Siemens C2-010 Manuale utente
Quick Start Guide
SIEMENS ADSL C2-010
ADSL Bridge Modem
• Do never open the housing!
• Use only the power supply provided with this device.
• Use only the cables provided with this device and do
not perform any modifications on them.
01-050927
s
2
Before you begin
Verify that the following items came with your SIEMENS ADSL C2-010 Bridge Modem kit:
System Requirements
Before starting the installation of the ADSL Bridge Modem, make sure your computer is
equipped with:
• Internet Browser (Internet Explorer or Netscape) installed
• LAN interface (Ethernet) with RJ45 socket (Windows 95, 98, NT4, ME, 2000, XP,
Macintosh, Linux)
ADSL Bridge Modem Quick Start Guide CD-ROM Power supply
ADSL cable Ethernet cable
(gray) (yellow)
ADSL Ethernet 9V 1A
Optional:
Your service provider may include Stand-alone Line Filter(s) and Y-Line Filter(s). If you have
received any of these items, follow the instructions provided in this guide for basic installation.
If you need further assistance installing these items, please contact your service provider.
Stand-alone
Line Filter
Y-Line Filter
3
Step 1:
Install the Line Filter
Stand-alone Line Filter
For each device that shares the ADSL phone number:
1. Unplug the device’s cord from the phone jack.
2. Plug the filter into the phone jack.
3. Plug the phone cord (or other device cord)
into the filter.
Devices such as fax machines or phones that share the same phone number as your ADSL
account require a line filter, which prevents modem noise from disrupting the ADSL signal on
the phone line. Filters can be in the form of a stand-alone Line Filter or a Y-Line Filter. The Y-
Line Filter can be used if your ADSL modem will share the same phone jack with another
device.
Y-Line Filters
If your ADSL modem and another device will
share the same phone jack, install a Y-Line
Filter:
1. Unplug the device’s cord from the phone
jack.
2. Plug the Y-Line Filter into the phone jack.
3. Plug the phone cord (or other device cord)
into the ”PHONE” jack of your Y-Line Filter.
4. Plug the ADSL cord into the ”ADSL” jack of
your Y-Line Filter.
1.
2.2. 3.
2.
3.
4.
4
Step 2:
Connect the ADSL Bridge Modem via Ethernet interface
1. With your computer off, plug the end of the ADSL cable (gray) into the DSL port of your
ADSL Bridge Modem.
2a. Connect the Ethernet cable (yellow) to the LAN port of your ADSL Bridge Modem.
2b. Connect the other end of the Ethernet cable to the LAN port of your computer.
3. Connect the power supply to your ADSL Bridge Modem.
4. Plug the power plug into a power outlet.
5. Turn your computer on and wait until your operating system (OS) is started up.
6. Proceed with step 3 on the next page (Read first the introduction and continue then with
the paragraph related to your operating system).
long ADSL cable (black)
direction ISDN ADSL splitter
Ethernet cable (yellow)
Computer
ADSL Bridge Modem
1. 2a.
2b.
3.
5
Step 3:
Configure the PC (TCP/IP settings)
Introduction
In step 3, you will learn how to configure your computer to communicate with ADSL Bridge
Modem.
To do this, you will need to configure your PC’s network settings to obtain an IP address auto-
matically. Computers use IP addresses to communicate with each other across a network or the
Internet.
Find out which operating system your computer is running, such as Windows 95, Windows 98,
Windows Me, Windows NT4, Windows 2000 or Windows XP.
You will need to know which operating system your computer is running. You can find out by
clicking on Start -> Settings. (If your Start menu doesn’t have a Settings option, you are run-
ning Windows XP. You can select the Control Panel directly from the Start menu.) Then, click on
Control Panel and double-click on the System icon.
Click the Cancel button when done.
Once you know which operating system you are running, follow the directions in this step for
your computer’s operating system. The next few pages tell you, step by step, how to configure
your TCP/IP settings based on the type of Windows operating system you are using.
6
Windows 95 users need the Windows 95 Installation CD to complete the
installation.
1. Click on Start -> Settings -> Control Panel.
Double-click on the Network icon to open
the Network screen.
2. Select the Configuration tab and highlight
the TCP/IP line for the applicable Ethernet
adapter1). If the word TCP/IP appears by
itself, select that line2). Click on Properties.
3. Click the IP Address tab and select Obtain
an IP address automatically.
4. Click on the Gateway tab and verify that
the Installed Gateway field is blank. Click
on OK.
5. Click again on OK. Windows ask you for the
original Windows installation disk or addi-
tional files. Supply them by pointing to the
correct location, e.g. D:\win98, where “D”
represents the letter of your CD-ROM drive.
6. If Windows asks you to restart your PC, click
on Yes. If Windows does not ask, restart
your computer anyway.
Step 3a:
Configure the PC (TCP/IP) settings
for Windows 95
1) Choose a TCP/IP entry whose name contains Ethernet adapter. Do not choose
a TCP/IP entry whose name is PPPoE, VPN or other.
2) If there is no TCP/IP line listed, refer to the User Manual on your Aehtra CD-ROM
to install TCP/IP now.
2
3
7
1) Choose a TCP/IP entry whose name contains Ethernet adapter. Do not choose
a TCP/IP entry whose name is PPPoE, VPN or other.
2) If there is no TCP/IP line listed, refer to the User Manual on your Aethra CD-ROM
to install TCP/IP now.
Windows 98 users need the Windows 98 Installation CD to complete the installa-
tion.
1. Click on Start -> Settings -> Control Panel.
Double-click on the Network icon to open
the Network screen.
2. Select the Configuration tab and highlight
the TCP/IP line for the applicable Ethernet
adapter1). If the word TCP/IP appears by itself,
select that line2). Click on Properties.
3. Click the IP Address tab and select Obtain
an IP address automatically.
4. Click on the Gateway tab and verify that the
Installed Gateway field is blank. Click on
OK.
5. Click again on OK. Windows may ask you for
the original Windows Installation disk or
additional files. Supply them by pointing to
the correct location, e.g. D:\win98, where
“D” represents the letter of your CD-ROM
drive.
6. If Windows asks you to restart your PC, click
on Yes. If Windows does not ask, restart
your computer anyway.
Step 3b:
Configure the PC (TCP/IP settings)
for Windows 98 and Windows ME
2
3
8
Step 3c:
Configure the PC (TCP/IP settings)
for Windows NT4
1. Click on Start -> Settings -> Control Panel.
Double-click on the Network icon. The
Network screen will appear.
2. Select the Protocol tab and highlight the
TCP/IP line. Click on Properties.
3.Select the IP Address tab and select Obtain
an IP address from a DHCP server and click
on OK on the subsequent screens to com-
plete the PC’s configuration.
4. When prompted with “Activate DHCP” dialog
box, click Yes.
5. Restart your computer.
3
2
9
Step 3d:
Configure the PC (TCP/IP settings)
for Windows 2000
1. Click on Start -> Settings -> Control Panel.
Double-click on the Network and Dial-up
Connections icon. The Network screen will
appear.
2. Select the Local Area Connection icon for
the applicable Ethernet adapter (usually it is
the first Local Area Connection listed).
Double-click on Local Area Connection and
click on Properties.
3. Select Internet Protocol (TCP/IP) and click
on Properties.
4. Select Obtain an IP address automatically
and click on OK on the subsequent screens
to complete the PC’s configuration.
5. Restart your computer.
4
3
2
10
Step 3e:
Configure the PC (TCP/IP settings)
for Windows XP
The following instructions assume you are running Windows XP’s default interface. If you are
using the Classical interface (where the icons and menus look like previous Windows ver-
sions), please follow the instructions for Windows 2000 (Step 3b).
1. Click on start -> Control Panel. Click on the
Network and Internet Connections icon.
Click on the Network Connections icon. The
Network screen will appear.
2. Select the Local Area Connection icon for
the applicable Ethernet adapter (usually it is
the first Local Area Connection listed).
Double-click on Local Area Connection and
click on Properties.
3. Select Internet Protocol (TCP/IP) and click
on Properties.
4. Select Obtain an IP address automatically
and click on OK on the subsequent screens
to
complete the PC’s configuration.
5. Restart your computer.
2
3
4
Altri manuali per C2-010
1
Indice
Altri manuali Siemens Modem
Siemens
Siemens TC35i Terminal Manuale utente
Siemens
Siemens SpeedStream 4100 Manuale utente
Siemens
Siemens Gigaset SX685 WiMAX Manuale utente
Siemens
Siemens Brodersen MC55 AT Istruzioni per l'installazione
Siemens
Siemens 1015N-2MFM-1A Manuale utente
Siemens
Siemens SE505 Manuale utente
Siemens
Siemens SE366 Manuale utente
Siemens
Siemens TC35 Manuale utente
Siemens
Siemens TC35i Terminal Manuale utente
Siemens
Siemens Gigaset USB Stick 54 Manuale utente
Siemens
Siemens Gigaset USB Stick 108 Manuale utente
Siemens
Siemens SINAUT ST7 Manuale utente
Siemens
Siemens MC35 Terminal Manuale utente
Siemens
Siemens EDGE Speed ES75 Manuale utente
Siemens
Siemens 7XV5655-0BB00 Manuale utente
Siemens
Siemens Gigaset USB Stick 108 Manuale utente
Siemens
Siemens SpeedStream 6101 Manuale utente
Siemens
Siemens SITRANS TK Manuale utente
Siemens
Siemens Insys 56k Manuale utente
Siemens
Siemens tc35it Istruzioni per il montaggio
