Pocket Printer A6 User’s Guide
SiPix Technical Support www.sipix.com/support
7
Installing the Driver Software for the Pocket Printer A6 on a PC
Windows 98/98SE/ME
1. Insert the driver CD into your CD-ROM drive.
2. Go to START ÆSETTINGS ÆPRINTERS.
3. Double click on ADD PRINTER.
4. Click NEXT on the Add Printer Wizard.
5. Place the dot next to LOCAL PRINTER, and click NEXT.
6. Click the HAVE DISK button.
7. The copy files Window will say A:\ change this to D:\windows (“D” is
assumed to be your CD ROM drive letter, if this is not correct substitute
your CD ROM drive letter for “D”) then click OK.
8. This will find the Pocket Printer A6 on the next screen, make sure this is
highlighted, then click NEXT.
9. Choose COM 1 and click NEXT.
10. Click NEXT again.
11. The system will start installing the driver, and at this point you may be
prompted to put in your Windows 98 CD. If your computer did not come
with a Windows 98 CD then the cab files should be on your computer and
you most likely will not be prompted for these files.
12. At this point the driver is installed. The COM port should be configured to
allow for the printer to communicate correctly.
Windows 2000
1. Insert the Driver CD into the CD-ROM Drive of your computer.
2. Double-Click on the MY COMPUTER icon, followed by your CD ROM drive,
followed by the Windows 2000 folder.
3. Double-Click on SETUP.EXE.
4. Click NEXT when prompted (by the Wizard).
5. Select TYPE, leave DEFAULT as the setting, and click NEXT.
6. Click NEXT on the ADD PRINTER WIZARD.
7. Select LOCAL, and click NEXT.
8. Click NEXT at The Printer will not be Detected.
9. Highlight COM1 on the Select Printer Port screen, and click NEXT.
10. Select HAVE DISK.
11. Type D:\win2000 (where D is the letter indicating your CD Drive).
12. Select the Pocket Printer A6 when it’s displayed, and click NEXT.
13. Select NO when prompted to print a TEST PAGE.
14. Click NEXT.
15. Click FINISH.
