SNBC BT-UR056 Manuale operativo e di manutenzione

Technical Updates SNBC CONFIDENCIAL

PROGRAMMER

MANUAL

BT-UR056

Embeded Print Unit

V1.0

SHANDONG NEW BEIYANG INFORMATION TECHNOLOGY CO.,LTD

June 2,2006

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 1

Content

Declaration .......................................................................................................................3

1. General Information ....................................................................................................4

1.1 Key Terms.................................................................................................................................................... 4

1.2 Command Format........................................................................................................................................ 4

2. Command set...............................................................................................................5

HT...................................................................................................................................................................... 5

LF ...................................................................................................................................................................... 5

FF....................................................................................................................................................................... 5

CR...................................................................................................................................................................... 6

CAN................................................................................................................................................................... 6

DLE EOT n........................................................................................................................................................ 6

DLE ENQ n....................................................................................................................................................... 8

ESC FF .............................................................................................................................................................. 8

ESC SP n............................................................................................................................................................ 9

ESC ! n .............................................................................................................................................................. 9

ESC $ nL nH.................................................................................................................................................... 10

ESC % n .......................................................................................................................................................... 10

ESC & y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)] .................................................................................. 10

ESC * m nL nH d1... dk................................................................................................................................... 12

ESC–n.............................................................................................................................................................. 13

ESC 2............................................................................................................................................................... 14

ESC 3 n............................................................................................................................................................ 14

ESC = n............................................................................................................................................................ 14

ESC ? n............................................................................................................................................................ 15

ESC @............................................................................................................................................................. 15

ESC D n1…nk NUL........................................................................................................................................ 15

ESC E n ........................................................................................................................................................... 16

ESC G n........................................................................................................................................................... 16

ESC J n ............................................................................................................................................................ 17

ESC L .............................................................................................................................................................. 17

ESC M n .......................................................................................................................................................... 18

ESC R n........................................................................................................................................................... 18

ESC S............................................................................................................................................................... 19

ESC T n............................................................................................................................................................ 19

ESC V n........................................................................................................................................................... 20

ESC W xL xH yL yH dxL dxH dyL dyH......................................................................................................... 21

ESC \ nL nH..................................................................................................................................................... 22

ESC a n............................................................................................................................................................ 22

ESC c 0 n......................................................................................................................................................... 23

ESC c 3 n......................................................................................................................................................... 23

ESC c 4 n......................................................................................................................................................... 23

ESC c 5 n......................................................................................................................................................... 24

ESC d n............................................................................................................................................................ 24

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 2

ESC l n X0l X0h Y0l Y0h X1l X1h Y1l Y1h.................................................................................................. 24

ESC t n............................................................................................................................................................. 25

ESC v............................................................................................................................................................... 25

ESC { n............................................................................................................................................................ 26

FS p n m........................................................................................................................................................... 26

FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n............................................................................... 27

GS FF............................................................................................................................................................... 29

GS ! n............................................................................................................................................................... 29

GS # n.............................................................................................................................................................. 30

GS $ nL nH...................................................................................................................................................... 31

GS ( A pL pH n m............................................................................................................................................ 31

GS * x y d1...d(x × y × 8)................................................................................................................................ 32

GS / m.............................................................................................................................................................. 32

GS :.................................................................................................................................................................. 33

GS B n ............................................................................................................................................................. 34

GS H n............................................................................................................................................................. 34

GS L nL nH...................................................................................................................................................... 34

GS W nL nH .................................................................................................................................................... 35

GS \ nL nH....................................................................................................................................................... 35

GS ^ r t m......................................................................................................................................................... 36

GS a n .............................................................................................................................................................. 36

GS f n............................................................................................................................................................... 38

GS h n.............................................................................................................................................................. 39

①GS k m d1...dk NUL②GS k m n d1...dn..................................................................................................... 39

GS r n............................................................................................................................................................... 41

GS v 0 m xL xH yL yH d1....dk....................................................................................................................... 42

GS w n............................................................................................................................................................. 43

Kanji Control Commands................................................................................................ 43

FS ! n ............................................................................................................................................................... 43

FS &................................................................................................................................................................. 44

FS - n ............................................................................................................................................................... 44

FS .................................................................................................................................................................... 45

FS S n1 n2........................................................................................................................................................ 45

FS W n............................................................................................................................................................. 45

3. Programming Instructions........................................................................................ 46

3.1 General information................................................................................................................................... 46

3.2 Commands application .............................................................................................................................. 46

3.2.1 Initialization............................................................................................................................................ 46

3.3.2 Printing settings and printout（Characters/barcode/bit image）........................................................... 46

3.3.3 Print ........................................................................................................................................................ 48

3.3.4 Status inquiry.......................................................................................................................................... 49

3.3.5 Download bit images.............................................................................................................................. 49

3.3.6 Recommendations on applicable flow for programm............................................................................. 52

APPENDIX A: Code 128 bar code................................................................................... 53

APPENDIX B: Printing mode and it’s transition............................................................57

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 3

Declaration

Information in this manual is subject to change without agreement. Shandong New Beiyang Info-Tech

(Hereinafter referred to SNBC) reserves the right to make any amendments and modifications when

necessary. For the latest information, please contact with SNBC or your local distributor.

