INSTALLATION
Step 1: Find a suitable location to install the
transmitter into a plastic junction box within
20-feet of the re feature.
Step 2: Install the (4) AA batteries into the
transmitter. Fig. 4
Step 3: Run low voltage wire from the Home
Automation System to the junction box. Fig. 5
Step 4: Insert the low voltage wire into the
back of the transmitter securing each wire
into separate tabs and tightening the screws
to hold each wire. NOTE: Wires are not
polarity sensitive. Gently tug the wires to
ensure they are secure. See g. 5.
Step 5: Secure the transmitter into the face
plate by snapping it into place. Fig 6.
Step 6: Install the transmitter into the
junction box, attach slide button and
installation is complete. See g. 7.
Fig. 6 Securing transmitter to face plate.
Fig. 5 Inserting thermostat wire.
Skytech AF-4000HAT
Fig. 7. Installing transmitter into junction box.
WALL
Plastic Switch Box
Transmitter
Wall Cover Plate
ACTIVE
OFF
HOME AUTOMATION LINK
Transmitter
Slide Button
DESCRIPTION OF TRANSMITTER POSITIONS
ACTIVE
OFF
HOME AUTOMATION LINK
ACTIVE - Position enables the user to operate the appliance with a home
automation system including a hand held remote control.
OFF - Sends a wireless RF signal to turn OFF the appliance and ignores
any commands from the Home Automation System. It will allow the
appliance to be operated with a hand held remote (if applicable).
Fig. 3. Transmitter positions.
REV. 3-8-16 Page 2
Requires 4-AA 1.5V
alkaline batteries
Battery cover slides on/off
Slide Switch
to OFF or
AUTO
OFF | AUTO
Fig. 4 Installing AA batteries.
fire-parts.com
