SMART-AVI MXWALL-UHD Manuale utente

8×8 Ultra HD (4K@60Hz) Video Wall

Customize 8 inputs and 8 outputs through IP Control,

RS-232 command capabilities, and a Windows GUI



MADE IN USA

MXWALL-UHD

Installation

Manual

1 Introduction..............................................................................................................

2 Front Panel Control.................................................................................................

3 Rear Panel.................................................................................................................

4 RS232 Control..........................................................................................................

4.1 RS232 Connector....................................................................................................

5 MXWALL-UHD User Guide..................................................................................

5.1 Connecting with the Web Page..........................................................

5.1.1 Connecting with the Web Page: Video Matrix...............

5.1.2 Connecting with the Web Page: TV Wall.........................

5.1.3 Connecting with the Web Page: Configuration.............

5.2 Connecting with the Software............................................................

5.2.1 Connecting with the Software: Account Creation and

Modification..........................................................................

5.2.2 Connecting with the Software: Ethernet Connection..

5.2.3 Connecting with the Software: RS232 Connection......

5.3 Using MXWALL-UHD...........................................................................

5.4 Navigating MXWALL-UHD..................................................................

6 Electrical parameters..............................................................................................

7 Package Contents...................................................................................................



MXWALL-UHD is a high-performance seamless UHD matrix switcher with 8x HDMI inputs and 8x

HDMI outputs. Audio extract or insert can also be enabled on this device. IR matrix routing on this

video matrix is followed with video routing. MXWALL-UHD support one or more video wall with

RS232 command

MXWALL-UHD key features support:

• HDMI 2.0/HDCP 2.2

• Seamless switching

• Video Wall Configurations

• IR matrix

• HDMI audio extract

• External LR audio insert on HDMI stream

• EDID management

• HDMI video output resolution up to 3840x2160@60

• Front panel, RS232, and TCP/IP (LAN 10M/100M) control

  

• Press buttons OUTPUT n + INPUT m + TAKE in this order to switch matrix input n and output m.

• Press button POWER and hold for 5 seconds, this will put the matrix into standby mode.

Press button POWER and hold for 1 second to power on the matrix

• Press button LOCK to lock or unlock front buttons. When locked, the LOCK LED will light up.

• Press buttons ALL + INPUT m + TAKE in this order to switch all of the outputs to the specified

input m.

• Press button SAVE + OUTPUT n + TAKE in this order to save the current “scene” as scene n.

The matrix can save up to 8 total scenes.

• Press button RECALL + OUTPUT n + TAKE to load saved scene n.

• Press button RES + OUTPUT n + NEXT + TAKE, to change output resolution of OUTPUT n

Resolution options:

AUTO:

3840x2160@60, 3840x2160@50, 3840x2160@30, 3840x2160@25,

1920x1200@60,1920x1080@60, 1920x1080@50, 1600x1200@60,

1400x1050@60, 1366x768@60,1360x768@60,1280x1024@60,

1280x768@60,1280x720@60, 1280x720@50, 1024x768@60

When select AUTO resolution, the output port will set the output resolution according to the

displayer prefer timing/resolution;

• Press buttons EDID + INPUT m + NEXT + TAKE, change the EDID mode of port INPUT m

EDID option:

3840x2160@60, 3840x2160@30, 1920x1200@60, 1920x1080@60, 1280x1024@60,

1280x720@60, 1024x768@60

 

• LAN(10M/100M), RS232 are for the MXWALL-UHD software.

  

Analog

• IR IN and IR OUT

IR IN/OUT is for remote control routing, and follow the video routing.

For example, if input HDMI m is routed to output HDMI n1 and n2 ports, then IR IN n1 and

n2 ports will be routed to IR OUT m port. Please refer bellow illustration.

Relationship between video and IR routing

IR extender connectors (not as accessories)

• RS-232 control, baud rate 9600, DB9 connector

• Port RS232-1 uses a DB9 female connector. The user will need to use the corresponding

direct/straight RS232 cable. The pin layout is shown as follows:



    

Baud rate 9600

Index Pin

1 N/A

2 TX (Matrix → PC) PC )

3 RX (Matrix → PC)

4 N/A

5 Ground

6 N/A

7 N/A

8 N/A

9 N/A

• RS232-2 and IR-EXT ports are reserved for future development

The MXWALL-UHD can be connected through either the web or our provided software.

The web connection will require the device to be on the same network as the PC that will

control it. With our provided software, the user has the option to also connect to the

device through either the network or via RS232.

 

The IP address of the device can be found our provided application SmartFinderPro.

Simply open the application and click Find. It will provide a list of all the devices with their

IP address and MAC address. The user can also double click the IP address to quickly open

a web browser to go directly into using the web page.

        

By using the web page, the user is provided with two different options on how to

configure their video settings.

1. Video Matrix: This is the home page that the user starts in. Video Matrix allows the

user to quickly select each individual input and output.

2. TV Wall: This page allows the user to create “stitches” of their inputs, creating an

intuitive experience for video walls.

              

To use the TV Wall mode, click on the “TV Wall” link on the top right of the page.

1. Save Selection: To create a stitching, simply click on the desired input first and “drag

and drop” within the given matrix as seen below. Once the panel is highlighted in blue

to how the user would like to stitch, click save selection. This will change the panel to

show what input is currently being stitched.

2. Clear Selection: To remove any stitches, simply click clear selection. This button will

be grayed out unless there is an existing stitching.

           

On the top left of the page there is a purple button with three lines, clicking this will open up the

Configuration page. Please note that the Matrix Switch page only displays the “Open Settings” option.

For the TV Wall, the user is provided with the option to change matrix presets and can also set the

resolution.

Presets:

• 2x4

• 1x8

• 2x2

Resolutions:

• 1920 x 1080 @ 60 Hz (1080p60)

• 3840 x 2160 @ 30 Hz (4k30)

• 3840 x 2160 @ 60 Hz (4k60)

             

Upon launching the MXWALL-UHD software, the user will be prompted to sign in. On first boot

up, the Administrator username and password will already be provided. The user may add additional

users with or without administrative privileges within the Users tab.

        

Default password of Administrator（access to all features）： 12345

1. Select an existing using on the list to edit credentials or fill in the User name and User password

field to create a new account.

2. If editing an existing account, click save. Otherwise click add once you have filled in the required

fields to create an account.

             

The user can search for the MXWALL-UHD using the Connect tab in the MXWALL-UHD software

as long as the device and PC are within the same network. After opening Connect, select “Use

network connection” and click on “Start” next to Search devices. Select the connected Matrix to

add to the main page and then click OK.

          

This setup is similar to using the network on the software to connect. Select “Use serial port connection”

in the Connect tab and change the Serial port name to the appropriate COM port connection and set the

Baud rate to 9600. Once all of these settings are selected, click OK and the software will search for the

matrix using RS232.

           

Regardless of how the software connects to the device, controlling it will all be the same. Once the

connection has been established, the user can begin stitching together the monitors and changing

inputs.

a) Under the word tab section, the connection to the matrix will show as either an IP address or

COM port depending on how the user connects to the device. Within the green box shown below,

there are three MXWALL- UHD devices connected. The blue highlighted tab (192.168.1.113) will

show which device is currently being controlled for interaction.

      

On the left side in the PURPLE BOX where Input 1 – 8 is shown, the user can drag these input boxes

to the desired output. The user is also able to drag these inputs into stitched sets already to

seamlessly change. When creating new stitches, the lowest input within the stitching range will

always take priority when the stitch is created. For example, if the user were to stitch the two panels

in the BLUE BOX together, Input 1 has precedence over Input 5, therefore would create a 1x2 stitching

with Input 1. The user however can simply make this Input 5 by dragging the box labeled Input 5 from

the left side.

On the right side in the RED BOX, users are able to register and reload layouts to quickly set up the

matrix to their liking. To register a layout, simply draw out the monitor stitching and type in the

name of the layout. Press the “Add” button to register it. Multiple layouts may be registered. It is

also possible to edit currently saved layouts by simply pressing “Save” while highlighting an existing

layout.

The Close All tab in the PINK BOX is an easy way to quickly close out all existing stitches.d)

There are several main tabs within the MXWALL-UHD software.

1. Connections – Opening this menu will bring up a window that shows all currently connected

devices, showing their connection type. Here the user can easily remove a connected device by

highlighting the connection and clicking REMOVE. The user can also use the CONNECT button

in this window to switch to the highlighted device as well.

        

Altri manuali SMART-AVI Commutatore a matrice

SMART-AVI

SMART-AVI MXWall-LT Manuale utente

SMART-AVI

SMART-AVI MXU-88 Manuale utente

SMART-AVI

SMART-AVI HDR-4x4-Plus Manuale utente

SMART-AVI

SMART-AVI CATXPro Manuale utente

SMART-AVI

SMART-AVI HDR-4X2-Pro Manuale utente

SMART-AVI

SMART-AVI HDR-4x4-Plus Manuale utente

SMART-AVI

SMART-AVI DVR-4X4 Manuale utente

SMART-AVI

SMART-AVI FXCORE MX88 Manuale utente

SMART-AVI

SMART-AVI 4K-WALL Manuale utente

SMART-AVI

SMART-AVI DVR-4X4 Manuale utente

SMART-AVI

SMART-AVI SuperMatrix Manuale utente

SMART-AVI

SMART-AVI HDR4X2 Manuale utente

SMART-AVI

SMART-AVI QWALL-HD Manuale utente

SMART-AVI

SMART-AVI CATSwitch CSWP64X16S Manuale utente

SMART-AVI

SMART-AVI HDR-4x4-Plus Manuale utente

SMART-AVI

SMART-AVI HDR8X8 Manuale utente

SMART-AVI

SMART-AVI MXU-88 Plus Manuale utente

SMART-AVI

SMART-AVI MU-88 Manuale utente

SMART-AVI

SMART-AVI MXCORE Series Manuale utente

SMART-AVI

SMART-AVI HDR-8X8-XT Manuale utente

SMART-AVI

SMART-AVI DVR4X4S Manuale utente

SMART-AVI

SMART-AVI SNV64X16S Manuale utente

SMART-AVI

SMART-AVI MU-88 Manuale utente

SMART-AVI

SMART-AVI HDR-8X8-Plus Manuale utente

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

CYP

CYP nT15GX01 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette