Sim-Lab VESA 75/100 Manuale utente
INTEGRATED MONITOR MOUNT TRIPLE VESA 75/100
VERSION 2.0
Last updated: 05-11-2021
INSTRUCTION MANUAL
2|2 12
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions
on assembly. This requires only a set of simple tools and some of your time. Please check the bill of
materials before starting (page 10) and make sure all the parts are delivered.
BEFORE YOU START:
Breaking tabs:
Sometimes tabs from corner brackets need to be broken off in
order to fit as instructed. Place a flathead screwdriver behind
the tab and tilt upwards.
Always make sure to point away from you while doing so.
To know when to do this, we will show the following
symbol next to the brackets.
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you
can see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle
the Slot-Nut in place.
5/6MM -+
Tools needed:
3|3 12
850MM
1X
Slot-Nut M8
(A17)
12X 2X
Slot-Nut M6
(A18)
A18
P1
A17
4|4 12
200MM
2X
Slot-Nut M8
8X
A17
P3
5|5 12
Corner
Bracket
4X
M8 X 16
8X
Washer M8
8X
A7
A11
A13
6|6 12
Corner Bracket
Cap
4X
Profile
End-Cap
4X
VESA M6 X 16
2X1X
A8
A9
A12
A4
7|7 12
BUILD 2X
Profile
End-Cap
2X
Slot-Nut M8
4X
500MM
1X 2X
Slot-Nut M6
(A18)
A18
A17
A9
P2
8|8 12
Pivot Plate
4X
M8 X 16
16X
VESA M6 X 16
(A12)
4X2X
Washer M8
16X
A11
A12
A13
A5
A4
9|9 12
A13
Monitor
Bracket
2X
M8 X 25
4X
Washer M8
4X
A6
A10
10 |10 12
PROFILE KIT
#Part QTY Note
P1 40X40 Length=850mm 1
P2 40X40 Length=500mm 2
P3 40X40 Length=200mm 2
HARDWARE KIT
A4 VESA bracket L-shape 3
A5 Pivot plate 4
A6 Integrated monitor bracket 2
A7 Corner bracket 40x40 4
A8 Corner bracket 40x40 cap 4
A9 Profile 40x40 end-cap 8
A10 Bolt M8 X 25 DIN 912 10
A11 Bolt M8 X 16 DIN 912 24
A12 Bolt M6 X 16 DIN 912 6
A13 Washer M8 DIN 125-A 36
A14 Screw Philips M4 X 16 DIN 7985 12 Extra
A15 Screw Philips M4 X 10 DIN 7985 12 Extra
A16 Spacer male/female M4 X 10 12 Extra
A17 Slot-Nut M8 34
A18 Slot-Nut M6 6
Disclaimer: for some entries on this list, we supply more than required as spare
materials. Don’t worry if you have some leftovers, this is intentional.
Altri manuali per VESA 75/100
1
Indice
Altri manuali Sim-Lab Rack e supporto
Sim-Lab
Sim-Lab WS-PRO Manuale utente
Sim-Lab
Sim-Lab VESA 75/100 Manuale utente
Sim-Lab
Sim-Lab GT1-EVO Manuale utente
Sim-Lab
Sim-Lab GT1-PRO Manuale utente
Sim-Lab
Sim-Lab EVO Manuale utente
Sim-Lab
Sim-Lab Vario Vesa SLA078 Manuale utente
Sim-Lab
Sim-Lab TR1/GT2 Manuale utente
Sim-Lab
Sim-Lab PODIUM BRACKET SET Manuale utente
Sim-Lab
Sim-Lab GT1-EVO Manuale utente
Sim-Lab
Sim-Lab X1-PRO Manuale utente
