SMART-AVI SM-DVN Series Manuale utente

SM-DVN SERIES

Advanced 2-Port DVI-I KVM Switch

USER MANUAL

Designed and Manufactured in the USA

1-800-284-2131

www.smartavi.com

SM-DVN-2S 2-Port Single-Head DVI-I KVM Switch

SM-DVN-2D 2-Port Dual-Head DVI-I KVM Switch

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 2

OVERVIEW

TECHNICAL SPECIFICATIONS_________________________________________________________________

WHAT’S IN THE BOX?_________________________________________________________________________

FRONT AND BACK___________________________________________________________________________

INSTALLATION_______________________________________________________________________________

SYSTEM OPERATION_________________________________________________________________________

FRONT PANEL CONTROL_____________________________________________________________________

HOTKEY AND RS232 SERIAL CONTROL_______________________________________________________

CUSTOM HOTKEY TRIGGERS_________________________________________________________________

LED’S BEHAVIOUR___________________________________________________________________________

TROUBLESHOOTING_________________________________________________________________________

TECHNICAL SUPPORT________________________________________________________________________

LIMITED WARRANTY STATEMENT____________________________________________________________

5-6

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 3

Technical Specifications

VIDEO

Format DVI Dual Link, DVI Single-Link, VGA

Maximum Pixel Clock 165 MHz

Input Interface SM-DVN-2S (2) DVI-I 29-pin

SM-DVN-2D (4) DVI-I 29-pin

Output Interface SM-DVN-2S (1) DVI-I 29-pin

SM-DVN-2D (2) DVI-I 29-pin

Resoluon DVI Dual-Link: 2560 x 1600, DVI Single-Link: 1920 x 1200, VGA: 1920 x 1080

Color Mode 24-bit

DDC 5 volts p-p (TTL)

Input Equalizaon Automac

Input Cable Length Up to 20 

Output Cable Length Up to 20 

Data Rate 1.65 Gbps per color

Console Monitors Supports both digital and analog monitors

AUDIO

Input Interface (2) 3.5 mm Stereo Audio

Output Interface (1) 3.5 mm Stereo Audio

Impedance 600 Ohm

Frequency Response 20 Hz to 20 kHz

Nominal Level 0-1.0 V

Common Mode Rejecon at 60 dB

USB

Signal Type USB 2.0, 1.1, and 1.0 w/ internal hub

Input Interface (2) USB Type B (female)

Output Interface (2) USB Type A (female) for K/M emulaon; (2) for USB 2.0 Transparent

CONTROL

Front Panel Push Buons with LED Indicators

RS-232 DB9 Female - 115200 N,8,1, No ow control

Hot Keys Via Keyboard

OTHER

Power Adapter External 100-240 VAC/12VDC2A @ 24W

Dimensions 8.8” W x 2.63” H x 6.69” D

Weight 3.85 lbs

Approvals UL, CE, ROHS Compliant

Operang Temperature +32 to +104°F (0 to +40°C)

Storage Temperature -4 to 140°F (-20 to +60°C)

Humidity Up to 80% (No Condensaon)

Emulaon Keyboard and Mouse

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 4

What’s in the box?

FRONT AND BACK

PART NO. Q-TY DESCRIPTION

SM-DVN Unit 1 2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support

PS5VDC2A 1 Power Adapter

1 User Manual

SM-DVN-2S Back SM-DVN-2D Back

SM-DVN-2S Front SM-DVN-2D Front

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 5

INSTALLATION

1. Ensure that power is turned o or disconnected from the unit and the computers.

2. Use a DVI cable to connect the DVI output port from each computer to the corresponding DVI-I IN

ports of the unit.

3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respecve

USB ports of the unit.

4. Oponally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the com-

puters to the AUDIO IN ports of the unit.

5. Connect a monitor to the DVI-I OUT console port of the unit using a DVI cable.

6. Connect a USB keyboard and mouse in the two USB console ports.

7. Oponally connect stereo speakers to the AUDIO OUT port of the unit.

8. Finally, power on the KVM by connecng a 12VDC power supply to the power connector, and then

turn on all the computers.

