SMART-AVI DVR-4X4 Manuale utente
DVR-4x4
4-port DVI-D Matrix Switch
USER MANUAL
DVR-4X4 DVI-D 4x4 Router
1-888-994-7427
www.smartavi.com
4x4 DVI-D Matrix Switch 2
OVERVIEW
TECHNICAL SPECIFICATIONS_________________________________________________________________
WHAT’S IN THE BOX?________________________________________________________________________
FRONT AND BACK___________________________________________________________________________
INSTALLATION_______________________________________________________________________________
DCC LEARNING______________________________________________________________________________
FRONT PANEL________________________________________________________________________________
ESTABLISHING AN RS-232 CONNECTION_____________________________________________________
TROUBLESHOOTING_________________________________________________________________________
TECHNICAL SUPPORT________________________________________________________________________
3
4
4
5
6
7
7-8
8-10
11
11
12
4x4 DVI-D Matrix Switch 3
Technical Specifications
VIDEO
Format DVI-D Single Line
Input interface (4) DVI-D 29-pin (Female)
Output interface (4) DVI-D 29-pin (Female)
Up to 1920x1200 @ 60hz
DDC 5 volts p-p (TTL)
Input Cable Length
Output Cable Length
CONTROL
Front Panel Select/Switch between sources
RS-232
OTHER
Power Adapter External 100-240 VAC/5VDC4A
Dimensions 12” W x 2” H x 6.5” D
Weight 2.3 lbs
32 to 104°F (0 to 40°C)
Storage Temperature 4 to 140°F (-20 to 60°C)
Humidity Up to 95% (non-condencing)
4x4 DVI-D Matrix Switch 4
What’s in the box?
Front and back
PART NO. Q-TY DESCRIPTION
DVR-4X4 1 DVI-D 4x4 Router
PS5VD4A 1 5 V DC 4 A
1
DVR-4X4 Front Panel
DVR-4X4 Back Panel
4x4 DVI-D Matrix Switch 5
INSTALLATION
1.
2. Connect the DVI video cables from the computers to the DVI-D inputs on the rear of the DVR-4X4.
3. Connect the DVI displays to the DVI-D outputs on the rear of the DVR-4X4.
4.
5. Power on the DVR-4X4.
6. Power on the computers and displays. If the monitors don’t display correctly see DDC Learning.
DVR-4X4
VIDEO IN
VIDEO OUT
RS232
4x4 DVI-D Matrix Switch 6
DDC learning
DDC provides plug-and-play capability to your displays. When you plug a display into your computer,
DDC Learning Menu
Connect 1 monitor only to Output 1.
To access the DDC learning feature of the DVR4X4, press
and hold both the Input Select and Output Select
simultaneously for 3 seconds to enter learning mode. The
red LEDs will read LErn.
“LE-S
display connected to the [Out 1] output port. If no screen
is detected the display will read Err. This DDC will be used
by all the connected computers.
“LE-P
of a PC display, which typically works for any PC/Display
and when selected will be used by all the connected
computers.
“LE-A
in the SmartAVI device and when selected will be used by
all the connected computers.
MENU Opons
To cycle through the menu items, press Input Select. To
select a menu item, press Output Select and you will exit
the DDC menu. To exit the DDC menu, you must select a
4x4 DVI-D Matrix Switch 7
front panel
ESTABLISHING AN RS-232 CONNECTION
number indicates the current INPUT or source for each OUTPUT or display indicated by the green LED.
RS-232
DB9 to DB9
Crossed Cable
RS-232
DB9 to DB9
Straight Through Cable
Figure 7-1
Examples of 9 pin RS-232 Straight Through and Crossed Cables
Before you start:
Controlling a SmartAVI device via RS-232 requires an RS-232 card installed on your computer or a USB
the SmartAVI device.
Check the device and your PC to determine if you need a male to male or a male to female cable and
how long it needs to be. This SmartAVI device uses a straight through cable.
