Siemens Simatic M7-400 Manuale utente

Preface, Contents

General Technical Specifications 1

Racks 2

Power Supply Modules 3

Digital Modules 4

Analog Modules 5

Interface Modules 6

IM 463-2 7

PROFIBUS DP Master Interface

IM 467/IM 467 FO 8

Cable Duct and Fan

Subassemblies 9

RS 485 Repeater 10

CPUs for M7-400 11

M7-400 Expansions 12

Interface Submodules 13

Appendices LEERE

Parameter Sets for

Signal Modules A

Diagnostic Data of the

Signal Modules B

Spare Parts and Accessories C

Guidelines for Handling Electro-

static Sensitive Devices (ESD) D

List of Abbreviations E

Glossary, Index

S7-400, M7-400 Programmable

Controllers

Module Specifications

Reference Manual

SIMATIC

This manual is part of the documentation

package with the order number:

6ES7498-8AA03-8BA0

Edition 09/2003

A5E00069467-07

!Danger

indicates that death, severe personal injury or substantial property damage will result if proper precau-

tions are not taken.

!Warning

indicates that death, severe personal injury or substantial property damage can result if proper

precautions are not taken.

!Caution

indicates that minor personal injury can result if proper precautions are not taken.

Caution

indicates that property damage can result if proper precautions are not taken.

Notice

draws your attention to particularly important information on the product, handling the product, or to a

particular part of the documentation.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment. Qualified persons

are defined as persons who are authorized to commission, to ground and to tag circuits, equipment, and

systems in accordance with established safety practices and standards.

Correct Usage

Note the following:

!Warning

This device and its components may only be used for the applications described in the catalog or the

technical description, and only in connection with devices or components from other manufacturers

which have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed

correctly, and operated and maintained as recommended.

Trademarks SIMATIC, SIMATIC HMIand SIMATIC NETare registered trademarks of SIEMENS AG.

Third parties using for their own purposes any other names in this document which refer to trademarks

might infringe upon the rights of the trademark owners.

Safety Guidelines

This manual contains notices intended to ensure personal safety, as well as to protect the products and

connected equipment against damage. These notices are highlighted by the symbols shown below and

graded according to severity by the following texts:

We have checked the contents of this manual for agreement

with the hardware and software described. Since deviations

cannot be precluded entirely, we cannot guarantee full

agreement. However, the data in this manual are reviewed

regularly and any necessary corrections included in

subsequent editions. Suggestions for improvement are

welcomed.

Disclaim of Liability

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including

rights created by patent grant or registration of a utility model

or design, are reserved.

Siemens AG

Bereich Automation and Drives

Geschaeftsgebiet Industrial Automation Systems

Postfach 4848, D- 90327 Nuernberg Siemens AG 1999-2003

Technical data subject to change.

Siemens Aktiengesellschaft A5E000069467-07

iii

S7-400, M7-400 Programmable Controllers Module Specifications

A5E00069467-07

Preface

Purpose of the Manual

The manual contains reference information on operator actions, descriptions of

functions and technical specifications of the central processing units, power supply

modules and interface modules of the S7-400.

How to configure, assemble and wire these modules in an S7-400 or M7-400

system is described in the installation manuals for each system.

Required Basic Knowledge

You will need a general knowledge of automation to understand this manual.

In addition, you are required to know how to use computers or devices with similar

functions (e. g. programming devices) under Windows 95/98/2000 or NT operating

systems. Since S7-400 is configured with the STEP 7 basic software, you have to

have a good working knowledge of the software. You can acquire this knowledge in

the manual “Programming with STEP 7”. Read the notes on the safety of electronic

controllers in the appendix of the Installation manual – especially when using a

S7-400 in safety–relevant areas.

Target Group

This manual is aimed at people with the required qualifications to commission,

operate and maintain the products described.

Where is this Manual valid?

The manual is valid for the S7-400, M7-400 programmable controller.

Preface

iv S7-400, M7-400 Programmable Controllers Module Specifications

A5E00069467-07

Changes Compared to the Previous Version

Since the previous version of the “Module Specifications” reference manual, the

following changes have been made:

•The descriptions of the CPU and the CPU relevant products and topics have

been put together in one manual, “CPU Specifications”.

•The descriptions of the H CPUs and their associated products and topics have

been moved to the manual “S7–400 H Programmable Controller, Redundant

Systems”

Note: The previous version of this “Module Specifications” reference manual can

be recognized by the number in the footer: A5E00069467-06.

The current number is: A5E00069467-07.

Certification

The SIMATIC S7-400 product range has the following certificates:

•Underwriters Laboratories, Inc.: UL 508 (Industrial Control Equipment)

•Canadian Standards Association: CSA C22.2 Nummer 142 (Process Control

Equipment)

•Factory Mutual Research: Approval Standard Class Number 3611.

You can find details on the certificates and approvals in the reference manual

“Module Specifications”.

CE Labeling

The SIMATIC S7-400 product range complies with the requirements and protection

objectives of the following EU directives:

•EC low voltage directive 73/23/EEC

•EC electromagnetic compatibility directive 89/336/EEC

C-Tick Mark

The SIMATIC S7-400 product range complies with the requirements of the

AS/NZS 2064 standard (Australia and New Zealand).

Standards

The SIMATIC S7-400 product range complies with the requirements and criteria of

the IEC 61131-2.

Place of this Documentation in the Information Environment

This manual forms part of the S7-400 and M7-400 documentation.

Preface

S7-400, M7-400 Programmable Controllers Module Specifications

A5E00069467-07

System Documentation Package

S7-400/M7-400 •S7-400, M7-400 Programmable Controllers; Hardware and

Installation

•S7-400, M7-400 Programmable Controllers; Module Specifications

•Automation System S7-400 CPU Data

•S7-400 Instruction List

Finding Your Way

To help you find special information quickly, the manual contains the following

access aids:

•At the start of the manual you will find a complete table of contents and a list of

the diagrams and tables that appear in the manual.

•An overview of the contents of each section is provided in the left column on

each page of each chapter.

•You will find a glossary in the appendix at the end of the manual. The glossary

contains definitions of the main technical terms used in the manual.

•At the end of the manual you will find a comprehensive index which gives you

rapid access to the information you need.

Preface

vi S7-400, M7-400 Programmable Controllers Module Specifications

A5E00069467-07

Specific Information for S7-400

You require the following manuals and manual packages in order to program and

commission an S7-400:

Manual/

Manual Package Contents

Standard Software

for S7 and M7

STEP 7 Basic

Information

•Installing and starting up STEP 7 on a programming device / PC

•Working with STEP 7 with the following contents:

Managing projects and files

Configuring and assigning parameters to the S7-400 configuration

Assigning symbolic names for user programs

Creating and testing a user program in STL/LAD

Creating data blocks

Configuring the communication between two or more CPUs

Loading, storing and deleting user programs in the CPU / programming device

Monitoring and controlling user programs

Monitoring and controlling the CPU

•Guide for efficiently implementing the programming task with the programming

device / PC and STEP 7

•How the CPUs work (for example, memory concept, access to inputs and

outputs, addressing, blocks, data management)

•Description of STEP 7 data management

•Using data types of STEP 7

•Using linear and structured programming

•Using block call instructions

•Using the debug and diagnostic functions of the CPUs in the user program (for

example, error OBs, status word)

STEP 7 Reference

Information

Statement List (STL)

for S7-300 and

S7-400

Ladder Logic (LAD)

for S7-300 and

•Basic procedure for working with STL, LAD, or FBD (for example, structure of

STL, LAD, or FBD, number formats, syntax)

•Description of all instructions in STEP 7 (with program examples)

•Description of the various addressing methods in STEP 7 (with examples)

•Description of all functions integrated in the CPUs

•Description of the internal registers in the CPU

300

S7-400

Function Block

Diagram (FBD) for

S7-300 and S7-400

System and

Standard Functions

Description of the internal registers in the CPU

•Description of all system functions integrated in the CPUs

•Description of all organization blocks integrated in the CPUs

Manual

PG 7xx

•Description of the programming device hardware

•Connecting a programming device to various devices

•Starting up a programming device

Preface

vii

S7-400, M7-400 Programmable Controllers Module Specifications

A5E00069467-07

Specific Information for M7-400

This documentation package describes the hardware of the M7-400. You will need

the following additional documentation for programming and starting up an M7-400:

Documentation Contents Order No.

System Software for

M7-300/400 Program Design

Programming Manual

Designing, writing and testing a C program

for M7 CPU/FM modules with the M7 SYS

programming package, using the M7 SYS

functions

6ES7802-0FA14-0BA0

System Software for

M7-300/400 System and

Standard Functions

Reference Manual

Detailed description of the M7 SYS functions

and data structures, listing of messages

types

System Software for

M7-300/400 Installation and

Operation

User Manual

Installing and configuring the operating

system and system software

Recycling and Disposal

The S7-400 is environmentally friendly and can thus recyclable. Consult a certified

disposal agency for electronics junk to recycle and dispose of your old equipment

in an environmentally friendly manner.

Further Support

If you have any technical questions, please get in touch with your Siemens

representative or agent responsible.

http://www.siemens.com/automation/partner

Training Centers

Siemens offers a number of training courses to familiarize you with the SIMATIC S7

automation system. Please contact your regional training center or our central

training center in D 90327 Nuremberg, Germany for details:

Telephone: +49 (911) 895-3200.

Internet: http://www.sitrain.com

Preface

viii S7-400, M7-400 Programmable Controllers Module Specifications

A5E00069467-07

A&D Technical Support

Worldwide, available 24 hours a day:

Johnson City

Nuernberg

Beijing

Technical Support

Worldwide (Nuernberg)

Technical Support

24 hours a day, 365 days a year

Phone: +49 (180) 5050-222

Fax: +49 (180) 5050-223

E-Mail: adsupport@

siemens.com

GMT: +1:00

Europe / Africa (Nuernberg)

Authorization

Local time: Mon.-Fri.

8:00 AM to 5:00 PM

Phone: +49 (180) 5050–222

Fax: +49 (180) 5050-223

E-Mail: adsupport@

siemens.com

GMT: +1:00

United States (Johnson City)

Technical Support and

Authorization

Local time: Mon.-Fri.

8:00 AM to 500 PM

Phone: +1 (423) 262 2522

Fax: +1 (423) 262 2289

E-Mail: simatic.hotline@

sea.siemens.com

GMT: –5:00

Asia / Australia (Beijing)

Technical Support and

Authorization

Local time: Mon.-Fri.

8:00 AM to 5:00 PM

Phone: +86 10 64 75 75 75

Fax: +86 10 64 74 74 74

E-Mail: adsupport.asia@

siemens.com

GMT: +8:00

The languages of the SIMATIC Hotlines and the authorization hotline are generally German and English.

Preface

S7-400, M7-400 Programmable Controllers Module Specifications

A5E00069467-07

Service & Support on the Internet

In addition to our documentation, we offer our Know-how online on the internet at:

http://www.siemens.com/automation/service&support

where you will find the following:

•The newsletter, which constantly provides you with up–to–date information on

your products.

•The right documents via our Search function in Service & Support.

•A forum, where users and experts from all over the world exchange their

experiences.

•Your local representative for Automation & Drives via our representatives

database.

•Information on field service, repairs, spare parts and more under “Services”.

Preface

xS7-400, M7-400 Programmable Controllers Module Specifications

A5E00069467-07

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Siemens Hardware per computer

Siemens

Siemens SIMATIC NET CP 443-1 Advanced Manuale utente

Siemens

Siemens SIMATIC NET CP 443-5 Extended Manuale utente

Siemens

Siemens CC-5 Manuale utente

Siemens

Siemens SIMATIC NET CP 5613 A2 Manuale utente

Siemens

Siemens SIMATIC CP 541 Manuale utente

Siemens

Siemens SPEEDSTREAM SS1021 Manuale utente

Siemens

Siemens TC35i Terminal Manuale utente

Siemens

Siemens XMS-SP Manuale utente

Siemens

Siemens Metro 21 M216KASPC Manuale utente

Siemens

Siemens SIMATIC S7-1200 CP 1243-8 IRC Manuale utente

Siemens

Siemens Simatic 545-1106 Manuale utente

Siemens

Siemens Simatic S7-300 Manuale di istruzioni

Siemens

Siemens SIMATIC NET 6GK7 443-5FX02-0XE0 Manuale utente

Siemens

Siemens SMP16-CPU06 Series Manuale utente

Siemens

Siemens CP 1243-8 IRC Manuale utente

Siemens

Siemens EB1 Manuale utente

Siemens

Siemens SIMATIC CP 340 Manuale utente

Siemens

Siemens SIMATIC CP 340 Manuale utente

Siemens

Siemens Simatic S7-300 31xC Series Manuale utente

Siemens

Siemens PAD-5-CLSA Manuale utente

Siemens

Siemens SIMATIC NET CP 1623 Manuale utente

Siemens

Siemens SED2 Series Manuale utente

Siemens

Siemens CP 1612 A2 Manuale utente

Siemens

Siemens SIMATIC NET CP 243-1 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente