Smeg CGF01BLUK Manuale utente
ENAR
USER MANUAL
COFFEE GRINDER
We advise you to read this manual carefully, as it contains all the instructions for managing tha appliance’s aestetic and
functional qualities.
For further information on the product: www.smeg.com
www.smeg.com
START
STOP
2
3
1
7
5
6
8
4
1
3
2
1
4
5
10
11
“A” 9
“B”
“C”
F
I
N
E
M
E
D
I
U
M
C
O
A
R
S
E
0
5
10
15
20
25
30
FINE MEDIUM
COARSE
START
STOP
4
8
7
6
14
4
13
15 9a
9b
9a
12
11
“D”
“E”
“F”
“G”
“H”
“I”
“ L”
Important information for the user
Instructions
General information on this user manual, on safety and nal disposal
Description
Appliance description
Use
Information on using your applianc
Cleaning and care
Information for proper cleaning and maintenance of the applianc
Safety instructions
Information
Advice
EN - 1
EN
Dear Customer,
Thank you very much for purchasing the Smeg Line coffee grinder.
By choosing our product, you have opted for a solution in which aesthetics
and innovative technical design offer unique objects, which become part of
the furnishings.
In fact, a Smeg household appliance always co-ordinates perfectly with other
products in the range and, at the same time, can become a design object
for the kitchen.
We hope you fully appreciate the functionalities of your appliance.
Best regards.
SMEG S.p.A.
Model CGF01
Coffee grinder
2 - EN
SAFETY
Essential safety recommendations.
Since the appliance operates with electric current,
the following safety recommendations must be
followed:
•
Do not touch the plug with wet hands.
•
Make sure that the power outlet used is always
freely accessible, because only in this way can
it be unplugged when necessary.
•
To remove the plug from the power outlet, grip
the plug directly. Never pull the cable, it could
be damaged.
•
If the appliance should break down, do not
attempt to repair it.
Switch the appliance off, remove the plug
from the power outlet and contact the Smeg
Technical After-sales centre.
•
If the plug or power supply cable are
damaged, have them replaced exclusively by
the Technical After-sales centre, so as to prevent
all risks.
•
Do not immerse the appliance in water.
•
Attention: disconnect the plug before cleaning.
•
Do not allow the power supply cable to dangle
over the edge of the table or other surface or
to come into contact with hot surfaces.
•
Do not use the appliance for more than 90
seconds consecutively. Leave the appliance
to cool down for approx. 15 minutes before
using it again.
Keep the packaging material (plastic bags,
expanded polystyrene) out of the reach of
children.
•
Do not position the appliance on or in proximity
of electric or gas cookers, or in a heated oven.
•
Verify that there are no foreign objects inside
the coffee grinder.
•
Switch off the appliance and disconnect
from supply before changing accessories or
approaching parts that move in use.
Connect the appliance
Warning!
Make sure that the mains voltage and
the frequency correspond with those indicated on
the data plate on the bottom of the appliance.
Only connect the appliance to a current outlet
installed perfectly with minimum capacity of 10A
and with an efcient earth.
If the plug and power outlet are incompatible,
have the power outlet replaced with a suitable
type by qualied staff.
•
This appliance must not be used by children.
•
Keep this appliance and the cable out of the
reach of children.
•
Children must not play with the appliance.
•
The appliance can be used by persons with
reduced physical and sensory conditions
or lack of experience and knowledge, if
supervised or instructed concerning safe use of
the appliance by a person responsible for their
safety and they understand the risks connected.
•
Disconnect the appliance from the power outlet
before all assembly, disassembly and cleaning
operations
.
Recommendations
EN - 3
EN
Use compliant with destination
•
The appliance is intended for household and
similar use, such as:
- in the kitchen area for the staff of shops,
ofces and other work environments;
- in bed and breakfast and agritourism
accommodation;
- by guests at hotels and motels, and in
residential environments.
•
Other uses, in restaurants, bars and cafes for
example, are improper.
Manufacturer’s liability
The manufacturer declines all liability for damage
undergone by persons and objects due to:
•
use of the appliance different from that
envisioned;
•
user manual has not been read;
•
tampering of individual parts of the appliance;
•
use of non-original spare parts;
•
failure to comply with safety recommendations.
Keep these instructions carefully.
Whenever the appliance is
transferred to other persons, they must also be
given these user instructions.
DISPOSAL
Electrical appliances must not be disposed
of with household waste. The appliances
that have this symbol are subject to
the European Directive 2012/19/EU. All
discarded electric and electronic appliances
must be disposed of separately from household
waste, by taking them to relevant centres
envisioned by the Country. By disposing of
the discarded appliance correctly, damage
to the environment and risks to health will be
avoided. For further information regarding
disposal of the discarded appliance, contact
the Municipal Administration, the Disposal
dept. or the shop where the appliance was
purchased.
Recommendations
4 - EN
DESCRIPTION OF THE
APPLIANCE (Fig. A)
1Motor base
2Coffee bean container (350 g)
3Coffee bean container lid
4Ground coffee container with lid
5Container support plate
6START/STOP button
7Grinding functions selection knob
8Grinding level adjustment lever
9Grinder
10 Cleaning brush
11 Centring lter support
IDENTIFICATION PLATE
The identication plate states the technical
data, serial number, and marking. The
identication plate must never be removed.
BEFORE FIRST USE
(Fig. A)
• Unpack the appliance carefully and remove
all packaging materials and promotional
labels.
• Wash all components, except for the motor
base (1) and the grinder (9), with hot water
and normal washing-up liquid. Rinse all
components thoroughly and dry them before
using them.
The grinder must never be
washed and must always be kept
dry. Clean the grinder with the
cleaning brush provided or with
a hard-bristle brush.
Before use, check that all components
are integral and have no cracks.
ASSEMBLY OF COMPONENTS
(Fig. B-C-D)
• Place the container (2) on the motor
base (1) matching up the two
reference notches “ ” “ ”
on the left side of the motor body (1).
Next rotate the container (2) clockwise until
the two “ ” “ ” indications match.
• Position the lid (3) on the container (2) and
press it down.
• Position the plate (5) on the motor base (1)
in a way to secure it.
• Open the silicone cap of the ground coffee
container (4) and position it on the plate (5).
• Make sure that the rubber dispenser cone
is centred in the hole of the container lid (4)
as shown in Fig. D.
DESCRIPTION OF CONTROLS
(Fig. E-F)
Grinding adjustment lever (8)
The appliance has a lever (8), which allows
to adjust the level of grinding appropriate to
your use:
FINE Fine grinding
MEDIUM Medium grinding
COARSE Coarse grinding
Move the lever to make the indicator (12)
correspond with the desired grinding level.
Description/Assembly/Commands
EN - 5
EN
Quantity of grinding selection knob
(7)
The appliance has 8 pre-set functions and a
manual function, which can be selected using
the knob (7).
Each function corresponds to a predened
quantity of ground coffee.
Knob
icon Quantity
1 Grinding for
single Espresso
2
Grinding for
double Espresso
2 Grinding for 2 cups
4 Grinding for 4 cups
6 Grinding for 6 cups
8 Grinding for 8 cups
10 Grinding for 10 cups
12 Grinding for 12 cups
M Manual function
In relation to the selected quantity, it is advised
to adjust the coffee grain by moving the
indicator (12) as indicated in the table below.
Use Level of
Grinding
indicator
(12)
Functions
knob (7)
Espresso
coffee
machine FINE 1
-
2
Moka
Filter
coffee
machine
MEDIUM
2
4
6
French
Press COARSE
8
10
12
The Manual function (M) can be used at will
with any level of grinding.
USE (Fig. A-E-F-G-H)
Make sure the upper grinder (9A)
is inserted and secured in its seat.
• Insert the plug into the power outlet.
• Lift the lid (3) and introduce the coffee beans
into the container (2).
If the LED located on the knob
blinks, it means that the appliance is
in error condition: beans container
not present or not inserted correctly.
Grinding the coffee into the container
(4)
• Position the powder container (4) on the
plate (5) being careful to open the silicon
cap.
• Select the desired level of grinding by
positioning the indicator (12) on the
gradation desired.
• Select the desired quantity by rotating the
knob (7) and making the red indicator of
the ring match with the desired program:
from “2” to “12”.
• Press the START/STOP button (6) to start
grinding. For all pre-set programs, grinding
will end automatically, excluding the manual
function (M).
• When grinding has been completed,
remove the container (4) from the appliance.
• To withdraw the ground coffee from the
container (4), open it by turning the lid (13)
anti-clockwise and remove it.
Commands/Use
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Smeg Macinacaffè
