Smeg CB2485U Manuale utente

BUILT-IN REFRIGERATOR-FREEZER

CB2485U

IMPORTANT NOTICE-----------------------------------------------------------------------------------------------------------------------------2

APPLIANCES COMPONENTS-------------------------------------------------------------------------------------------------------------------3

INSTALLATION AND OPERATING CONDITIONS OF THE APPLIANCE ----------------------------------------------------------------4

INSTALLATION INSTRUCTION-----------------------------------------------------------------------------------------------------------------6

DOOR REVERSAL---------------------------------------------------------------------------------------------------------------------------------11

BEFORE FIRST USE-------------------------------------------------------------------------------------------------------------------------------13

STORAGE INSTRUCTION-----------------------------------------------------------------------------------------------------------------------15

CONTROLS-----------------------------------------------------------------------------------------------------------------------------------------17

DE-FROSTING-------------------------------------------------------------------------------------------------------------------------------------18

CARE AND CLEANING---------------------------------------------------------------------------------------------------------------------------19

TROUBLESHOOTING----------------------------------------------------------------------------------------------------------------------------20

WARRANTY--------------------------------------------------------------------------------------------------------------------------------------- 21

CONTENT

1. Some provisions in this user manual apply to refrigerating products of different types e.g. (for a refrigerator,

refrigerator-freezer or freezer) The Manufacturer shall not be held liable for damage arising from the failure

to observe the instructions contained in this manual. Please refer to the warranty booklet.

2. Keep this manual for future reference, or to provide to the next user.

3. The appliance operates properly at the ambient temperature 16 ℃（61℉）~32 ℃（90℉). Do not use it

in the conditions that are out of those recommended.

4. When placing, moving or lifting the appliance, do not hold the door handles, do not pull the condenser at the

rear part of the refrigerator and do not touch the compressor unit.

5. When transporting, moving or positioning the appliance, do not tilt it by more than 40°from the vertical

position. Should such a situation occur, the appliance should not be switched on for a minimum 2 hours.

6. Remove the plug from the outlet before any maintenance activity.

7. The “cracking” sound, which the appliance may emit is caused by the expansion and contraction of parts as a

result of temperature variations during its cooling and defrost recycles.

8. For safety reasons never repair the appliance yourself. Repairs carried out by persons who do not have the

required qualifications may result in serious injury for the user of the appliance.

9. Do not refreeze partly thawed products.

10. Do not store beverages in bottles and cans, especially carbonated beverages, in the freezer compartment.

The cans and the bottles may explode.

11. Do not put frozen products, taken out directly from the freezer (candies, ice cubes, etc.) into your mouth,

their low temperature may cause severe frost-bite.

12. Make sure you do not damage the cooling system, by puncturing the refrigerant tubing in the evaporator or

breaking the tubes. The refrigerant is flammable. If the refrigerant comes into contact with the eyes, rinse

them with clean water and call for medical assistance immediately.

13. This appliance is intended for food and beverage storage, do not use it for other purposes.

14. When performing activities, such as cleaning, maintenance or moving, the appliance must be completely

disconnected from power supply (by removing the plug from the wall outlet or turning off the breaker)

15. This appliance should not be used by children under 8 years of age or by persons with physical, mental or

sensory handicaps, or by those who are inexperienced or unfamiliar with the appliance, unless they are

supervised or have been instructed how to safely use the appliance and are familiar with risks associated with

the use of the appliance. Ensure that children do not play with the appliance. Cleaning and maintenance of

the appliance should not be performed by children unless they are 8 years or older and are supervised by a

competent person.

IMPORTANT NOTICES

APPLIANCE COMPONENTS

1. Control panel

2. Air duct panel

3. Glass shelves

4. Crispers

5. Fresh zone

6. Drawers

7. Door bins

Placement of the Refrigerator in cabinetry

•This drawing shows the placement of the refrigerator in the cabinet, the airflow through the entire

cabinet, the platform base that the refrigerator sits on, as well as the cabinet doors as they overlay the

refrigerator doors.

INSTALLATION AND OPERATING CONDITIONS OF THE

APPLIANCE

Connect to the power supply

•This appliance should be connected to AC 120V/60Hz supply socket. The socket must be fitted properly

and must be supplied with a power cord with a 3-prong plug and a 15A fuse.

•It is a legal requirement that the appliance is properly grounded. The manufacturer will not be held

liable for any damage or injury which may result from the failure to fulfill this requirement.

•Do not use adapters, multiple sockets and cords.

•See the serial plate at the lower part of the internal wall of the appliance for detailed specifications**.

Disconnecting the power supply

•Make sure the appliance can be easily disconnected from the outlet, either by pulling the plug out of

the outlet, or by switching off the breaker.

Minimum distances from the heat sources

•from the electric, gas and other ovens - 30 mm / 1 inch,

•from oil or coal fired ovens - 300 mm / 12 inches,

•from built-in ovens - 50 mm / 2 inches

•Use an appropriate insulation panel between them when there is no possibility of ensuring the specified

distances.

Installation before using the appliance for the first time

•Make sure there is enough space around the refrigerator to allow it work properly. A free space of 1cm

(1/2 inch) is required on the rear of the appliance so that the air can be circulated to cool the

compressor and condenser. And 30cm (12 inches) space above the refrigerator.

•Make sure the appliance is placed in level position by adjusting the 2 adjustable front legs.

Shelves

•The fridge shelves can be moved according to the storage requirements within the fridge section

•To move the shelf, lift the rear section and then pull it outwards

•To replace, slide the shelf back into the slot, and then lower the rear section

INSTALLATION AND OPERATING CONDITIONS OF THE

APPLIANCE

Ventilation is the main consideration when installing any refrigeration unit into a custom kitchen.

The heat removed from the cooling and/or freezing compartments needs to be dissipated into the

atmosphere.

Incorrect ventilation can lead to premature compressor failure, excessive power consumption, moisture

buildup and mold, total system failure and will likely invalidate the warranty provided with the appliance.

For products intended to be installed into a cabinet, the following requirements must be met:

Ventilation from underneath through the base of the kitchen cabinet must be set up with the supplied

ventilation grill or an air vent with at least a 31 in2(200 cm2) cross section area.

•Installing the cabinet base air ventilation grill:

•• Cut a hole in the plinth/kick plate of the kitchen cabinet below the refrigerator: 17.64 in. (448 mm) wide

and 2.6 in. (55mm) high.

•• Insert the ventilation grill into the cut out in the cabinet base.

•• Secure the grill with the 4 screws, 1 in each corner.

INSTALLATION INSTRUCTION

IMPORTANT!

An air passageway must be provided in the

top of the cabinet run to allow free air in

and out.

There must be space at the rear of the

cabinet to allow cool air to be drawn into

the condenser.

INSTALLATION INSTRUCTIONS

Unit and Cavity Dimensions

This built-in appliance is completely enclosed by a kitchen cabinet. The cabinet surrounding the appliance must be

designed in accordance with the specified dimensions and must allow sufficient air circulation to ensure correct

operation of the appliance.

Cabinet Door Dimensions

This appliance requires 2 doors. One for the refrigerator section and one for the freezer section. The custom

doors must be at least 5/8” (16 mm) thick and no more than 3/4” (19mm) thick. The space between the top

and bottom doors must be at least 1/8” (3mm), the same as the appliance door space. Similar space is

required between the top door and the cabinet door above the appliance (if applicable) – 1/8” (3mm).

Spacing between the cabinet doors and the existing cabinets should comply with the existing kitchen

cabinets, typically 1/8” (3mm) should be allowed.The cabinet doors must follow the recommended weight

requirements –

Fridge compartment door 37.5 lbs (17 kg)

Freezer compartment door 26.5 lbs (12 kg)

Detailed specs for custom doors for appliance: Specs provided for the width of the appliance doors in the

diagram. Detail for designers/planners.

Fridge 38 13/16” (988 mm)

Freezer 25” (640 mm)

Unit Cavity

Width

21 1/4”

540mm

Width

Min. 22 1/8”

Min. 560mm

Height

6941/64”

1769mm

Height

6923/65” – 6927/32”

1771 –1774mm

Depth

2121/32”

550mm

Depth

Min. 223/64”

Min 560mm

INSTALLATION INSTRUCTION

REQUIRED CAVITY DIMENSION

Push the appliance carefully into the cabinet, make sure

the appliance is centered in the cavity. Follow the steps

below to fit the cabinet door panel, ensuring the door

can be opened and closed properly then tighten the

screws at the top and bottom.

Fitting the cabinet door bracket

Remove the white decorative cover

Fig. 1- by lifting it upwards.

Fig. 2- Obtain the below measurements:

Dimension B= Measure from the underside surface of

cabinet ceiling to the bottom of fixing bracket.

Dimension C= Determine which gap

you need between the cabinet ceiling or panel above.

Often this will align with the adjacent cabinet doors.

Fig. 3 - Fitting the decor door bracket

Subtract C from B and put the fixing bracket (2) in place

using this measurement for vertical position and center

horizontally.

Secure the fixing bracket (2) using screws (1) x8.

Fig. 4 - Fitting the cabinet door

Place the cabinet door onto the appliance door by

inserting adjustment bolts into the slots on the fixing

bracket. Locate the washers and screw the nuts onto the

adjustment bolts. Do not tighten fully yet.

Fig 1

Fig 2

Fig 3

Fig 4

INSTALLATION INSTRUCTION

Indice

Lingue:

Manuali Frigorifero popolari di altre marche

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manuale utente

Sharp

Sharp SJ-BA31IEXW2-EU Manuale utente

CORBERO

CORBERO CC2300MCW Manuale utente

KitchenAid

KitchenAid 2205264 Manuale utente

Stengel

Stengel KU 1101 A++ Manuale utente

NEFF

NEFF KI181 Series Manuale utente

Hoshizaki

Hoshizaki Reach-In Manuale utente

Amana

Amana ASD2524VES00 Manuale utente

BOMANN

BOMANN KGC 213 Manuale utente

Danby

Danby DAR044A1SLDD Istruzioni per il montaggio

Samsung

Samsung RF323TE Manuale utente

Beko

Beko CSA31022 Manuale utente

IKEA

IKEA FROSTIG C 185 E Manuale utente

Electrolux

Electrolux ER 6821 D Manuale utente

True

True TS-28 Manuale utente

Frigidaire

Frigidaire FSC23R5DW9 Manuale utente

Beko

Beko LSP4579W Manuale utente