Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired
operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
The FCC label and information is placed inside the battery door of the Slacker Portable.
The battery door must be removed, along with the battery to locate this label.
Refreshing Your Slacker Portable Using USB
The Slacker Portable is unique in that it connects to your PC over USB much like other
devices; however it then uses your Internet connection to retrieve the latest content for you
so that you don’t have to download the music yourself.
If you experience any issues refreshing the stations on your Slacker Portable using the
USB connection on your PC, please check the following:
2) If you have the Slacker Software Player installed, try uninstalling and reinstalling the
application before attempting another refresh over USB.
Enabling the Touch Strip on your Slacker Portable
The Slacker Portable features an innovative Touch Strip for quick navigation and easy
access to your music. This option is disabled by default, but you can easily enable this
feature to take advantage of the benefits the Touch Strip may provide to you.
1) It is easy to enable or disable the Touch Strip on the Slacker Portable:
2) Once the Touch Strip is enabled you can tap the area next to the album art or button that
you wish to select. This area is indicated by a white stripe on the face of the player, to the
left of the display.
a. From the main menu of the Slacker Portable, choose “Settings”, then “Display”,
then “Touch Strip” and choose “On” or “Off” to enable or disable the Touch Strip.
a. Be sure to “tap” these areas to select the item, try not to “slide” your finger up and
down, this can offer you one click access to the selection you choose.
For more info on your Slacker Portable visit www.slacker.com/support
a. From your “Start” button, select “All Programs”, locate the Slacker folder and select
“Uninstall”. Once complete, restart your PC before connecting the Slacker Portable
directly to the USB port of your computer.
1) Make sure that you have installed the Slacker Software Player, this can be
found at www.slacker.com/install. If you have successfully installed the Slacker
Software Player you should see a Slacker Icon in your system tray.
