SkyLink HU-318 Manuale utente
skylinkhome.com
User’s Manual
HU-318
2
CONTENTS
INTRODUCTION .........................................................................3
SETTING UP THE INTERNET HUB ...........................................4
PROGRAMMING THE INTERNET HUB .................................... 5-25
Assign Zones and Lights ..............................................................................7-11
All On/Off ......................................................................................................12
Device .......................................................................................................... 13
Scene ........................................................................................................... 14-15
Timer ............................................................................................................ 16-17
TC Remote ...................................................................................................18-20
Camera ........................................................................................................ 21-23
Settings ........................................................................................................ 24-26
APPENDIX ..................................................................................27-29
Resetting the Internet Hub ........................................................................... 27
Advanced Installation ................................................................................... 28-30
FCC / IC ...................................................................................... 31
WARRANTY ................................................................................32
CUSTOMER SERVICE ............................................................... 32
CONTENTS
3
SkylinkHome™ Internet Hub allows you to remotely control various devices from a
computer, a Smartphone or tablet.
With the wireless camera, you may visually see your command occur, turning on a
light or opening a door.
The following items are included in this package:
•OneInternetHub
•OnePoweradapter
•OneNetworkcable
•User’sManual
•SetupGuide
INTRODUCTION
INTRODUCTION
}CD
4SETTING UP THE INTERNET HUB
SETTING UP THE INTERNET HUB
Before installing the Internet Hub, ensure your system/network meets the following
requirements. You must have:
•AnEthernetRJ-45portfromyourexistingWirelessrouter.
•AcomputerinstalledwithanInternetBrowser.
Follow the steps below to setup your Internet Hub. Make sure you follow each step
carefully to ensure that the Internet Hub operates correctly.
1) Insert 4 AAA batteries into the Internet Hub
(with the correct polarity as shown). The LCD display will turn on and the
PowerLEDwillash.
2) Using the network cable (provided) connect the Internet Hub to
your Wireless router.
3) Insert the DC adapter into the Internet Hub and then plug into an AC outlet.
ThePowerLEDwillstayonsteadily.
Insert DC Adapter and BatteriesDCJackEthernetPort
5
TheInternetHubincludesawebgraphicsuserinterface(webGUI)whichallowsyou
toconguretheInternetHubusingyour
web browser on your computer.
After you have connected the Internet
Hub to your Wireless router and have
applied power to the Internet Hub, write
downtheIPaddressshownontheLCD
display of the Internet Hub, such as
192.168.001.199:8081. Yours may be
different from this.
LaunchyourwebbrowsersuchasInternetExplorer,GoogleChromeorFirefoxto
logintotheInternetHub.KeyintheIPshownontheLCDdisplayofyourInternet
Hub, e.g. http://192.168.001.199:8081. Or you may type in the default address
http://hu:8081.
Default User name : admin
DefaultPassword:admin
You will then see this screen:
PROGRAMMING THE INTERNET HUB
PROGRAMMING THE INTERNET HUB
6
PROGRAMMING THE INTERNET HUB
PROGRAMMING THE INTERNET HUB
Bydefault,theInternetHubissettoDHCPClient,whichautomaticallyobtains
IPaddressesfromyourrouter.However,insomeinstancesyoumaywanttoassign
staticIPaddressestotheInternetHubtoensureconvenientaccessibility.
ToassignstaticIP,Goto[Settings]andthen[NetworkSettings].
1.The[DDNSStatus]shouldshow“Ok”.WritedowntheDDNSname:
“nh007.my.skyhm.net”inthisexample(yourswillbedifferent)
andHttpPort:“8081”inthisexample.
2.Uncheckthe[DHCPclient]todisabletheDHCPClientfunction.
3.Click[SaveCong]tosavethecurrentsetting.
7
PROGRAMMING THE INTERNET HUB
ASSIGN ZONES AND LIGHTS
ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB
To setup the Internet Hub to control SkylinkHome™ Wireless Modules, follow the
steps below:
1. Assign different zones such as Kitchen, Bedroom, Family Room, Hallway etc.
2. Assign different devices in each zone, such as island lights, ceiling lights,
potlights,oorlampetc.
3. Learn the assigned light to the Wireless Module
Assign Zones and Lights
1.ClicktheZoneiconor[Zone]inthetoolbar.
2.Clickthe[Settings]icontochangethenameofthezone.
3.Enterthezonename,(e.g.Kitchen),thenclick[ADD].
Repeat this step for all the zones that you plan to assign.
8
4.Click[Zone]onthetopofthetoolbar.Selectthezone,
e.g.[Kitchen]toassigndifferentdevicestothiszone.
5.Clickthe[Settings]iconinthe‘KitchenDevicesControlPage’,
and then assign different devices in this zone.
6.Enterthenameofthedevice(e.g.IslandLights).Selectthetypeofmodule
controlled(On/OfforToggle,DimorNon-Dim)andthenclick[ADD].
PROGRAMMING THE INTERNET HUB
ASSIGN ZONES AND LIGHTS
ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB
9
PROGRAMMING THE INTERNET HUB
ASSIGN ZONES AND LIGHTS
ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB
7. After you have assigned a name for each light or device, you may now learn
the light to the Wireless Module. Refer to the User’s Instructions of that
specicreceivertoputtheunitinto‘Learning’mode,thenpressthe[Learn]
buttonontheInternetHubinterface.TheSignalLEDwillash,then
turnoffontheInternetHubindicatingthe‘Learn’codehasbeensent.
8. This light is now programmed to the Wireless Module.
Repeat the same instructions to program the rest of the lights.
9.Tooperatethelights,gotothe‘ZoneControlPage’.
Forexample,select[Kitchen]andchoosethelightyouwanttocontrol.
10
10.Eachlighthas4controlbuttons:On/Off/Bright/Dim
•Pressthe[ON]buttontoturnonthatlight.
•Pressthe[OFF]buttontoturnoffthatlight.
•Pressthe[Bright]buttontoincreasethebrightnessofthatlight.
•Pressthe[Dim]buttontodecreasethebrightnessofthatlight.
Note:Tochangethebrightness,makesuretheWirelessModuleandtheload
(i.e. the light bulb) are dimmable.
11. You can setup a camera to view live images of this zone.
Pleaserefertothe‘Settings page’ to setup a wireless camera.
PROGRAMMING THE INTERNET HUB
ASSIGN ZONES AND LIGHTS
ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB
12.Toprogramthezonecontrol,gototheZonepageandclick[Settings].
You will see the following screen. For instance, in the Kitchen zone,
there are 4 lights. First put the Island Light Module into learning mode,
thenpressthe[Learn]buttononthisscreen.NextputtheSpotLightmodule
intolearningmode,thenpressthesame[Learn]buttononthisscreenagain.
Repeatthisstepforallthemodulesinthe[Kitchen]zone.
Altri manuali per HU-318
1
Indice
Altri manuali SkyLink Interruttore
