Siemens FT2015 Manuale utente
A6V10333444_a_en_US Siemens Industry, Inc.
01/18/2012 Building Technologies Division
FT2015
Remote terminal
Operation Manual
MP-UL 1.0
Legal notice
2
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
Legal notice
Technical specifications and availability subject to change without notice.
© 2012 Copyright by Siemens Industry, Inc.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages. All
rights created by patent grant or registration of a utility model or design patent are
reserved.
Issued by:
Siemens Industry, Inc.
Building Technologies Division
8 Fernwood Road
Florham Park, NJ 07932
Tel. +1 973-593-2600
www.sbt.siemens.com/FIS
Edition: 01/18/2012
Document ID: A6V10333444_a_en_US
3
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
Table of contents
1About this document .........................................................................................4
1.1 Applicable documents ..........................................................................................5
1.2 Technical terms ....................................................................................................5
1.3 History of changes................................................................................................5
1.4 How displays are represented in the document...................................................6
2Features ..............................................................................................................7
2.1 Maximum number of events which can be displayed ..........................................7
3PMI .......................................................................................................................8
3.1 Buttons on the PMI...............................................................................................8
3.2 Display..................................................................................................................9
3.3 Key switch ............................................................................................................9
4Operation ..........................................................................................................10
4.1 ALARM Procedure .............................................................................................10
4.2 Reset an alarm ...................................................................................................11
4.3 Procedure in case of trouble ..............................................................................11
4.4 Display and scroll through lists...........................................................................12
4.4.1 Show ALARM list ................................................................................12
5Maintenance......................................................................................................13
About this document
1
A
pplicable documents
4
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
1About this document
Goal and purpose
This document describes the operation of the remote terminal FT2015 in a fire
detection system. The reader shall become familiar with the possible indications and
operating functions on the terminal, as well as with the functionality of the terminal in
the overall system. This allows the reader to respond appropriately in the event of fire
or trouble.
Scope
This document applies to the remote terminal FT2015, Market package MP-UL 1.0.
Target groups
The information in this document is intended for the following target groups:
Target group Activity Recommended qualification
Operating personnel Carries out procedures to correctly
operate the product.
No particular basic training is needed.
Has been instructed by the commissioning
personnel.
Commissioning personnel Configures the product at the place of
installation according to customer-
specific requirements.
Checks the product operability and
releases the product for use by the
operator.
Searches for and corrects malfunctions.
Has obtained suitable specialist training
for the function and for the products.
Has attended the training courses for
commissioning personnel.
Maintenance personnel Carries out all maintenance work.
Checks that the products are in perfect
working order.
Searches for and corrects malfunctions.
Has obtained suitable specialist training
for the function and for the products.
Document identification
The document ID is structured as follows:
ID_ModificationIndex_Language_COUNTRY
Example: A6V10315023_a_en_US
About this document
A
pplicable documents 1
5
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
Conventions for text marking
Markups
Special markups are shown in this document as follows:
⊳ Requirement for a behavior instruction
⇨ Intermediate result of a behavior instruction
⇨ End result of a behavior instruction
[➙ X] Reference to a page number
'Text' Quotation, reproduced identically
<Key> Identification of keys
Supplementary information and tips
The 'i' symbol identifies supplementary information and tips for an easier way of
working.
1.1 Applicable documents
Document ID Title
A6V10333401 System description
A6V10333396 Planning
A6V10333423 Configuration
A6V10333434 Commissioning / Maintenance / Troubleshooting
A6V10333421 Inscription strips
A6V10356958 Fire Alarm Control Panel, Installation Instructions
1.2 Technical terms
You will find technical terms and explanations for them in document A6V10333401, in
the 'Glossary' chapter. See chapter 'Applicable documents'.
1.3 History of changes
The table below shows this document's history of changes:
Modification index Edition date Brief description
a 01.2012 First edition MP-UL 1.0
About this document
1 How displays are represented in the document
6
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
1.4 How displays are represented in the document
In the document, the display is sometimes shown in tables.
Deviations between the original and the tables are indicated by means of the examples
below:
07:55:31ABCDE FGHI
ABCD: 3
!ABCD: 421 ABC: 32 XXX YYY ZZZ
ABCDEFGHI AAA/BBB 3
ABCD: 026 ABC: 75 XXX YYY ZZZ
ABCDE CCC 2
Original display figure
ABCDE FGHI
ABCD: 3
07:55:31
! ABCD: 421 ABC: 32
ABCDEFGHI AAA/BBB
_______________________________________
+ ABCD: 026 ABC: 75
ABCDE CCC
–––––––––––––––––––––––––––––––––––––––
XXX YYY ZZZ
3
____________________________________
XXX YYY ZZZ
2
––––––––––––––––––––––––––––––––––––
Display figure in tables
The table representation has the following key deviations from the
original:
Font and representation (proportional font, not inverted)
No frame around selection
Features
Maximum number of events which can be displayed 2
7
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
2Features
The remote terminal is an indicator and operating unit in a fire detection installation
with the following functions:
Indication of events
'ALARM'
– 'Pre-ALARM'
'Trouble'
'Bypassed'
'Supervisory'
Operation
Silence buzzer
Acknowledge and reset alarms and troubles
Three buttons configurable with the Engineering tool set.
