD-5-MB

with a maximum loading of 9A.

NOTE: The battery charger is capable of charging up to 100 Ah batteries

at a maximum charging current of 6 A.

NOTE 2: Power Supply (300W) FP2012-U1 must be used for batteries of

35 Ah, up to 100Ah.

NOTE 3: Power Supply (170W) FP2011-U1 can be used for batteries 35

Ah or less.

NOTE 4: Status LEDs indicate No Charge, Bulk Mode, Absorption Mode,

or Float Mode.

NOTE 5: The PAD-5-MB has a built-in battery-cut off set to 19.3V. This is

not user configurable and cannot be disabled. If running on battery for an

extended time, when the battery voltage reaches 19.3V, the PAD-5-MB will

disconnect from batteries and power itself off. The P2, however, will still

have limited communication because its power comes from the XDLC, not

the PAD-5-MB.

NOTE 6: The battery charger is temperature compensated, to help

increase the life of the batteries. Because very hot environments can

shorten the life of batteries, the panel is set to disable the charger if the

Model PAD-5

Regulatory Standards

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

temperature inside the box reaches 140ºF (60ºC). This is for safety and

cannot be adjusted or disabled.

•Ground fault detected at <1kΩ to ground.

•Ground fault detection for all circuits except the NAC Follower Input circuit.

NAC configuration choices

PAD-5-MB

PAD-5-CLSA

X300

X400

X300

X400

NAC

EOL Required?

Sync/coded pattern

Yes (2.2K –24K)

Auxiliary Power

Output

Releasing

YES (REL-EOL)

Shorting device input

YES (2.2K-24K)

1.3 Regulatory Standards

The PAD-5 meets the requirements of industry and government regulatory

agencies as noted.

NFPA 70 National Electrical Code

NFPA 72 National Fire Alarm Code

C22.1 Part 1 Canadian Electrical Code

Underwriters Laboratories

UL 864 Standards for Control Units and Accessories

ULC S527 Standard for Control Units for Fire Alarm Systems

UL 2017 Standard for General Purpose Signaling Devices

UL 2572 Standard for Mass Notification Systems

ULC S576 Standard for Canadian Mass Notification System

UL 1076 Standard for Proprietary Burglar Alarm Units

Federal Communications Commission

The PAD-5 meets the Class A requirements of the Code of Federal

Regulations (CFR 47), Part 15, Subpart 15, for electromagnetic field

emissions.

1.4 General Specifications

•Operating temperature

32 –120ºF (0 –49ºC)

•Relative humidity

Up to 93%RH @ 86ºF (30ºC) non-considering

Model PAD-5

General Specifications

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

2 Installation

POWER SUPPLY

PAD-5-MB

ENCLOSURE

18 AH

BATTERIES

Figure 2: Typical Configuration

Enclosure Dimensions Door Dimensions

Width: 16 inches Width: 16 ½ inches

Length: 24 inches Length: 24.6 inches

Height: 3 ½ inches Height: 0.63 inches

CAUTION:

It is recommended that the printed circuit boards be removed for any procedure that

may cause dust, metal shavings, grease, or any such matter that may affect the cir-

cuit boards and/or parts. All field wiring and connections to the PAD-5-MB must be

disconnected, and AC must be disconnected before removing fasteners and remov-

ing the board assembly from the enclosure.

Model PAD-5

General Specifications

Siemens Industry, Inc.

A6V101030358_en--_c

Smart Infrastructure

TYPICAL CONFIGURATION

1. Enclosure, Model ENCL/DOOR PAD-5, P/N S54339-A9-A1 (Red), or P/N

S54339-A8-A1 (Black)

2. 170W Power Supply, Model FP2011-U1, P/N 500-450222 (Installation

Instruction P/N 315-050222) or 300W Power Supply, Model FP2012-U1, P/N

S54400-Z60-A1 (Document ID A6V10334250)

3. PAD-5-MB, P/N S54339-A5-A1

4. Max. Battery Size inside enclosure, 18AH Batteries, BP-61 P/N 175-387194

Figure 3: Typical Configuration

ADAPTER PLATE

WITH PAD-5-MB

FP2012-U1 (300W)

POWER SUPPLY

FP2011-U1 (170W)

POWER SUPPLY

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Siemens Hardware per computer

Siemens

Siemens CP 5613 A3 Manuale utente

Siemens

Siemens SIMATIC NET CP 1623 Manuale utente

Siemens

Siemens SIMATIC NET CP 5512 Manuale utente

Siemens

Siemens 6GK7343-1EX10-0XE0 Manuale utente

Siemens

Siemens Simatic 545-1106 Manuale utente

Siemens

Siemens SIMATIC NET 6GK7 443-5FX02-0XE0 Manuale utente

Siemens

Siemens Simatic S7-300 CP 341 Manuale utente

Siemens

Siemens Gigaset USB adapter 54 Manuale utente

Siemens

Siemens PAD-5-CLSA Manuale utente

Siemens

Siemens SIMATIC NET CP 443-1 Advanced Manuale utente

Siemens

Siemens SIMATIC S7-400 CP 440 Manuale utente

Siemens

Siemens TC35i Terminal Manuale utente

Siemens

Siemens SIMATIC S7-1200 Manuale utente

Siemens

Siemens SIMATIC S7-1200 CP 1243-8 IRC Manuale utente

Siemens

Siemens SIMATIC CP 340 Manuale utente

Siemens

Siemens SIMATIC NET CP 243-1 IT Manuale utente

Siemens

Siemens Metro 21 M216KASPC Manuale utente

Siemens

Siemens SIMATIC NET CP 5622 Manuale utente

Siemens

Siemens CPU 412-1 Manuale utente

Siemens

Siemens XMS-SP Manuale utente

Siemens

Siemens System 600 APOGEE Manuale utente

Siemens

Siemens CC-5 Manuale utente

Siemens

Siemens CP 1612 A2 Manuale utente

Siemens

Siemens SIMATIC NET CP 5603 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente