Siselectron SCI2323 Manuale utente
1
Table of Contents
1. Overview................................................................................................................................2
1.1 Features......................................................................................................................2
1.2 Package Contents .......................................................................................................3
1.3 Dimensions..................................................................................................................5
1.4 Connectors (Indoor Only).............................................................................................6
1.5 Function Cables (Outdoor Only) ..................................................................................7
2. Camera Cabling.....................................................................................................................8
2.1 Power Connection .......................................................................................................8
2.2 Ethernet Cable Connection..........................................................................................8
2.3 Alarm I/O Connection ..................................................................................................8
2.4 Waterproof Cable Connector (Outdoor Only)...............................................................9
3. System Requirements ........................................................................................................11
4. Access Camera ...................................................................................................................12
5. Setup Video Resolution......................................................................................................18
6. Configuration Files Export / Import ...................................................................................19
7. Tech Support Information ..................................................................................................20
7.1 Delete the Existing Viewer.........................................................................................20
7.2 Setup Internet Security..............................................................................................21
Appendix: Technical Specifications
2
1. Overview
The Hyper Mini Dome IP Camera is an easy setup camera with PoE supported
to reduce complicated cabling without sacrificing performance. Quad Streams
Compression (H.264 Baseline / Main / High Profile / SVC + MJPEG) are
supported for efficient bandwidth and storage management. Up to 4K2K real
time resolution is offered for providing high definition images. Also, the H.264
encoder performance can be up to 1080p at 60 fps. For dark environments, the
camera has incorporated WDR, 3DNR and Day/Night ICR technologies to
capture clear images in lowlight conditions.
1.1 Features
Sony Progressive Scan CMOS 3M / 4M / 6M / 8M Sensor
Low Latency Streaming
Low Power Consumption on Encoding
Quad Codec Support-
H.264 Baseline / Main Profile / High Profile / SVC + MJPEG
Quad Streams Support
Smart Event Function-
Motion Detection / Network Failure Detection / Tampering Alarm / Periodical
Event / Manual Trigger Event / Audio Detection
Text Overlay and Privacy Masks
3D Motion Compensated Noise Reduction (MCTF)
True Day / Night Function (ICR)
IR LED Module support (working distance up to 40m)*
Weatherproof (IP66 International)*
64GB micro SD Card support
ONVIF Profile S Support
(*) Optional
3
1.2 Package Contents
Please check the package containing the following items listed below.
Indoor
Hyper Mini Dome IP Camera
2-Pin Power Terminal Block
Self-Tapping Screw (x3)
Plastic Screw Anchor (x3)
Quick Guide
CD
(bundled software and documentation)
NOTE: The supplied self-tapping screws are for soft substances /
materials such as wood. For other installation environments such as
cement wall, it is required to pre-drill and use plastic anchors before
fastening the supplied self-tapping screws on the wall.
4
Outdoor
Hyper Mini Dome IP Camera
Rubber Washer (x2)
Security Torx
Self-Tapping Screw (x3)
Plastic Screw Anchor (x3)
2-Pin Power Terminal Block
4-Pin Alarm I/O Terminal Block
Quick Guide
CD
(bundled software and documentation)
NOTE: The supplied self-tapping screws are for soft substances /
materials such as wood. For other installation environments such as
cement wall, it is required to pre-drill and use plastic anchors before
fastening the supplied self-tapping screws on the wall.
5
1.3 Dimensions
The dimensions of the camera are shown below.
Indoor
Outdoor
6
1.4 Connectors (Indoor Only)
The diagram below shows the default button and various connectors of the
camera. Definition for each connector is given as follows.
No.
Connector
Pin
Definition
Remarks
1
RJ-45
-
For network and PoE connections
2
Power
(DC 12V / AC 24V)
1
AC 24V 1
DC 12V
Power
connection
2
AC 24V 2
GND
3
microSD Card Slot
-
Insert the microSD card into the card slot to store
videos and snapshots. Do not remove the microSD
card when the camera is powered on.
4
BNC*
-
For analog video output
5
Alarm & Audio I/O
1
Alarm In –
Alarm
connection
2
Alarm In +
3
Alarm Out –
4
Alarm Out +
5
Audio Out R
Audio Out
6
Audio Out L
7
GND
8
Audio In
6
Default Button
-
Press the button with a proper tool for at least 20
seconds to restore the system.
(*) Optional. Please contact the manufacturer for the compatible BNC cable.
NOTE: It is not recommended to record with the microSD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the microSD card for
information regarding reliability and life expectancy.
7
1.5 Function Cables (Outdoor Only)
No.
Connector
Pin
Definition
Remarks
1
RJ-45
-
For network and PoE connection
2
Power*
(DC 12V / AC 24V)
1
DC 12V 1 / AC 24V 1
Power
connection
2
DC 12V 2 / AC 24V 2
3
Audio I/O*
Pink
Audio In
Two-way audio
transmission
Green
Audio Out
4
BNC*
-
For analog video output
5
Alarm I/O*
1
Alarm In –
2
Alarm In +
3
Alarm Out –
4
Alarm Out +
-
Default Button
-
For the position of the default button, please
refer to the diagram shown in section
Connectors (Indoor Only).
-
microSD Card Slot
-
For the position of the microSD card slot,
please refer to the diagram shown in section
Connectors (Indoor Only).
(*) Optional
8
2. Camera Cabling
Before users connect cables, make sure that all cables and the power adaptor
are placed in dry and well-waterproofed environments, e.g. waterproof boxes.
The purpose is to prevent moisture accumulation inside the camera and
moisture penetration into cables, which might lead to camera breakdown.
Please refer to the following sections for camera connection.
2.1 Power Connection
For power connection, please refer to section Connectors (Indoor Only) for
indoor models, and see section Function Cables (Outdoor Only) for outdoor
models. Alternatively, users can power the camera by PoE if a Power Sourcing
Equipment (PSE) switch is available. Please refer to the section below for
Ethernet cable connection.
NOTE: If PoE is used, make sure PSE is in use in the network.
2.2 Ethernet Cable Connection
For best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet cable to the RJ-45 connector of the camera /
function cable, and plug the other end of the cable to the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed when
connecting the IP camera directly to the PC.
Check the status of the link indicator and the activity indicator LEDs. If the LEDs
are unlit, please check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
2.3 Alarm I/O Connection
For indoor models, connect alarm devices to the first 4 pins of the camera’s
8-pin terminal block. For outdoor models, connect alarm devices to the 4-pin
terminal block of the All-in-One cable. Refer to sections Connectors (Indoor
Only) and Function Cables (Outdoor Only) for the pin definitions.
9
2.4 Waterproof Cable Connector (Outdoor Only)
Follow the instruction below to waterproof the connectors of different types of
cables. The supported cables are as shown below.
All-in-One Cable
RJ-45 Cable
IP66 RJ-45 Cable
All-in-One Cable
Follow the steps below to waterproof the connectors of the All-in-One cable.
Step 1:
Plug the cables to the connectors of the
All-in-One cable and coat the joints with
silicone gel. There should be no gap between
the connectors and the cables. For alarm I/O
connector and power connector, make sure
the side with wires attached is also sealed
with silicone gel.
Step 2:
Seal the end of the rubber coating of the
All-in-One cable as indicated in the figure on
the right. Please use enough silicone gel to
fill in the hose and wrap around each wire;
otherwise, waterproof function cannot be
guaranteed.
Indice
