SIGMA TEK TAE 1044 Manuale utente

TAE 1044

Build-in Touch Terminal

Operating Manual

| Date of creation: 03.06.2020

| Version date: 11.11.2020

| Article number: 12-200-1044-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation from German

(print, photocopy, microfilm or in any other process) without express permission.

We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible for technical or

printing errors in this handbook and assumes no responsibility for damages that occur through its use.

BUILD-IN TOUCH TERMINAL

TAE 1044

11.11.2020

Page 1

Build-in Touch Terminal

TAE 1044

The multi-touch operating panel TAE 1044 is used to visualize automated processes. The

operation and monitoring of automated procedures are simplified using this display unit. The

projective capacitive touch screen is used to enter process data and parameters. The output

is shown on a 10.1“ TFT color display with LED backlighting.

This module operates with SIGMATEK HMI-LINK generation 2.1 (G2.1). This allows a

transmission from the display, as well as USB signals using standard cables (CAT-5e or CAT-

6) from a remote PC to a terminal (up to 100 m).

Currently supported: PC 452-K, HMI-Link G2 insert (PC 301-E7) and HMI-Link G2 Box (PC

301-E8). A device equipped with a generation 2.1 SIGMATEK HMI-Link (G2.1) is also required

on the PC side; either integrated directly on the PC or as an external expansion box. With the

2 integrated USB connection, external end devices (mouse, keyboard ...) or memory (USB

stick) can be connection on the HMI side.

TAE 1044

BUILD-IN TOUCH TERMINAL

Page 2

11.11.2020

Table of Contents

TAE 1044..................................................................1

Build-in Touch Terminal.........................................1

Table of Contents ...................................................2

Introduction.............................................................6

Target Group/Purpose of this Operating Manual ...6

Important Reference Documentation .....................6

Contents of Delivery ..............................................6

Basic Safety Guidelines.........................................7

Symbols Used ........................................................7

Disclaimer ..............................................................8

General Safety Guidelines .....................................9

Standards and Guidelines....................................11

Guidelines ............................................................ 11

EU Conformity Declaration ............................... 11

Technical Data ......................................................12

Performance Data ................................................ 12

Electrical Requirements ....................................... 12

Display ................................................................. 13

Control Unit .......................................................... 14

BUILD-IN TOUCH TERMINAL

TAE 1044

11.11.2020

Page 3

Minimum Distance between Operating Elements for Multi-touch

Applications ......................................................... 15

Environmental Conditions ................................... 16

Miscellaneous ..................................................... 17

Interfaces..............................................................18

Front Connectors ................................................ 18

X1: Supply (4-pin Phoenix RM 3.5) .................. 18

X2: HMI Remote-IN (HMI-Link G2.1, Industrial Mini I/O) 19

X3: Service ....................................................... 19

X4, X5: USB 2.0 (Type A) ................................ 20

X6: Panel Interface Connector ......................... 20

Applicable Connectors ........................................ 21

Status Display LEDs............................................ 22

Mechanical Dimensions.......................................23

Assembly/Installation ..........................................26

Check Contents of Delivery ................................. 26

Installation ........................................................... 26

Mounting Instructions .......................................... 26

Restricted Space Around Rear Trimming ......... 27

Required Cutout for Mounting the Terminal ..... 28

Mounting Position ............................................. 29

TAE 1044

BUILD-IN TOUCH TERMINAL

Page 4

11.11.2020

Wiring ....................................................................30

Grounding ............................................................ 30

Shielding .............................................................. 30

ESD Protection .................................................... 31

USB Interface ...................................................... 31

Transport/Storage.................................................32

Storage ..................................................................33

Maintenance..........................................................34

Cleaning and Disinfecting the Touch Screen ....... 34

Service ................................................................. 35

Calibrating the Touch Screen ........................... 35

Repair .................................................................. 36

Position Series Label Sub Device ........................ 36

Modularity..............................................................37

Removing the PIM from the Touch Panel ............ 37

Mounting the PIM onto the Touch Panel .............. 38

Display „Burn-In“ Effect.......................................39

Disposal.................................................................40

Accessories...........................................................41

Touch Pen ........................................................... 41

Changes Chart......................................................42

BUILD-IN TOUCH TERMINAL

TAE 1044

11.11.2020

Page 5

TAE 1044

BUILD-IN TOUCH TERMINAL

Page 6

11.11.2020

Introduction

Target Group/Purpose of this Operating Manual

This operating manual contains all information required for the operation of the product.

This operating manual is intended for:

• Project planners

• Technicians

• Commissioning engineers

• Machine operators

• Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found

on our website www.sigmatek-automation.com.

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

Important Reference Documentation

• TP XX61

• PIM 021

This and additional documents can be downloaded from our website or obtained through

support.

Contents of Delivery

1x TAE 1044

8x angle bracket

1x 4-pin Phoenix connector plug

2x M3 TX10 Torx screws

BUILD-IN TOUCH TERMINAL

TAE 1044

11.11.2020

Page 7

Basic Safety Guidelines

Symbols Used

The following symbols are used in the operator documentation for warning and danger

messages, as well as informational notes.

DANGER

Danger indicates that death or serious injury will occur, if the

specified measures are not taken.

• To avoid death or serious injuries, observe the all guidelines.

Danger indique une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

• Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

WARNING

Warning indicates that death or serious injury can occur, if the

specified measures are not taken.

• To avoid death or serious injuries, observe the all guidelines.

Avertissement d’une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

• Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

CAUTION

Caution indicates that moderate to slight injury can occur, if the

specified measures are not taken.

• To avoid moderate to slight injuries, observe the all guidelines.

Attention indique une situation dangereuse qui, faute de prendre les

mesures adéquates, peut entraîner des blessures assez graves ou

légères.

• Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

CAUTION

TAE 1044

BUILD-IN TOUCH TERMINAL

Page 8

11.11.2020

Danger for ESD-sensitive components.

Les signes de danger pour les composants sensibles aux décharges

électrostatiques.

INFORMATION

• Provides important information on the product, handling or

relevant sections of the documentation, which require particular

attention.

Disclaimer

INFORMATION

The contents of this operating manual were prepared with the greatest

care. However, deviations cannot be ruled out. This operating manual is

regularly checked and required corrections are included in the subsequent

versions. The machine manufacturer is responsible for the proper

assembly, as well as device configuration. The machine operator is

responsible for safe handling, as well as proper operation.

The current operating manual can be found on our website. If necessary,

contact our support.

Subject to technical changes, which improve the performance of the

devices. The following operating manual is purely a product description. It

does not guarantee properties under the warranty.

Please thoroughly read the corresponding documents and this operating

manual before handling a product.

SIGMATEK GmbH & Co KG is not liable for damages caused through,

non-compliance with these instructions or applicable regulations.

Indice

Altri manuali SIGMA TEK Terminale touch

SIGMA TEK

SIGMA TEK ETT 7321 Manuale utente

SIGMA TEK

SIGMA TEK ETT 775 Manuale utente

SIGMA TEK

SIGMA TEK ETT 2154-W Manuale utente

SIGMA TEK

SIGMA TEK ETT 2144 Manuale utente

SIGMA TEK

SIGMA TEK ETT 2144-W Manuale utente

SIGMA TEK

SIGMA TEK TAE 2144 Manuale utente

SIGMA TEK

SIGMA TEK TAE 1244 Manuale utente

SIGMA TEK

SIGMA TEK HBG 1012 Manuale utente

SIGMA TEK

SIGMA TEK ETT 731 Manuale utente

SIGMA TEK

SIGMA TEK ETT 1244 Manuale utente

SIGMA TEK

SIGMA TEK ETT 1834 Manuale utente

SIGMA TEK

SIGMA TEK ETT 1034 Manuale utente

SIGMA TEK

SIGMA TEK ETT 1844 Manuale utente

SIGMA TEK

SIGMA TEK HZS 772 Manuale utente

SIGMA TEK

SIGMA TEK ETT 1544 Manuale utente

SIGMA TEK

SIGMA TEK ETT 736 Manuale utente

SIGMA TEK

SIGMA TEK ETT 2134 Manuale utente

SIGMA TEK

SIGMA TEK ETT 771 Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente