SMC Networks WBR14-G2 Manuale utente

iii

OMPLIANCES

Federal Communication Commission Interference

Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of

20 cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

IMPORTANT NOTE:

IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to

channels 1 through 11.

OMPLIANCES

Industry Canada Statement

Operation is subject to the following two conditions:

1. this device may not cause interference and

2. this device must accept any interference, including interference that may cause undesired

operation of the device

To prevent radio interference to the licensed service, this device is intended to be operated

indoors and away from windows to provide maximum shielding. Equipment (or its transmit

antenna) that is installed outdoors is subject to licensing.

This device has been designed to operate with an antenna having a maximum gain of 1.5 dBi.

Any antenna having a higher gain is strictly prohibited per regulations of Industry Canada.

The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be

so chosen that the EIRP is not more than required for successful communication.

To prevent radio interference to the licensed service, this device is intended to be operated

indoors and away from windows to provide maximum shielding. Equipment (or its transmit

antenna) that is installed outdoors is subject to licensing.

EC Declaration of Conformity

SMC contact for these products in Europe is:

SMC Networks Europe,

Edificio Conata II,

Calle Fructuos Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despi,

Barcelona, Spain.

Marking by the above symbol indicates compliance with the Essential Requirements of the

R&TTE Directive of the European Union (1999/5/EC). This equipment meets the

following conformance standards:

EN 300 328-1 December 2001 V1.3.1

EN 300 328-2 December 2001 V1.2.1

EN 301 489-1 September 2001 V1.4.1

EN 301 489-17 September 2000 V1.2.1

EN 60950 January 2000

OMPLIANCES

Countries of Operation & Conditions of Use in the

European Community

This device is intended to be operated in all countries of the European Community.

Requirements for indoor vs. outdoor operation, license requirements and allowed channels of

operation apply in some countries as described below:

Note: The user must use the configuration utility provided with this product to ensure the

channels of operation are in conformance with the spectrum usage rules for European

Community countries as described below.

• This device requires that the user or installer properly enter the current country of

operation in the command line interface as described in the user guide, before operating

this device.

• This device will automatically limit the allowable channels determined by the current

country of operation. Incorrectly entering the country of operation may result in illegal

operation and may cause harmful interference to other system. The user is obligated to

ensure the device is operating according to the channel limitations, indoor/outdoor

restrictions and license requirements for each European Community country as described

in this document.

• This device may be operated indoors or outdoors in all countries of the European Community

using the 2.4 GHz band: Channels 1 - 13.

Declaration of Conformity in Languages of the

European Community

English Hereby, SMC Networks, declares that this Radio LAN device is in

compliance with the essential requirements and other relevant provisions

of Directive 1999/5/EC.

Finnish Valmistaja SMC Networks vakuuttaa täten että Radio LAN device

tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä

koskevien direktiivin muiden ehtojen mukainen.

Dutch Hierbij verklaart SMC Networks dat het toestel Radio LAN device in

overeenstemming is met de essentiële eisen en de andere relevante

bepalingen van richtlijn 1999/5/EG

Bij deze SMC Networks dat deze Radio LAN device voldoet aan de

essentiële eisen en aan de overige relevante bepalingen van Richtlijn

1999/5/EC.

French Par la présente SMC Networks déclare que l'appareil Radio LAN device est

conforme aux exigences essentielles et aux autres dispositions pertinentes

de la directive 1999/5/CE

OMPLIANCES

Swedish Härmed intygar SMC Networks att denna Radio LAN device står I

överensstämmelse med de väsentliga egenskapskrav och övriga relevanta

bestämmelser som framgår av direktiv 1999/5/EG.

Danish Undertegnede SMC Networks erklærer herved, at følgende udstyr Radio

LAN device overholder de væsentlige krav og øvrige relevante krav i

direktiv 1999/5/EF

German Hiermit erklärt SMC Networks, dass sich dieser/diese/dieses Radio LAN

device in Übereinstimmung mit den grundlegenden Anforderungen und

den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet".

(BMWi)

Hiermit erklärt SMC Networks die Übereinstimmung des Gerätes Radio

LAN device mit den grundlegenden Anforderungen und den anderen

relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien)

Greek

Italian Con la presente SMC Networks dichiara che questo Radio LAN device è

conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite

dalla direttiva 1999/5/CE.

Spanish Por medio de la presente SMC Networks declara que el Radio LAN device

cumple con los requisitos esenciales y cualesquiera otras disposiciones

aplicables o exigibles de la Directiva 1999/5/CE

Portuguese SMC Networks declara que este Radio LAN device está conforme com os

requisitos essenciais e outras disposições da Directiva 1999/5/CE.

OMPLIANCES

vii

Safety Compliance

Underwriters Laboratories Compliance Statement

Important! Before making connections, make sure you have the correct cord set. Check it

(read the label on the cable) against the following:

The unit automatically matches the connected input voltage. Therefore, no additional

adjustments are necessary when connecting it to any input voltage within the range marked

on the power adapter.

Information for Power Source

This unit is to be used with a class 2 or level 3 external power adapter, approved suitable for

use in North American equipment installation, having an output voltage rating of 9 V DC,

and output current rating of 1.0 A or equivalent. The external AC adapter must be complied

with the requirements of LPS (Limited Power Sources).

Operating Voltage Cord Set Specifications

120 Volts UL Listed/CSA Certified Cord Set

Minimum 18 AWG

Type SVT or SJT three conductor cord

Maximum length of 15 feet

Parallel blade, grounding type attachment plug rated

15 A, 125 V

240 Volts (Europe only) Cord Set with H05VV-F cord having three conductors

with minimum diameter of 0.75 mm2

IEC-320 receptacle

Male plug rated 10 A, 250 V

N11846

OMPLIANCES

viii

Wichtige Sicherheitshinweise (Germany)

1. Bitte lesen Sie diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüs-

sigoder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung.

4. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder

Fallen könnte Beschädigungen hervorrufen.

7. Die Belüftungsöffnungen dienen der Luftzirkulation, die das Gerät vor Überhitzung

schützt. Sorgen Sie dafür, daß diese Öffnungen nicht abgedeckt werden.

8. Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte.

9. Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen kann. Es sollte

auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Strom-

netz trennen. Somit wird im Falle einer Überspannung eine Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das

Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen.

13. Öffnen sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicherheit

nur von authorisiertem Servicepersonal geöffnet werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von

einer qualifizierten Servicestelle zu überprüfen:

a. Netzkabel oder Netzstecker sind beschädigt.

b. Flüssigkeit ist in das Gerät eingedrungen.

c. Das Gerät war Feuchtigkeit ausgesetzt.

d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit

Hilfe dieser Anleitung keine Verbesserung erzielen.

e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f. Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

15. Stellen Sie sicher, daß die Stromversorgung dieses Gerätes nach der EN 60950 geprüft

ist. Ausgangswerte der Stromversorgung sollten die Werte von AC 7,5-8 V, 50-60 Hz

nicht über oder unterschreiten sowie den minimalen Strom von 1 A nicht unterschreiten.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70 dB(A)

oder weniger.

Altri manuali per WBR14-G2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SMC Networks Router wireless

SMC Networks

SMC Networks Barricade g SMC7804WBRA Manuale utente

SMC Networks

SMC Networks Barricade SMC7908VoWBRA Manuale utente

SMC Networks

SMC Networks Barricade SMCWBR14T-G Manuale utente

SMC Networks

SMC Networks Barricade SMCWBR14T-G Manuale utente

SMC Networks

SMC Networks BR14VPN - annexe 1 Manuale utente

SMC Networks

SMC Networks Barricade SMC7908VoWBRA Manuale utente

SMC Networks

SMC Networks Barricade SMC7004ABR Manuale utente

SMC Networks

SMC Networks Barricade SMC7004VWBR Manuale utente

SMC Networks

SMC Networks SMC7904WBRA-N2 Manuale utente

SMC Networks

SMC Networks WBR14S-3GN Manuale utente

SMC Networks

SMC Networks 7004AWBR Manuale utente

SMC Networks

SMC Networks SMC7004WFW Manuale utente

SMC Networks

SMC Networks SMCWBR11S-N Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Guida all'installazione

SMC Networks

SMC Networks WBR14-G3 FICHE Manuale utente

SMC Networks

SMC Networks Barricade SMC7008ABR Manuale utente

SMC Networks

SMC Networks SMCWBR11S-3GN Manuale utente

SMC Networks

SMC Networks Barricade SMCWGBR14-N Manuale utente

SMC Networks

SMC Networks WBR14-G3 FICHE Guida all'installazione

SMC Networks

SMC Networks Barricade SMCWBR14S-3GN Manuale utente

SMC Networks

SMC Networks WBR14S-N2 FICHE Manuale utente

SMC Networks

SMC Networks 7004BR Manuale utente

SMC Networks

SMC Networks SMCBR14 WIRED BARRICADE Manuale utente

SMC Networks

SMC Networks EZ-Stream SMC2304WBR-AG Manuale utente

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

Draytek

Draytek Vigor2120 Series Manuale utente