Note: You can connect up to 2 computers to the 2 port KVM.

DVI IN

DVI OUT

USB IN

USB K/M OUT

USB 2.0 OUT

AUDIO IN

AUDIO OUT

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 6

Installation (continued)

EDID LEARN

The KVM is designed to learn the connected monitor’s EDID upon power up. In the event of

connecng a new monitor to the KVM, a power recycle is required.

The KVM will indicate to the user the EDID learn process by ashing the front panel’s LEDs. Port one

green and push buon blue LEDs will both begin to ash for about 10 seconds. When the LEDs stop

ashing, the EDID learn process is done.

If the KVM has more than one video board (such as dual-head and quad-head models), then the unit

will connue to learn the EDIDs of the connected monitors and indicate the progress of the process

by ashing the next port selecon green and push buon blue LEDs respecvely.

The monitor must be connected to the video output connector located in the console space at the

back of the KVM during the EDID learn process.

If the read EDID from the connected monitor is idencal to the current stored EDID in the KVM then

the EDID learn funcon will be skipped.

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 7

System operation

front panel control

hotkey and rs232 serial control

There are three ways to control the SM-DVN: Keyboard Hotkeys, RS-232 Serial Commands, and Front

Panel Buons. All modes of control will allow the user the set their desired conguraons.

The SM-DVN may also be controlled via RS-232 commands. To use these commands, you must use

HyperTerminal or an alternate terminal applicaon. The sengs for the connecon are as follows:

Baudrate 115200; Data Bits 8; Parity None; Stop Bits 1; Flow Control None.

Once you have connected to the SM-DVN via Serial, you will see the SM-DVN informaon when the

device starts up.

The following commands can be used for RS-232 with available keyboard hotkeys:

COMMAND DESCRIPTION HOTKEY RS-232 COMMAND

Switch all USB devices and Main video [CTRL][CTRL] [port #] [ENTER] //m[port #] [ENTER]

Switch Audio Only [CTRL][CTRL] a[port #] [ENTER] //a[port #] [ENTER]

Switch KM Only [CTRL][CTRL] c[port #] [ENTER] //c[port #] [ENTER]

Switch USB Only [CTRL][CTRL] u[port #] [ENTER] //u[port #] [ENTER]

Learn EDID [CTRL][CTRL] e[ENTER] //e[ENTER]

Trigger Hotplug [CTRL][CTRL] h[ENTER] //h[ENTER]

Reset Soware [CTRL][CTRL] r [ENTER] //r[ENTER]

Factory Defaults [CTRL][CTRL] f [ENTER] //f[ENTER]

Same as front panel ◄ M1 buon [HK][HK] ▲//?? [ENTER]

Same as front panel M2 ► buon [HK][HK] ▼ //?? [ENTER]

Get Port Status N/A //?? [ENTER]

To switch to an input port, simply push the buon on the front-panel of the KVM. If an input port is

selected, the LED of that port will turn on.

Hold down the buon of Front Panel for 3 seconds to force learn EDID.

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 8

Custom hotkey triggers

Users are able to customize the keys that trigger Hotkeys. The default trigger for hot key funcon on

the keyboard is Ctrl + Ctrl. The trigger funcon can be used to change to the following keys:

Ctrl (Le / Right), Alt, Shi (Le / Right), Caps Lock,Scroll Lock, F1-F12

TO VIEW HOTKEY TRIGGER SETTING

Use the RS-232 command: / +/ +? +? +Enter to view the current HotKey Trigger To reset the Hotkey

Trigger use the “Factory Defaults” command.

TO CHANGE THE HOTKEY TRIGGER SETTING

HotKey + HotKey + x+ [desired hotkey]

Example: If users current Hotkey trigger is Shi and want to change to Scroll Lock, user would type

Shi + Shi + x+ Scroll Lock

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 9

Led’s behavior

User Console Interface – Display LED:

Front Panel – Port Selecon LED’s:

EDID Learn - Front Panel LED’s:

All LED’s are turned on for 1 second. Then:

• Port 1 LED’s will ash unl the end of the process.

• Port 2 LED’s will ash unl the end of the process if a second video board exists (Dual-head KVM)

IMPORTANT!

If all Front Panel LED’s are on and

not ashing, the POWER UP SELF

TEST has failed and all funcons are

disabled. Check if any of the front

panel port selecon buons are

jammed. In this case, release the

jammed buon and recycle the power.

If power up self test is sll failing,

please contact SmartAVI technical

support at [email protected].

# STATUS DESCRIPTION

1O Monitor is not connected

2On Monitor is connected

3 Flashing EDID problem – Learn EDID to x the problem

# STATUS DESCRIPTION

1O Non-selected port

2On Selected port

3 Flashing EDID learn in process

2-Port DVI-I Dual Link KVM Switch with Audio and USB 2.0 Support 10

Troubleshooting

Technical support

No Power

• Make sure that the power adapter is securely connected to the power connector of the unit.

• Check the output voltage of the power supply and make sure that the voltage value is around

12VDC.

• Replace the power supply.

No Video

• Check if all the video cables are connected properly.

• Connect the computer directly to the monitor to verify that your monitor and computer are

funconing properly.

• Restart the computers.

Keyboard is not working

• Check if the keyboard is properly connected to the unit.

• Check if the USB cables connecng the unit and the computers are properly connected.

• Try connecng the USB on the computer to a dierent port.

• Make sure that the keyboard works when directly connected to the computer.

• Replace the keyboard.

Mouse is not working

• Check if the mouse is properly connected to the unit.

• Try connecng the USB on the computer to a dierent port.

• Make sure that the mouse works when directly connected to the computer.

• Replace the mouse.

No Audio

• Check if all the audio cables are connected properly.

• Connect the speakers directly to the computer to verify that the speakers and the computer

audio are funconing properly.

• Check the audio sengs of the computer and verify that the audio output is through the

speakers.

For product inquiries, warranty quesons, or technical quesons, please contact inf[email protected].

Altri manuali per SM-DVN Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SMART-AVI Interruttore

SMART-AVI

SMART-AVI DPN-4 Duo Manuale utente

SMART-AVI

SMART-AVI SM-KMN-08 Manuale utente

SMART-AVI

SMART-AVI V2VMax Manuale utente

SMART-AVI

SMART-AVI HDR-16x16 Plus V3-S Manuale utente

SMART-AVI

SMART-AVI HDN-8P Manuale utente

SMART-AVI

SMART-AVI DPN-4DUO Manuale utente

SMART-AVI

SMART-AVI HDN-4DUO-S Manuale utente

SMART-AVI

SMART-AVI SKM-08 Manuale utente

SMART-AVI

SMART-AVI DV-SW2 Manuale utente

SMART-AVI

SMART-AVI DPN-4QUAD Manuale utente

SMART-AVI

SMART-AVI HDMV-8X Manuale utente

SMART-AVI

SMART-AVI UHDN-4P Duo Manuale utente

SMART-AVI

SMART-AVI UHD-2DUO Manuale utente

SMART-AVI

SMART-AVI D2H-4P Manuale utente

SMART-AVI

SMART-AVI SKM-04-PLUS Manuale utente

SMART-AVI

SMART-AVI HDN-4Ps Manuale utente

SMART-AVI

SMART-AVI DVN-4QUAD Manuale utente

SMART-AVI

SMART-AVI D2H-4P Quad Manuale utente

SMART-AVI

SMART-AVI DPN-4P Manuale utente

SMART-AVI

SMART-AVI DPN-4P Manuale utente

SMART-AVI

SMART-AVI DVN-4PRO Manuale utente

SMART-AVI

SMART-AVI DVN-4DUO Manuale utente

SMART-AVI

SMART-AVI DV-SW8-p Manuale utente

SMART-AVI

SMART-AVI SM-DPN-4Q-S Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente