Siemens FSD901-U2 Manuale utente

A6V10333726_c_en_--

2020-02-05 Smart Infrastructure

FSD901-U2/ FSD901-R2/ FSD901-U3/FSD901-R3

Floor Repeater Display

Product Manual

Overview

The floor repeater display is an indication and operation unit in a fire detection system

with the following functions:

Indication of events

Opera

tion

lAlarm

lTrouble

lSupervisory

lStatus

lScrolling through lists

lReset

lAcknowledge

lUnsilence

Silence

The display on the floor repeater terminal is synchronized with the fire control panel and

displays the same event texts.

Characteristic

lSmall floor repeater operating, and display panels applied in FC2005/FC901 fire

detection system

lLarge backlight LCD display(160X64)

lCommunication with controller via RS485 (individual addressing)

lAdditional 24 VDC power supply necessary

lIn total, up to 8 FSD can be connected to a fire control panel

lAccess control by key

lFlat, elegant housing

A6V10333726_c_en_-- 2

Function

lDisplay of alarms, troubles, supervisory and status event

lSame message layout as the fire control panel

lWith the navigation keys an indicated list in the display can be scrolled through

lThe internal buzzer can be switched off manually by pressing button “Acknowledge”

lReset events displayed on the FSD

lSilence and unsilence

Application

Fig.1 Front view

No. Name Function

LCD

Display of a

larms

trouble

, supervisory and s

tatus

Alarm

ight up

in case of fire

our

way button

or menu navigation

Power

Light up when power supply is normal

Trouble

Light up in case of

trouble event

Ground Fault

Light up in case of

round

ault event

Silenced

All activated silenceab

le devices are s

ilenced

Supervisory

Light up in case of

supervisory event

Audibles on

Light up when

NAC or silenceable device is activated

10.

Reset

Clear all events

11.

Acknowledge

unacknowledged events

12.

<Unsilence

All silenced d

evices are activated a

gain

13.

Silence

Silence all activated silenceable devices

14.

ock

Set user access level by key

User Level

FSD floor repeater display control access right through lock on door. There are two

user levels for access right:

User level Lock key position

The operation items for L0/L1 are listed as below:

Items

View

real time

events

√

cknowledge

√

Reset

√

Silence

√

Unsilence

√

Lamp test

√

A6V10333726_c_en_--

Operation

Task Operation

View real time events 1. Press "↓" / "↑" to navigate a real time event.

2. Press "←" to return to first event.

Lamp test Press both "Silence" and "Unsilence" button for 5s to do

lamp test.

Acknowledge or reset

events

Press "Acknowledge" or "RESET".

Unsilence devices

Press "Unsilence", all silenced devices are activated again.

Silence devices Press "Silence", silence all activated silenceable devices.

Address and Baud Rate

8-digit Dip-switch S1 is used for setting the FSD901 address and Baud Rate Setting.

The first 1-4 digits is for setting the FSD901 address 1-8, the 7-8 digits is for setting

RS485 communication baud rate. The 5 and 6 digits are reserved for future use.

Address

DIP switch

Baud Rate

DIP switch

Off

9600 bps

Off

19200

bps

Off

38400 bps

Off

115200 bps

Off

FC2005 and FC901 can only support 19200 bps, other options reserve for future usage.

EOL Resistor

2-digit Dip-switch S20 is used for setting EOL resistor of RS485.

1 and 2 On：Internal EOL resistor is connected

1 and 2 Off：Internal EOL resistor is disconnected

For RS485 Class A, loop mode, no EOL resistor is needed.

For RS485 Class B, stub mode, internal EOL resistor of the repeater display at the end

of RS485 must be connected.

Installation

Fig 2 Dimension (mm) Fig 3 Connection

Note:

·Point G is not used for any connection.

·Power in from the non-resettable auxiliary power output on

panel.

Issued by

Siemens Industry, Inc.

Smart Infrastructure

8 Fernwood Road

Florham Park, NJ 08932

Tel. +1 973-593-2600

www.sbt.s

iemens.com/FIS

©Siemens Industry, Inc., 2019

Technical specifications and availability subject to change without notice

Doc No. A6V10333726_c_en_-- 100935693 A5Q00041959

Fig 4

Fig 5

1. Insert the loop line and external power wire through the floor repeater display.

2. Mark the position for the 4 installation holes on flat wall (Fig. 2), drill the holes, put expansion bolts in and insert the

screws leaving a small gap for hanging the display.

3. Hang the floor repeater display over those screws through installation holes.

4. Open the front panel (Fig. 4/5), tighten the screws and make sure the display is fixed firmly.

5. Connect cables to terminals referring to the connection diagram (Fig. 3). Correctly set the internal 120ΩEOL

resistor referring to the section “EOL Resistor”.

6. Close the front panel.

FSD connects to separate power supply, which needs to be UL Listed for Fire Safety Use and Power

Limited.

Dimension (mm)

Technical data

Operating voltage 24 VDC nominal / 19…28 VDC

Operating current (quiescent) 60 mA

Activation current 70 mA

Operating temperature 0...+49 °C

Humidity ≤93% rel.

Communication protocol UFP (RS485-BUS)

Connection terminals 14-18 AWG

Color Black / Red

Operating location Indoor / dry

Details for ordering

Type

Material No.

Part No.

Designation

Weight

SD901

S54433

C102

100935670

Desigo

system

display

(

black

)

FSD901

S54433

C102

101061934

Desigo

system

display

(

red

)

FSD901

S54433

C102

101061935

Cerberus

system

display

(

)

FSD901

S54433

C102

100935673

Cerberus

system

display

(

red

)

Questo manuale è adatto per i seguenti modelli

Altri manuali Siemens Monitor

Siemens

Siemens SIMOMED HM Istruzioni operative

Siemens

Siemens SCD 1897-M Manuale

Siemens

Siemens SIMATIC HMI series Manuale utente

Siemens

Siemens CMCC1020 Manuale utente

Siemens

Siemens SCD 19101 D Manuale utente

Siemens

Siemens MCF 3501 T Manuale utente

Siemens

Siemens INOX PRO SIMATIC IFP1900 Manuale utente

Siemens

Siemens MCM-21T2 Manuale utente

Siemens

Siemens 3TK2810-1 Manuale utente

Siemens

Siemens SIMATIC Industrial Flat Panel IFP2200 Manuale utente

Siemens

Siemens CMTC1515 Manuale utente

Siemens

Siemens SSD Manuale utente

Siemens

Siemens SMD21300 Manuale utente

Siemens

Siemens INOX PRO SIMATIC IFP1900 Manuale utente

Siemens

Siemens DSP800 Manuale utente

Siemens

Siemens SCD 1597-E Manuale utente

Siemens

Siemens SIMATIC IPC477E 1900 PRO HD LR Ext. Manuale utente

Siemens

Siemens SITRANS RD200 Manuale utente

Siemens

Siemens SCD 1515-E Manuale utente

Siemens

Siemens 43B1-M Manuale utente

Siemens

Siemens SYSCON1 Manuale utente

Siemens

Siemens SCD 1898-I Manuale utente

Siemens

Siemens SISTORE AX9 Manuale utente

Siemens

Siemens FT2011 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione