SJE Rhombus IFS Manuale utente

SILENCE

/TEST

DISPLAY

EXP.

TB 1 P1

1 2 3 4 5 6

T2 RUN T1 T2 RUN

L1 L2

AUX

24VDC

ALARM

HORN

STATUS

IN IN2 IN3 IN4

Installer Friendly Series®

SJE RHOMBUS®Type IFS

Operation Manual

Technical support: +1-800-746-6287

[email protected]

www.sjerhombus.com

Technical Support Hours: Monday-Friday, 7 A.M. to 6 P.M. Central Time

TABLE OF CONTENTS

Warnings.................................................................................................. 1

Introduction and Specifications...................................................... 2

Main Screen (Programming) ............................................................. 3

User Interface....................................................................................... 3

Main Menu .............................................................................................. 4

HAND/OFF/AUTO Operation .............................................................10

Clearing Counts and ETMs ...............................................................11

Alarms.....................................................................................................12

Troubleshooting Information Screens .........................................13

I/O Tables...............................................................................................17

Mounting Dimensions ........................................................................18

Controller Dimensions .......................................................................18

Schematic Example............................................................................19

SJE Rhombus® Type IFS Operation Manual

WARNINGS

Failure to read and understand the information provided in this manual may result in personal injury

or death, damage to the product or product failure. Please read each section in its entirety and be

sure you understand the information provided in the section and related sections before attempting

any of the procedures or operations given.

Failure to follow these precautions could result in serious injury or death.

Keep these instructions with warranty after installation. This product must

be installed in accordance with National Electrical Code, ANSI/NFPA 70 so

as to prevent moisture from entering or accumulating within the controller

housing.

ELECTRICAL SHOCK HAZARD

A qualified service person must install and service this product

according to applicable codes and electrical schematics.

Disconnect power prior to servicing any equipment.

EXPLOSION OR FIRE HAZARD

Do not use this product with flammable liquids. Do not install

in hazardous locations as defined by National Electrical Code,

ANSI/NFPA 70.

• Do not connect power to this equipment if it has been damaged or has

any missing parts.

• Do not install in areas with: excessive or conductive dust, corrosive or

flammable gas, moisture or rain, excessive heat, regular impact shocks,

or excessive vibration.

SJE Rhombus® 1 Type IFS Operation Manual

Warning: Users must read this manual and understand controller operation before changing any settings. Entering

incorrect settings may result in damage to equipment.

If the controller was shipped pre-installed in a control panel, some default values may have been changed at the

factory in order to properly test the control panel operation. The user must adjust the settings to the requirements

of the installation.

The user should always keep a record of the settings before making changes, in case there is a need to revert to

previous settings. The user should also record all settings changed for use in programming a new controller in case

a replacement is ever needed.

Always thoroughly test controller operation in the installed configuration to verify user settings.

INTRODUCTION & SPECIFICATIONS

Congratulations and thank you for your purchase of a control panel utilizing the Installer Friendly

Series®controller. This manual explains the features and operations of the controller which

was designed to operate up to two pumps for tank pump down applications. The controller

automatically controls the operation of the pump(s) based on the status of float switches or

C-Level™ sensor.

GENERAL

• One or two pump level controller

• Operates using float switches or C-Level™

sensor

• HMI - Rotary selector for menu navigation

and editing settings

• HMI - High-Brightness 2.4” color graphic LCD

display, 240X320 pixel resolution

PUMP CONTROL AND PROTECTION

• Automatic pump alternation (duplex)

• Multiple alternation configurations

• Automatic alternation on pump fault

• Pump run indication

• 1-2 Pump power relays, 240 Vac, 20A max.

SYSTEM

• Alarm counts

• Pump cycle counts

• Pump run time

ELECTRICAL SPECIFICATIONS

• Universal 85-265 Vac, 50/60Hz

Control/Alarm power input

• 0-250 Vac, 50/60Hz, 20A max. Pump Power

input

• 5kA short circuit current rating

• 24 Vdc, class 2 control power

• Auxiliary Power -- 24 Vdc, 100mA max.

DEDICATED I/Os

• 4 Float switch inputs

• C-Level™ sensor with 2 backup floats

• 1 Auxiliary alarm input

• 2 Pump OL/thermal cutout inputs

• 1 Test/Silence/Manual alarm reset input

• 1 Alarm beacon output, 24 Vdc, 60mA max.

• 1 Alarm horn output, 24 Vdc, 30mA max.

COMMUNICATION

• Dedicated display communication port

(RJ45), RS485, Modbus protocol.

• Expansion communication port (RJ45),

RS485, Modbus protocol

ENVIRONMENT

• Operational temperature -20ºF to 122ºF

(-30ºC to 50ºC)

• Storage temperature -40ºF to 140ºF

(-40ºC to 60ºC)

• Relative Humidity (RH) 5% to 95%

(non-condensing)

• Indoor rated - for indoor use or mounted inside

of an outdoor rated enclosure

SJE Rhombus® 2 Type IFS Operation Manual

PROGRAMMING

HMI MAIN SCREEN

The main screen shows an overview of the system status including any active alarms.