Adapter to convert a straight through cable to a crossed cable or a crossed cable to a straight through
cable. Examples of crossed and straight thorough cable pin-outs are shown below. The standard
maximum length for an RS-232 cable is 50 feet. Call our Smart-AVI Support Engineer if you require
Switching Between Ports
To select an output press Output Select.
The green LEDs will change to indicate the selected
output. Then press Input Select and the LED number will
the selected input or source will display on the selected
output or display.
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
2Rx
Tx
Gnd
Rx
Tx
Gnd
3
5
2
3
5
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
2Rx
Tx
Gnd
Tx
Rx
Gnd
3
5
2
3
5
4x4 DVI-D Matrix Switch 8
ESTABLISHING AN RS-232 CONNECTION (continued)
RS-232 CONTROL WITH Smart Control Pro
Establish a connecon to the Smart-AVI device:
1. Connect an RS-232 cable to the RS-232 connector on the PC.
2. Connect the other end of the cable to the RS-232 port of the device.
3.
below.
4. Power on the device.
used, do the following:
Go to the Smart-AVI website, www.smartavi.com and click Support.
On the Support page click on “HELPFUL LINKS TO SOFTWARE”.
On the HELPFUL LINKS page click on SmartControlPro.
SmartControlPro-v5-0-03_Installer.zip should begin to download.
Execute SmartControlPro-v5-0-03_Installer.exe and follow the prompts to install the Smart Control Pro
When executed Smart Control Pro will present you with
“No”.
1.
2. Click on Control Panel.
3.
4.
LPT).
Figure 8-1
4x4 DVI-D Matrix Switch 9
RS-232 CONTROL WITH Smart Control Pro (continued)
is for users with more than 1 SmartAVI
device.
Use the “Router Type” drop down to
select your connected SmartAVI device
from the list.
connected to your SmartAVI device with
from the “Com Port” drop down list. See
Port to select.
Figure 9-1
Figure 9-2
Figure 9-3
4x4 DVI-D Matrix Switch 10
RS-232 CONTROL WITH Smart Control Pro (continued)
the File Tab you can Create and save
By clicking on a square to the right of an
Input and under an output you can switch
that source to that display.
assign names to your input ports (sources)
and output ports (Displays).
Figure 10-1
Figure 10-2
Altri manuali per DVR-4X4
1
Indice
Altri manuali SMART-AVI Commutatore a matrice
SMART-AVI
SMART-AVI DVR-4X4 Manuale utente
SMART-AVI
SMART-AVI SuperMatrix Manuale utente
SMART-AVI
SMART-AVI VNET+2P Manuale utente
SMART-AVI
SMART-AVI MU-88 Manuale utente
SMART-AVI
SMART-AVI MXU-88 Manuale utente
SMART-AVI
SMART-AVI CATXPro Manuale utente
SMART-AVI
SMART-AVI MXU-88 Plus Manuale utente
SMART-AVI
SMART-AVI HDR-8X8-Plus Manuale utente
SMART-AVI
SMART-AVI MXU-88 Manuale utente
SMART-AVI
SMART-AVI QWALL-HD Manuale utente
SMART-AVI
SMART-AVI HDR-4x4-Plus Manuale utente
SMART-AVI
SMART-AVI HDR-4X2-Pro Manuale utente
SMART-AVI
SMART-AVI HDR-ULTRA Manuale utente
SMART-AVI
SMART-AVI HDR-8X8-XT Manuale utente
SMART-AVI
SMART-AVI MXWall-LT Manuale utente
SMART-AVI
SMART-AVI HDR-4x4-Plus Manuale utente
SMART-AVI
SMART-AVI FXCORE MX88 Manuale utente
SMART-AVI
SMART-AVI MXCORE Series Manuale utente
SMART-AVI
SMART-AVI MXWALL-UHD Manuale utente
SMART-AVI
SMART-AVI HDR-4x4-Plus Manuale utente
