Silk'n Flash&Go Manuale utente
1
Instructions For Use
Instructions pour
l’utilisation
2
Note! Silk’n Flash&Go™ may not be effective on naturally
.white and light hair
Silk’n Flash&Go™ is a powerful device.As such,it should be
.used with special attention to safety
Do not use Silk’n Flash&Go™ on naturally
!dark skin
! Not Safe
Do not use Silk’n Flash&Go™ on tanned skin or
!after recent sun exposure
!Keep away from your eyes
Applying a Silk’n Flash&Go™ pulse to the eyes can
.cause eye injury
Please read all warnings and safety precautions
before use, and strictly follow them when using
!™Silk’n Flash&Go
3
Quick Start
Plan your Silk’n Flash&Go hair removal for
best results!
Treatments 1-4 – plan two weeks apart
Treatments 5-7 – plan four weeks apart
Treatments 8 + – treat as needed, until desired results
are achieved.
Set up Silk’n Flash&Go!
1. Remove Silk’n Flash&Go™ HAIR REMOVAL UNIT
and other components from box.
2.Verify that the DISPOSABLE LAMP CARTRIDGE
is inserted properly at the tip of the device.
3. Plug the ADAPTOR cord into the Silk’n Flash&Go™
HAIR REMOVAL UNIT socket.
4. Plug the ADAPTOR into an electrical outlet. The
STAND BY INDICATOR LIGHT will turn on.
Your Silk’n Flash&Go™ is now ready to start.
4
Treat with Silk’n Flash&Go safely and properly!
5. Choose areas to treat that have not had recent
exposure to the sun.
6.The skin of the treatment areas should be shaved,
clean, dry and free of any powders, antiperspirants or
deodorants. Do not wax, pluck or tweeze the hair out.
Shaving is an important step to get the results you want!
7. Press the ON/STBY SWITCH. The POWER ON
INDICATOR LIGHT (orange) will turn on and a fan
sound (similar to the sound of a hairdryer) will start.
8.Approximately 3.5 seconds after pressing the ON/
STBY SWITCH, the READY INDICATOR LIGHT
(green) will turn on.The device is then ready for you
to trigger the first pulse at the lowest energy level.
9. If this is your first treatment - Choose the energy
level. Flash&Go offers 5 levels of energy from 1 (the
lowest) to 5 (the highest). To choose the right energy
level for your first treatment, test each treatment
area separately:
5
Place theTREATMENT SURFACE on the skin and
press the trigger to deliver one pulse.
If you did not experience abnormal discomfort
press the + button once and deliver one pulse on
a different spot at energy level 2.
Continue testing at increased energy levels until
you have reached the highest level that you feel
comfortable with. If within one hour you experience
no adverse effects,you can start your full treatment
at that energy level.
Repeat this test for each body part you intend
to treat.
10. Set the energy level. If the energy level should be
higher than the lowest, press the ENERGY LEVEL
SETTING BUTTONS using the “-“ or “+” to
respectively decrease or increase the energy level,
until the desired energy level is set and represented
by 3 energy level indicator lights (For details see
“Energy Level” chapter inside this user manual).
6
11.Apply theTREATMENT SURFACE to the skin,
making sure the skin is spread evenly and smoothly.
As soon as theTREATMENT SURFACE is in full
contact with the skin, the READY INDICATOR
LIGHT will start blinking.
12. Press the PULSE BUTTON.The device will first
determine the color of your skin.
If the color of the skin is light enough for safe
application, the device will flash a pulse of light onto
your skin, and the READY INDICATOR LIGHT will
turn off.
You will see a bright flash of light and simultaneously
hear a subtle pop sound, which is a normal noise for
the device. You will feel a mild sensation of warmth
and tingling.
Silk’n Flash&Go™ will immediately recharge for the
next pulse. After 3.5 seconds the READY
INDICATOR LIGHT will turn on again.
13. Remove theTREATMENT SURFACE from the
treated area of skin.
7
14. Move theTREATMENT SURFACE to another area
of skin. Use the pressure marks the device just made
on your skin to guide you for proper positioning
of the next pulse, avoiding both gaps and overlaps
between pulses.
If your skin blisters or burns,
STOP USE IMMEDIATELY!
Try to avoid overlapping pulses!
Warning: Do not treat the same area of skin
more than once per hair removal session!
Treating the same area of skin more than
once per session increases the likelihood of
adverse effects.
15. Repeat the process until the entire treatment area
is covered.
8
Copyright 2011 © Home Skinovations Ltd.All rights reserved.
Print date: May 2011
Home Skinovations Ltd. reserves the right to make changes to its products or specifications to improve performance,
reliability, or manufacturability. Information furnished by Home Skinovations Ltd. Is believed to be accurate and reliable
at the time of publication. However, Home Skinovations Ltd. assumes no responsibility for its use. No license is granted
by its implication or otherwise under any patent or patent rights of Home Skinovations Ltd.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical,
for any purpose, without the express written permission of Home Skinovations Ltd.
Data is subject to change without notification.
Home Skinovations Ltd. has patents and pending patent applications, trademarks, copyrights, or other intellectual
property rights covering subject matter in this document.The furnishing of this document does not give you any license
to these patents, trademarks, copyrights, or other intellectual property rights except as expressly provided in any
written agreement from Home Skinovations Ltd.
Specifications are subject to change without notice.
Home Skinovations Ltd.Tavor Building, ShaarYokneam POB 533,Yokneam 20692, ISRAEL www.silkn.com, [email protected]
Silk’n Flash&Go Intended Use....................................................................................................................... p.7
Everything there is to know about Flash&Go..................................................................................p.8
Silk’n Flash&Go device description................................................................................................................p.8
The disposable lamp cartridge.........................................................................................................................p.8
The skin color sensor..............................................................................................................................................p.9
Energy levels.............................................................................................................................................................p.10
What to expect.....................................................................................................................................................p.11
Possible side effects..............................................................................................................................................p.12
Plan your Flash&Go hair removal for best results!...................................................................... p.15
Get started!............................................................................................................................................................ p.16
Treat with Silk’n Flash&Go safely and properly!..............................................................................p.16
When Silk’n Flash&Go™ session has been completed............................................................. p.19
Skin care following hair removal session..............................................................................................p.20
To Replace a Disposable Lamp Cartridge..............................................................................................p.20
Safety with Silk’n Flash&Go..................................................................................................................... p.21
Troubleshooting................................................................................................................................................... p.29
Customer Service.............................................................................................................................................. p.30
Specifications.........................................................................................................................................................p.31
Labeling.................................................................................................................................................................... p.32
EC Declaration of Conformity................................................................................................................... p.33
Table of Contents
9
Before using Silk’n Flash&Go™ for the first time, please read this
User Manual in its entirety.
Pay particular attention to sections on device use procedures,
device operation, and after-use procedures.
We recommend you re-familiarize yourself with this User Manual
before each use of Silk’n Flash&Go™
Silk’n Flash&Go™ is a powerful electrical device. As such, it
should be used with special attention to safety.
Please read all warnings and safety precautions before use, and
strictly follow them when using Silk’n Flash&Go™.
Silk’n Flash&Go Intended Use
Silk’n Flash&Go is a light based device intended for the removal
of unwanted hair.
It was designed for safe ‘at-home’ use.
It will effect long term, or permanent body hair reduction
(permanent hair reduction is defined as a long-term stable
reduction in the number of hairs re-growing after a treatment
regime.)
Ideal body areas for Silk’n Flash&Go use include the underarms,
bikini line, arms, legs, face, back, shoulders and chest.
The Silk’n Flash&Go is not suitable for naturally dark skin tones,
tanned skin or after recent sun exposure.
Silk’n Flash&Go is not as effective on blonde, white or light hair.
10
Upon opening the Silk’n Flash&Go™
package, you will find the following
parts:
Silk’n Flash&Go™ Hair Removal Unit
An Electrical Adaptor
Extra Disposable Lamp Cartridge
This User’s Manual
An Instructional DVD
1
4
2
3
Everything there is to know about Flash&Go
Silk’n Flash&Go device description:
Your Silk’n Flash&Go consists of a HAIR
REMOVAL UNIT(1) with CONTROL PANEL
(2), PULSE BUTTON (3) and a DISPOSABLE
LAMP CARTRIDGE (4).
Disposable Lamp Cartridge
The Silk’n Flash&Go™
DISPOSABLE LAMP CARTRIDGE
can fire 1000
light pulses covering an area of 4 cm² with each pulse. Pulse intensity
is determined only according to the energy level setting of the
device.There is no decrease of energy during the usable lifetime of
the
LAMP CARTRIDGE
.
Indice
Lingue:
Altri manuali Silk'n Epilatore
Silk'n
Silk'n LadyShave Wet&Dry ND8001 Manuale utente
Silk'n
Silk'n BellaGlide Manuale utente
Silk'n
Silk'n H3103 Manuale utente
Silk'n
Silk'n LADYSHAVE Manuale utente
Silk'n
Silk'n Reveal H4201 Manuale utente
Silk'n
Silk'n CLEAR Manuale utente
Silk'n
Silk'n Infinity H3101 Manuale utente
Silk'n
Silk'n RF-501 Manuale utente
Silk'n
Silk'n SatinGlow H3301 Manuale utente
Silk'n
Silk'n JEWEL H3210 Manuale utente