The display on the remote terminal is synchronized with 'Panels' of the configured
visibility and displays the same event texts.
There is a limit on the number of events which can be displayed. You will find details
of this in the corresponding chapter.
See also
Maximum number of events which can be displayed [➙ 7]
2.1 Maximum number of events which can be displayed
The maximum number of events which can be displayed is limited as follows and
depends on the event text length:
Display representation Max. number (long event texts)
'Extended view' 18
'Standard view ' 37
Events are displayed by priority. Once the maximum number of events which can be
displayed is reached, events of a higher priority take the place of those of a lower
priority in the display.
Events which are no longer displayed due to this limit can be listed in full on the
control panel.
See also
Display and scroll through lists [➙ 12]
PMI
3 Buttons on the PMI
8
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
3PMI
The following figure shows the Person Machine Interface of a remote terminal.
Person Machine Interface of remote terminal
1 Navigation buttons
3.1 Buttons on the PMI
Navigation buttons
The navigation buttons work in the same way as the arrow keys on a PC keyboard.
With the <▲> and <▼> buttons, the next entry in a list can be scrolled to.
<Audibles ON/Silenced>
Deactivates the buzzer.
PMI
Display 3
9
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
<Acknowledge>
Confirms all acknowledgeable 'Events'.
Confirms presence ('AVC', 'IC').
Deactivates the buzzer.
<Reset>
Resets all 'Events' which can be reset.
Configurable buttons
You can assign e.g. the following functions to the configurable buttons:
'Bypass and enable Zones'
Switch test mode on and off
Activate and deactivate alarm indicator
3.2 Display
The display has two areas:
07:55:31ABCDE FGHI
ABCD: 3
ABCD: 421 ABC: 32 XXX YYY ZZZ
ABCDEFGHI AAA/BBB
ABCD: 026 ABC: 75 XXX YYY ZZZ
ABCDE CCC
1
2
Display depiction with two messages displayed
1 Header 2 Depiction area
3.3 Key switch
You can use the key switch to release operation.
The key switch has two positions:
ON (horizontal position)
OFF (vertical position)
Operation
4
A
LARM Procedure
10
Siemens Industry, Inc. A6V10333444_a_en_US
Building Technologies Division 01/18/2012
4Operation
4.1 ALARM Procedure
If your fire detection system does not have delayed alarm transmission ('AVC'), the –
'Fire Department in' 'mm:ss' variant doesn't apply to step 2 (see Procedure in the
event of alarm).
Procedure in the event of alarm
Step Action / Condition Consequence / Status
1 <Press <Acknowledge> on the Person
Machine Interface
'AVC' starts count-down t2 to investigate the
'ALARM' source
2 Read top line on display
– 'Fire Department requested' 'ALARM' is transmitted to the fire department
– 'Fire Department in' 'mm:ss' 'ALARM' is transmitted to fire department in 'mm:ss'
Remaining time is shown as Count-down
– 'Call Fire Department !'
When:
Remote transmission switched off
Remote transmission blocked or defective
No remote transmission available
Fire department must be called by phone!
No automatic transmission to fire department
3 Read off fire location in display
4 Go to the fire location
5 Decide: MAJOR INCIDENT or minor incident
Condition MAJOR INCIDENT Minor incident
Fire department has been called Save people
Guide the fire department to the fire
location
Fight the fire
Try to prevent the fire
department from being deployed
<Press Reset>
'Fire Department in' 'mm:ss'
Count-down runs
Activate 'Manual pull station'
immediately
<Press Reset>
'Call Fire Department !'
No automatic transmission to the
fire department
Call the fire department on the phone! <Press Reset>
To reset, the key switch must be activated.
The room may have to be vented before a reset is possible.
Elements which cannot be reset can be temporarily bypassed on the control panel.
Altri manuali per FT2015
1
Indice
Altri manuali Siemens Terminale touch
Siemens
Siemens SIMATIC HMI IPC477C PRO Manuale utente
Siemens
Siemens 3VT9100-4TC30 Manuale utente
Siemens
Siemens Climatix HMI-DM Manuale dell'operatore
Siemens
Siemens 3VT9100-4TA30 Manuale utente
Siemens
Siemens 3VL9400-8BH01 Manuale utente
Siemens
Siemens A5E01621433-01 Manuale utente
Siemens
Siemens Cerberus PACE Manuale utente
Siemens
Siemens Gigaset M1 professional Manuale utente
Siemens
Siemens VT9324-4TD30 Manuale utente
Siemens
Siemens SIMATIC NET Manuale utente
Siemens
Siemens FTI2001-U1 Manuale utente
Siemens
Siemens FT2010 Manuale utente
Siemens
Siemens 3VM9 0-0WC00 Series Manuale utente
Siemens
Siemens 3UF1900-1KA00 Manuale utente
Siemens
Siemens 3VT9203-4TF30 Manuale utente
Siemens
Siemens 3VF 6 Manuale utente
Siemens
Siemens 3VT9400-4RC30 Manuale utente
Siemens
Siemens 3VL9400-4RA00 Manuale utente
Siemens
Siemens AlgoPilot B3Q661 Manuale utente
Siemens
Siemens 3TA2JG600PT Manuale utente