Timed Dose Operation

(ON/OFF Timer Status)

USER INTERFACE

SJE Rhombus® 3 Type IFS Operation Manual

Pump HAND/OFF/AUTO

Status/Selection

Pump Hour Meter (selectable)

Settings Menu

Graphical Setpoint Bars (C-Level™)

Level Bar Graph or Float Status

Tank Level (C-Level™)

Color Liquid Crystal Display (LCD)

Menu Navigation

And ENTER Dial

Graphical Timer Count Down

(indicated on lead pump)

Pump Cycle Counts (selectable)

Pump Amps

(selectable - not shown)

MAIN MENU

ROTATE

Counts and ETMs

- Displays pump run time, pump run

counts and alarm counts

Timer Settings (timed dose mode only)

- Congures timers for timed dose

operation

Level Settings

- Congures level setpoints

Alternation (duplex only)

- Congures alternation mode for

duplex panels

Advanced

- Congures advanced functions and

accesses troubleshooting tools

Back

- Exits the Main Menu

SJE Rhombus® 4 Type IFS Operation Manual

SJE Rhombus® 5 Type IFS Operation Manual

Main Menu

Counts and ETM’s

ETM HH:MM:SS

Pump 1 00:00:00

Pump 2 * 00:00:00

Cycles

Pump 1 0000

Pump 2 * 0000

Counts

High Alarm 0

Pump 1 Fault 0

Pump 2 Fault* 0

Pump 1 Overload 0

Pump 2 Overload* 0

Pump 1 Thermal 0

Pump 2 Thermal* 0

Pump 1 Seal 0

Pump 2 Seal

Sensor Fail

* 0

Back

*visible only for duplex controllers

Timer Settings (Timed Dose Mode Only)

Pump 1 *

On Time

Off Time

Override On Time

Override Off Time

Pump 2 *

On Time *

Off Time *

Override On Time *

Override Off Time *

Back

*visible only for independent timers mode

Level Settings (C-Level™ Mode Only)

Timed Dose Mode Simplex Demand Dose Mode Duplex Demand Dose Mode

= save and exit X= exit without saving

*the order of the alarm setting changes based on the value entered

Start

SJE Rhombus® 6 Type IFS Operation Manual

Alternation (Duplex Controller Only)

Alternate

Pump 1 Lead

Pump 2 Lead

Back

dvanced

Level Sensing

Timed/Demand Dose

Seal Fail/Thermal

Expansion Port

Overload Cutout

Alarm Options

Troubleshooting

Maximum Pumps On

General

Back

Level Sensing

Float Switches

C-Level Sensor

Back

C-Level™

Range (when C-Level™ Sensor is selected)

40” Sensor

Timed/Demand Dose

Timed Dose

Demand Dose

Back

Timer Type (when Timed Dose is selected, duplex panels only)

Single Timer

Independent Timers*

Back

Expansion Port

Seal Fail/Thermal (when Expansion Port is enabled)

Enable

Disable

Back

100” Sensor

Back

*Allows for two independent timed dose systems on a duplex panel

SJE Rhombus® 7 Type IFS Operation Manual

Setup Type

Auto

Manual

Manual Setup (when Manual Setup Type is selected)

000.0 kΩ

= save and exit X= exit without saving

Overload Cutout

Enable

Disable

Back

Alarm Options

Beacon Flash

Horn Flash

Manual Reset

Redundant High Water Lag (duplex controller with C-Level™ only)

Seal Fail Alarm (when Seal Fail/Thermal Module enabled)

Thermal Alarm (when Seal Fail/Thermal Module enabled)

Overload Alarm (when Overload Cutout enabled)

Back

Beacon Flash

No Flash

Flash All

Flash Alarm 2 Only

Back

Horn Flash

Flash All

Flash Alarm 2 Only

Back

Manual Reset

Redundant High Water Lag

Seal Fail Alarm

Thermal Alarm

Overload Alarm

Enable

Disable

Back

Enable

Disable

Back

Disable

Back

Disable

Back

SJE Rhombus® 8 Type IFS Operation Manual

Troubleshooting

C-Level™ Status *

Simulator

Frequency* 1234 Hz

Tank Level* 4.7 in

Float Status **

Lag Down

Alarm Down

Start Down

Stop Down

Pump Status

Pump 1 Called Off

Pump 1 Amps 0.01 A

Pump 2 Called*** Off

Pump 2 Amps*** 0.01 A

Alert Status

Horn Off

Beacon Off

Alarm Aux Off

Input Status

Test/Silence Off

Alarm 2 Off

Overload 1 Off

Overload 2 Off

Fault Status

Pump 1 Inactive

Thermal 1 Inactive

Seal 1 Inactive

Pump 2 *** Inactive

Thermal 2*** Inactive

Seal 2*** Inactive

Controller Status

DC Bus 1 22.50 V

DC Bus 2 11.80 V

DC Bus 3 3.29 V

Back

*Visible only for C

***Visible only for duplex configuration

-Level™ mode

**Float Status for duplex demand dose configuration.

Float labels change based on controller configuration.

Indice

Altri manuali SJE Rhombus Pannello di controllo

SJE Rhombus

SJE Rhombus H2O Drive RD150 Manuale utente

SJE Rhombus

SJE Rhombus TimeZone Guida alla risoluzione dei problemi

SJE Rhombus

SJE Rhombus 124 Manuale utente

SJE Rhombus

SJE Rhombus 123 Manuale utente

SJE Rhombus

SJE Rhombus 123 Manuale utente

SJE Rhombus

SJE Rhombus WellZone Manuale utente

SJE Rhombus

SJE Rhombus In-Site EZ Series Manuale utente

SJE Rhombus

SJE Rhombus 112 Manuale operativo e di manutenzione

SJE Rhombus

SJE Rhombus NEMA 4X Manuale utente

SJE Rhombus

SJE Rhombus Installer Friendly Series Manuale utente

SJE Rhombus

SJE Rhombus 122 Manuale utente

SJE Rhombus

SJE Rhombus Three Phase Duplex Manuale utente

SJE Rhombus

SJE Rhombus VS21-10.0-N3RD Manuale utente

SJE Rhombus

SJE Rhombus Installer Friendly Series Manuale utente

SJE Rhombus

SJE Rhombus 115 Manuale operativo e di manutenzione

SJE Rhombus

SJE Rhombus EZS Manuale utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche