Siemens VNT Manuale utente

SiemensSiemens

Siemens IndustryIndustry

IndustryIndustry

Industry,,

,Inc.Inc.

Inc.Inc.

Inc.

BuildingBuilding

Building

Tecec

ecec

echnologies Dihnologies Di

hnologies Dihnologies Di

hnologies Divisionvision

visionvision

vision

P/N 315-050490-3

Virtual Network Tunnel

Installation Instructions

ModelVNT

INTRODUCTION The Model VNT Virtual Network Tunnel (as shown in Figure 1) from Siemens Industry,

Inc. is a UL approved fanless single board computer that is powered from its local

24V power supply with battery back up. The VNT Gateway is responsible for support-

ing the intercommunication of system components.

It transports HNET and XNET supervision and

monitoring between VNTs via TCP/IP. It also routes

audio overTCP/IP when required between VNTs. If

the VNT Gateway is at a control point, it is respon-

sible for generating audio from the local source.

The VNT Gateway utilizes some or all of the

following interfaces depending upon its location

within the system:

• 100BaseTTCP/IP connection to a local Fiber Ring Switch. This connection

transports the network signals (HNET and XNET), audio, supervision and

monitoring data streams.

• One or more independent HNET RS485 interfaces to the module network of an

XLS/Desigo Fire Safety Modular/Cerberus PRO Modular or its components.

• An XNET RS485 interface to the XLS/Desigo Fire Safety Modular/Cerberus

PRO Modular node(s) within a given system.

• An XNET overTCP/IP feed to an NCC at a command center.

• An HNET RS485 interface to an XLS/Desigo Fire Safety Modular/Cerberus

PRO Modular node within a given system.

• An audio input to accept a microphone paging source.

• An audio output to distribute paging audio to a given system.

INSTALLATION The VNT mounts on a VNT-MP in a CAB1, CAB2 or CAB3 enclosure. Refer to the VNT-MP

Installation Instructions, P/N 315-050489, for information on mounting the VNT-MP.

Remove all system power before installation, first battery then AC. (To power up,

connect the AC first, then the battery.)

The following items are supplied with the VNT (P/N 500-650490):

QuantityItem

1 VNT fanless computer

1 Cable P/N 555-150464

1 Cable P/N 555-150494 (to fiber switch)

4 #8-32 hex nuts

Figure 1

Virtual Network Tunnel

Siemens Industry, Inc.

Building Technologies Division

P/N 315-050490-32

VNT Mounting Refer to Figure 2.

The VNT mounts at the top of the VNT mounting plate with the four hex nuts provided.

1. Place the VNT over the four studs on the VNT-MP.

2. Place the four hex nuts supplied over the studs and tighten them to secure

the VNT to the VNT-MP.

VNT

STUDS (4) FOR

MOUNTING VNT

VNT-MP

FIBER SWITCH

MOUNTING RAIL

XND BRACKET

Figure 2

Mounting the VNT to the VNT-MP

WIRING Wiring for the VNT-Building Configuration is shown in Figure 3. Wiring for the VNT-Fire

Command Center is shown in Figure 4.

All connections are supervised and power limited unless otherwise stated.

ELECTRICAL RATINGS For power, the VNT may only be connected to the VNT-PS (P/N 500-450491).

Input Voltage: Regulated 24VDC

Input Current: 1.7A @ 24VDC max.

Siemens Industry, Inc.

Building Technologies Division

P/N 315-050490-33

FIRE SYSTEM

GND

TB1

TB2

BATTERY

P9 P12

TB3

TB4

OFF

O —

P10

HNET/CAN

1 2

Figure 3

Connection Diagram for VNT-Building

Siemens Industry, Inc.

Building Technologies Division

P/N 315-050490-34

Figure 4

Connection Diagram for VNT-FCC (Fire Command Center)

GND

TB1

TB2

BATTERY

P9 P12

TB3

TB4

OFF

O —

P10

HNET/CAN

P2P5

P7 P4 P3

*GND

(GND IS THICK

BLACK WIRE.

CUT THIN

BLACK WIRE.)

LCM-8

SCM-8

LCM-8

SCM-8

LCM-8

SCM-8

LCM-8

SCM-8

LCM-8

SCM-8

LCM-8

SCM-8

LCM-8

SCM-8

LCM-8

SCM-8

Buzzer

12345678 12345678

LCM-8

SCM-8

LCM-8

SCM-8

LCM-8

SCM-8

LCM-8

SCM-8

CAN TERMINATOR

P/N 110-134215

BLACK

RED

WHITE

GREEN

WHITE

BLACK

WHITE

Siemens Industry, Inc.

Building Technologies Division

P/N 315-050490-35

Cyber security disclaimer

Siemens products and solutions provide security functions to ensure the secure operation of building comfort,

fire safety, security management and physical security systems. The security functions on these products and

solutions are important components of a comprehensive security concept.

It is, however, necessary to implement and maintain a comprehensive, state-of-the-art security concept that is

customized to individual security needs. Such a security concept may result in additional site-specific preventive

action to ensure that the building comfort, fire safety, security management or physical security system for your

site are operated in a secure manner. These measures may include, but are not limited to, separating networks,

physically protecting system components, user awareness programs, defense in depth, etc.

For additional information on building technology security and our offerings, contact your Siemens sales or

project department. We strongly recommend customers to follow our security advisories, which provide infor-

mation on the latest security threats, patches and other mitigation measures.

http://www.siemens.com/cert/en/cert-security-advisories.htm

Siemens Industry, Inc.

Building Technologies Division

P/N 315-050490-36

THIS PAGE HAS BEEN LEFT INTENTIONALLY BLANK.

Siemens Industry, Inc.

Building Technologies Division

P/N 315-050490-37

THIS PAGE HAS BEEN LEFT INTENTIONALLY BLANK.

Siemens Industry, Inc.

Building Technologies Division

Florham Park, NJ

Siemens Canada, Ltd.

1577 North Service Road East

Oakville, Ontario

L6H 0H6 Canada

P/N 315-050490-3Document ID A6V10316286

Indice

Altri manuali Siemens Portale

Siemens

Siemens RUGGEDCOM WIN5151 Manuale utente

Siemens

Siemens Gigaset SE568 Manuale utente

Siemens

Siemens Tiastar LV MCC Manuale utente

Siemens

Siemens DESIGO RXC Manuale utente

Siemens

Siemens HiPath HG 1500 Manuale utente

Siemens

Siemens SIMATIC PN/M-Bus LINK Manuale utente

Siemens

Siemens MindConnect Nano Manuale utente

Siemens

Siemens DCW1151 Manuale utente

Siemens

Siemens WTT563 Series Manuale utente

Siemens

Siemens SIMATIC IOT Gateway MQTT Guida utente

Siemens

Siemens SIMATIC FDE Gateway V1.1 Documento tecnico

Siemens

Siemens SIMATIC RTLS Series Guida all'applicazione

Siemens

Siemens SCALANCE X-200 Manuale utente

Siemens

Siemens SIMATIC PN/J1939 LINK Manuale utente

Siemens

Siemens Cerberus GW-21 Manuale utente

Siemens

Siemens MindConnect Nano Manuale utente

Siemens

Siemens OCT200.KNBA Manuale utente

Siemens

Siemens SpeedStream 6500 Series Manuale utente

Siemens

Siemens FDCW221 Manuale utente

Siemens

Siemens Gigaset SE567 Manuale utente

Siemens

Siemens FDCW221 Manuale utente

Siemens

Siemens NK8225 Manuale operativo

Siemens

Siemens WTT568 Series Manuale utente

Siemens

Siemens 5WG1143-1AB01 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente