SMC Networks Barricade Manuale utente

Cable/DSL Router

User Guide

The information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and

reliable. However, no responsibility is assumed by SMC for its use, nor for any

infringements of patents or other rights of third parties which may result from its use. No

license is granted by implication or otherwise under any patent or patent rights of SMC.

SMC reserves the right to change specifications at any time without notice.

SMC Networks, Inc.

6 Hughes, Irvine, CA 92618

-1-

Trademarks:

SMC is a registered trademark; and Barricade is a registered trademark of SMC Networks, Inc. Other

products and company names are trademarks or registered trademarks of their respective holders.

FCC Interference Statement:

This equipment has been tested and found to comply with the limits for a Class B digital

devicepursuanttoPart15oftheFCCrules. These limits are designed to provide reasonable

protection against radio interference in a commercial environment. This equipment can

generate, use and radiate radio frequency energy and, if not installed and used in accordance

with the instructions in this manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause

interference, in which case the user, at his own expense, will be required to take whatever

measures are necessary to correct the interference.

CE Declaration of Conformity:

This equipment complies with the requirements relating to electromagnetic compatibility,

EN55022/A1ClassB,andEN50082-1. This meets the essential protection requirements of

the European Council Directive 89/336/EEC on the approximation of the laws of the

member states relation to electromagnetic compatibility.

-2-

Table of Contents

Chapter 1 Introduction.................................................................................4

1.1 Functions and Features...................................................................4

1.2 Packing List....................................................................................5

Chapter 2 Hardware Installation..................................................................6

2.1. Panel Layout..................................................................................6

2.2. Installation Requirements ..............................................................7

2.3. Procedure for Hardware Installation..............................................8

Chapter 3 Network Settings and Software Installation .............................10

3.1 Setting your computer network settings properly.........................10

3.2 Install the Software into Your Computers ....................................11

Chapter 4 Configuring the Barricade.........................................................14

4.1 Startup and Log in ........................................................................14

4.2 Status ............................................................................................15

4.3 Toolbox.........................................................................................16

4.4 Primary Setup ...............................................................................17

4.5 DHCP Server................................................................................19

4.6 Virtual Server................................................................................20

4.7 Special AP....................................................................................22

4.8 Access Control..............................................................................23

4.9 Miscellaneous Items .....................................................................24

Chapter 5 Print Server ...............................................................................25

5.1 Configuring on Windows 95/98 Platforms ...................................25

5.2 Configuring on Windows NT Platforms.......................................27

5.3 Configuring on Unix based Platforms ..........................................28

-3-

Appendix A: Console Mode......................................................................29

Appendix B: TCP/IP Configuration for Windows 95/98..........................30

B.1 Installing TCP/IP protocol into your PC......................................30

B.2 Setting TCP/IP protocol to work with the Barricade...................31

Appendix C: Installation Guide For Specific ISP .....................................38

C.1 @Home ........................................................................................38

C.2 MediaOne.....................................................................................39

-4-

Chapter 1 Introduction

Congratulationson your purchase of theBarricade. This product is specificallydesigned for

small office and home office needs. It provides a complete SOHO solution for Internet

surfing and for sharing office resources. Step-by-step instructions make installation easy.

Before installing and using this product, please take the time to read this manual for

complete operating information.

1.1 Functions and Features

lBroadband modem and IP sharing

-connects multiple computers to a broadband (cable or DSL) modem or an

Ethernet router to surf the Internet.

lAuto-sensingEthernetSwitch

-equipped with a 4-port 10/100Mbps auto-sensing Ethernet switch.

lVPN supported

-supports multiple PPTP sessions and allows you to set up VPN server and VPN

clients.

lPrinter sharing

-embeds a print server to allow all of the networked computers to share one

printer.

lFirewall

-allunwantedpacketsfromoutsideintrudersareblockedtoprotectyourIntranet.

lDHCPserversupported

-all of the networked computers can retrieve TCP/IP settings automatically from

the Barricade.

lWeb-based configuring

-5-

-configurable through any networked computer’s web browser using Netscape or

Internet Explorer.

lAccess Control supported

-allows you to assign different access right for different users.

lVirtual Server supported

-enables you to expose WWW, FTP and other services on your LAN to be

accessible to Internet users.

lUser-Definable Application Sensing Tunnel

-users can define the attributes to support the special applications requiring

multiple connections such as Internet gaming, video conferencing, Internet

telephony, et al. Then this product can sense the application type and open a

multi-port tunnel for it.

lDMZ Host supported

-allows a networked computer to be fully exposed to the Internet; this function is

used whenthe specialapplication sensing tunnel feature is insufficient to allow an

application to function correctly.

1.2 Packing List

lBarricade Broadband Router

lInstallation CD

lPower adapter

lTwo CAT-5 UTP Ethernet cables

-6-

Chapter 2 Hardware Installation

2.1. PanelLayout

2.1.1. Front Panel

Figure 2-1 Front Panel

1 -4 LAN port socket (RJ-45). These are where you will connect to devices on y

our

local area network. (adapter, hub, or switch, e.g.)

2.1.2. Rear Panel

Figure 2-2 Rear Panel

PRINT Parallel port connector (25-pins D-

type female). This is where you

connect the shared printer.

WAN WAN port socket (RJ-45). This is where you conne

ct to your Cable or

DSL modem or an Ethernet router.

COM Serial port connector (9-pins D-

type male). This is where you connect

your 56K modem. (This port is also a console port.)

-7-

2.1.3. TopPanel

Figure 2-3 Top Panel

LAN Port 1-4LAN port indicators, Green

. The LED flashes when the LAN port is

sending or receiving data.

WAN WAN port indicator, Green

. The LED flashes when the WAN port is

sending or receiving data.

M1 System status indicators, Orange

. M1 flashes once per second to

indicate the system is functioning properly.

2.1.4. Left Side Panel

Figure 2-4 Left Side Panel

1. Power

Power inlet. This is where you connect the included power adapter.

Note: The included power ad

apter is DC 5V/1A. Using the wrong type

of power adapter may cause damage.

2. Switch Power switch.

2.2. Installation Requirements

The Barricade can be positioned at any convenient place in your office or home. No special

wiring or cooling requirementsare needed. You should, however comply with the following

guidelines:

-8-

lPlace product on a flat horizontal plane.

lKeep product away from any heating devices.

lDo not place product in a dusty or wet environment.

The recommended operational specifications of this product are:

Temperature 0 oC ~ 55 oC

Humidity 5 % ~ 90 %

You should also remember to turn off the power, remove the power cord from the outlet, and

keep your hands dry when you install the hardware.

2.3. Procedure for Hardware Installation

1. Set up LAN connection: Connect an Ethernet cable from your computer’s Ethernet

adapter to one of the LAN ports.

Figure 2-5 Setup of LAN connections for this product.

2. Set up WAN connection: Prepare an Ethernet cable for connecting this product to

your Cable/DSL modem or Ethernet backbone. Figure 2-6 illustrates the WAN

connection.

3. Connecting the Barricade with your printer:Use the printer cable to connect to the

printer port of this product.

-9-

Figure 2-6 Setup of WAN and Printer connections for this product.

4. Power on:

Connect the power cord to power inlet and turn the power switch on. The Barricade

will automatically enter the self-test phase. When it is in this phase, the indicator M1

will light up for about 5 seconds, and then M1 will flash 3 times to indicate that the

self-test operation is complete. Finally, the M1 will continuously flash once per second

to indicate that this product is operating normally.

Altri manuali per Barricade

Indice

Altri manuali SMC Networks Router di rete

SMC Networks

SMC Networks EZ6516TX - annexe 1 Manuale utente

SMC Networks

SMC Networks Barricade SMC7404BRA EU Manuale utente

SMC Networks

SMC Networks EZ Switch SMC-EZ1024DT Manuale utente

SMC Networks

SMC Networks 2585W-G FICHE Manuale utente

SMC Networks

SMC Networks TigerSwitch 100 SMC6724L3 Manuale utente

SMC Networks

SMC Networks KER25U Manuale utente

SMC Networks

SMC Networks Console Manuale utente

SMC Networks

SMC Networks Barricade SMCWGBR14-N Manuale utente

SMC Networks

SMC Networks ADSL2 Barricade SMC7904BRA3 Istruzioni operative e di sicurezza

SMC Networks

SMC Networks EZ Switch SMCGS1610 Manuale utente

SMC Networks

SMC Networks 7901WBRA2 FICHE Manuale utente

SMC Networks

SMC Networks ADSL2 Barricade N Pro SMC7904WBRA-N Manuale utente

SMC Networks

SMC Networks EZ Switch SMCGS5 Manuale utente

SMC Networks

SMC Networks SMCFS501 Manuale utente

SMC Networks

SMC Networks GS1601 Manuale utente

SMC Networks

SMC Networks SMC6824M Manuale di programmazione

SMC Networks

SMC Networks 7904WBRA-N FICHE Guida all'installazione

SMC Networks

SMC Networks SMCWBR14-N5 Manuale utente

SMC Networks

SMC Networks Barricade SMC7908VoWBRA Manuale utente

SMC Networks

SMC Networks 7401BRA V.2 Manuale utente

SMC Networks

SMC Networks 7904WBRB2 Manuale utente

SMC Networks

SMC Networks GS501 Manuale utente

SMC Networks

SMC Networks SMCWEBT-G Manuale utente

SMC Networks

SMC Networks 7004VBR Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza