Siemens EDGE Speed ES75 Manuale utente
modem
EDGE Speed
ES75
Package
contents:
modem
power supply
antenna
USB cable
serial cable
Installation guide
2
EDGE Speed ES75 is a compact modem for data and SMS
transmission in GSM networks with the support of GPRS and EDGE
standards.
This short guide will show you how to connect and install the EDGE
Speed ES75 modem including programme for internet connection
and sending SMS. For more information see the user´s manual in
the PDF file (Acrobat Reader) in the enclosed CD.
Security principles for EDGE Speed ES75
•Switch the modem off when you are in a hospital or near medical
devices.
•Switch the ES75 modem off when flying. Secure it so that it
cannot be switched on inadvertently. Switch the modem off
when you are near petrol stations, fuel depots, chemical plants
or blasting operations. The modem can disturb the operation of
technical equipment.
•Do not use ES75 in bathrooms and showers.
•Prevent direct influence of heat sources such as heating
radiators and do not expose it to direct insolation.
•In order to avoid possible damage we recommend that you only
use specified accessories such as power supply and original
accessories.
EDGE Speed ES75 complies with relevant European Union
standards. Nevertheless, if sound and picture reception in your TV
set or radio should be affected, check the quality of shielding with
your TV set supplier.
The warranty does not apply in the event of improper use!
Operation system
•PC with min. Pentium 2, 350MHz
•minimum 64 MB RAM and 3 MB free on HD
•operation system Windows NT, 2000, XP
•free USB port version 1.1 / 2.0 or COM port
(USB connection is released for Windows XP)
•CD-ROM or DVD
3
Trade marks
Microsoft, Windows 98SE, Windows ME, Windows 2000, Windows
XP and Windows Explorer are registered trademarks of Microsoft
Corporation.
Installation
→Make sure that ES75 modem is not connected.
→Close all the running programmes.
→Insert the enclosed CD in the CD tray of your PC and wait until
the welcome screen appears. If it does not do so automatically,
start the installation manually:
−open Windows Explorer
−select CD-ROM drive and start the programme setup.exe.
→In the window select an interface via which you will connect the
ES75.
In the following screen in your PC select a directory for file
installation.
→Accept default set up or by means of Browse select another
directory and click on Next.
→When requested connect modem EGDE Speed ES75 to the
selected port of your computer.
After the connection of ES75 the window of the Windows wizard
will open for automatic detection of hardware and driver
installation.Follow its instructions - if you interrupt the installation
the driver cannot be installed correctly.
→After finishing the wizard by adding a new HW continue by
selecting Next.
→A window with the choice of components for the installation of
parts will appear. Choose Next.
→After successful installation finish the wizard by installing a new
HW by selecting Finish.
i If during the installation a window indicating a missing
electronic signature appears, ignore it and continue
the installation by selecting Next.
Possible problems during the installation
In very exceptional cases it might happen that the driver installation
will not be completed. It can be due to incorrect procedure during the
installation. In such a case stop the installation programme, keep the
ES75 modem connected to the computer and start the installation
again (this time do not disconnect ES75)
Checking successful installation
After restarting the computer the successful installation is indicated
by following specifications:
Menu Start contains new references:
Start>Programms>EDGESpeed ES75 USB>EDGESpeed ES75 USB
Start>Programms>EDGESpeed ES75 USB>Uninstall
or EDGESpeed ES75 for installation in COM port
An icon for starting the programme will appear in the screen.
Following items are added to the control panels:
in the Modems folder it is a new driver:
Siemens AG WM USB modem / EmemTModem
in the network connection: ES75USBConn / ES75Conn
Operation instructions
If it is not possible to connect, check your Firewall set-up.
If during the connection to the internet via USB speed of 38400 kbps
is displayed, it is only initial setting which does not affect the actual
data transmission speed in any way.
During data transmittion and surfing the net SW problem in your PC
(operation system drop-out, programmes mistakes) or a temporary
problem in data transmission in the net of the operator can
sometimes cause outage of ES75. In such a case disconnect and
connect to GPRS again.If this does not help, it is necessary to
disconnect and again connect USB cable or restart PC.
Customer care
For current information about the product see the webpages
http://ww.siemens.cz/wm
EDGE Speed ES75 is approved according to the essential directives R&TTE for operation
in the EC countries and Switzerland.
4
The declaration of conformity has been issued and can be obtained from
the above mentioned webpage.
Indice
Altri manuali Siemens Modem
Siemens
Siemens SINAUT ST7 Manuale utente
Siemens
Siemens C2-010 Manuale utente
Siemens
Siemens SINAUT MD720-3 Guida utente
Siemens
Siemens TC35 Manuale utente
Siemens
Siemens SE366 Manuale utente
Siemens
Siemens SpeedStream 4100 Manuale utente
Siemens
Siemens Gigaset SX685 WiMAX Manuale utente
Siemens
Siemens TC35i Terminal Manuale utente
Siemens
Siemens Orcon Homehub Manuale utente
Siemens
Siemens SITRANS TK Manuale utente
Siemens
Siemens APOGEE USR5686 Manuale utente
Siemens
Siemens 7XV5655-0BB00 Manuale utente
Siemens
Siemens Gigaset USB Stick 108 Manuale utente
Siemens
Siemens Gigaset USB Stick 54 Manuale utente
Siemens
Siemens Brodersen MC55 AT Istruzioni per l'installazione
Siemens
Siemens SINAUT MD720-3 Manuale utente
Siemens
Siemens Gigaset USB Stick 108 Manuale utente
Siemens
Siemens tc35it Istruzioni per il montaggio
Siemens
Siemens 7NG3092-8KU Manuale utente
Siemens
Siemens SIMATIC NET MODEM MD720 Guida utente