Printed in China

Version 1.0

zTechnical Contact Information

In CHINA:

Address: 169 Torch Road, Hi-Tech Zone Weihai, Shandong, CHINA

Hot line: 0086-631-5673777, 5675888, 8008601368

Fax: 0086-631-5673778

P. C.: 264209

Http: // www.newbeiyang.com

E-mail: [email protected]

Version Record

Date Revised

version

Description Drafted/

Reviewer

August 10,2005 V1.00 Primary version Mr. Cong Xinyuan;

Mr.Yang Xiangang

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 4

1. General Information

1.1 Key Terms

Real-time commands – These commands are acted on immediately upon being received by the printer.

Page mode –Under this mode, the printer possesses all data in specified memory and thinks of this as a

virtual page. The page is printed when the printer receives print command either FF or ESC FF;

Standard mode –Standard mode is the default mode of printer, namely line mode. Under this mode, the

printer prints data and feeds paper upon print line buffer full (data is enough for one print line) or

receiving print command like LF;

HRI character – Human Readable Interface;

NV memory– Non-volatile memory in which data stored does not loss when power off.

RAM –Random Access Memory

Motion unit –The motion unit has vertical motion unit and horizontal motion unit, which specify the least

space for vertical motion and horizontal motion.

ASB – Auto status back.

DPI –Print dots per inch (one inch equals to 25.4mm). It is used to identify the resolution of a printer.

Example, 203DPI means 203 print dots per inch. DPI: Dot Per Inch.

1.2 Command Format

1）[Name] The name and function summary.

2）[Format] The command format is expressed in ASCII, Hex and Decimal separately.

3）[Range] The range of variation value is selected for a command.

4）[Default] After initialization of printer with power on, primary value is used in commands.

5）[Description] The detailed functions of command.

6）[Note] Lists items shall be given about attention and main features in use.

7）[Reference] Lists all other commands related to current command.

---> DLE EOT n

---> [Name] Real-time status transmission

---> [Format] ASCII DLE EOT n

Hex 10 04 n

Decimal 16 4 n

---> [Range] 1 ≤n ≤4

---> [Description] Transmits the printer status specified by ‘n’ in real-time.

---> [Note] The printer will return relevant status immediately after receiving this command.

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 5

2. Command set

[Name] Horizontal tab

[Format] ASCII HT

Hex 09

Decimal 9

[Description] Moves the print position to the next horizontal tab position.

[Notes] • This command is ignored unless the next horizontal tab position has been set.

• If the next horizontal tab position exceeds the printing area, the printer sets the

printing position to [Printing area width + 1].

• Horizontal tab positions are set with ESC D.

• If this command is received when the printing position is at [printing area width

+ 1], the printer executes print buffer-full printing of the current line and horizontal

tab processing from the beginning of the next line.

• The default setting of the horizontal tab position for the paper roll is font 0 (12×24)

every 8th character.

• When the buffers of the line is full, the printer executes as follows:

In standard mode, the printer print the data of current line and set the printing position

at the beginning of next line.

In page mode, the printer shifts newline and sets the printing position at the beginning

of next line.

[Reference] ESC D

[Name] Print and feed a line.

[Format] ASCII LF

Hex 0A

Decimal 10

[Description] In standard mode, it prints the data in the print buffers and feeds one line based on

the current line spacing.

[Note] This command sets the print position at the beginning of the line.

In page mode, the printer shift newline and set the position at the beginning of Next line.

But it doesn’t execute the print.

[Reference] ESC 2, ESC 3

[Name] Print and feed paper

[Format] ASCII FF

Hex 0C

Decimal 12

[Description] (1) If the paper is continuous type;

* In page mode print all data in buffers and return to standard mode;

* In standard mode this command is same as LF;

* The print area set by ESC W is recovered to the default;

(2) If the paper is marked type:

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 6

* In page mode prints all data in the print buffers, then it shall not return to standard mode

and not clear the data in the buffers. After the printing, the printer feeds the next label to

printing position. The coordinates in current print buffers are not changed.

* In standard mode this command equals to GS FF when executing mark orientation.

[Notes] This command sets the print position at the beginning of the line.

[Reference] ESC FF, ESC L, ESC S, GS (F, GS FF

[Name] Print and carriage return

[Format] ASCII CR

Hex 0D

Decimal 13

[Description] When automatic line feed is enabled, this command functions the same as LF;

when automatic line feed is disabled, this command is ignored.

[Notes] · Sets the print starting position at the beginning of the lines.

· This command CR is set according to the printer configuration.

[Reference] LF

CAN

[Name] Cancel print data in page mode

[Format] ASCII CAN

Hex 18

Decimal 24

[Description] In page mode, deletes all print data in current print buffers.

[Notes] · This command is enabled only in page mode.

· If data that existed in the previously specified printing area also exists in the currently

specified printing area, it is deleted.

[Reference] ESC L, ESC W

DLE EOT n

[Name] Real-time status transmission

[Format] ASCII DLE EOT n

Hex 10 04 n

Decimal 16 4 n

[Range] 1 ≤n ≤4

[Description] Transmits the printer status specified by n in real-time, according to the following

parameters:

n = 1: Transmit off-line/on-line status

n = 2: Transmit printer status

n = 3: Transmit printer status

n = 4: Transmit paper sensor status

[Notes] · The status is transmitted whenever the command is received.

· This command should not be used within the data sequence of another

command that consists of 2 or more bytes.

· Even though the printer is not selected with ESC = (select peripheral device),

this command is effective.

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 7

· The printer transmits the current status. Each status is represented by one-byte data.

· The printer transmits the status without confirming whether the host computer

can receive data.

· The printer executes this command upon receiving it.

· The command is enabled only for serial interface printer. In any status the printer

executes this command upon receiving it.

n = 1: Printer on-line/off-line status

Bit 0/1 Hex Decimal Function

0 0 00 0 Fixed to 0

1 1 02 2 Fixed to 0

2 0 00 0 Fixed to 0

3 0 00 0 On-line

1 08 8 Off-line

4 1 10 16 Fixed to 0

5 0 00 0 Fixed to 0

0 00 0 The state of printer is normal6

1 40 64 The state of printer is abnormal

7 0 00 00 Fixed to 0.

n = 2: Printer status

Bit 0/1 Hex Decimal Function

0 0 00 0 Fixed to 0

1 1 02 2 Fixed to 1

0 00 0 Top cover is closed2

1 04 4 Top cover is open

0 00 0 Without using the FEED button3

1 08 8 Press down the FEED button

4 1 10 16 Fixed to 1

5 0 00 0 Fixed to 0

0 00 0 The printer status is normal6

1 40 64 The state of printer is abnormal

7 0 00 0 Fixed to 0

n = 3: Printer status

Bit 0/1 Hex Decimal Function

0 0 00 0 Fixed to 0

1 1 02 2 Fixed to 1

2 Fixed to 0

3 Fixed to 0

4 1 10 16 Fixed to 1

0 00 0 Top cover is closed5

1 20 00 Top cover is open

0 00 0 The Printhead temperature6

1 40 64 The Printhead temperature

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 8

7 0 00 0 Fixed to 0

n = 4: Paper transmission status

Bit 1/0 Hex Decimal Function

0 0 00 0 Fixed to 0

1 1 02 2 Fixed to 1

0 00 0 Paper end2,3

1 0C 12 Paper adequate

4 1 10 16 Fixed to 1.

0 00 0 Paper present5,6

1 60 96 Paper end

7 0 00 0 Fixed to 0

[Reference] DLE ENQ, GS a, GS r

DLE ENQ n

[Name] Real-time request to printer

[Format] ASCII DLE ENQ n

Hex 10 05 n

Decimal 16 5 n

[Range] 1 ≤n ≤2

[Description] Responds to a request from the host computer. n specifies the requests as follows:

n Request

1Recover from an error and restart printing from the line where the error occurred

2Recover from an error and clear the data in the receiving and printing buffers

[Notes] · This command is effective only when mark checkout has error or paper is end.

· In Serial interface mode, the printer starts processing data upon receiving this

command.

· In Parallel interface model, this command can not be executed when the printer is busy.

· This command should not be contained within another command that consists

of two or more bytes.

· Even though the printer is disabled with ESC = (Select peripheral device), the error

recovery functions are effective.

[Reference] DLE EOT

ESC FF

[Name] Print data in page mode

[Format] ASCII ESC FF

Hex 1B 0C

Decimal 27 12

[Description] In page mode, prints all buffered data in the printing area collectively.

[Notes] · This command is enabled only in page mode.

· In using labels, the command shall not execute label orientation after the printing.

· After printing, the printer does not clear the buffered data, don’t change

setting values for ESC T and ESC W, and the position for buffering characters.

[Reference] FF, ESC L, ESC S

Technical Updates SNBC CONFIDENCIAL

Shandong New Beiyang Information Technology Co.,Ltd. Page 9

ESC SP n

[Name] Set right-side character spacing

[Format] ASCII ESC SP n

Hex 1B 20 n

Decimal 27 32 n

[Range] 0 ≤n ≤255

[Description] Sets the character spacing for the right side of the character to [n × 0.125mm(n × 0.0049

inches).

[Notes] · When characters are magnified, the character spacing is n times normal value.

· This command sets values independently in each mode (standard and page modes).

[Default] n = 0

ESC ! n

[Name] Select print mode(s)

[Format] ASCII ESC ! n

Hex 1B 21 n

Decimal 27 33 n

[Range] 0 ≤n ≤255

[Description]

Selects print mode(s) using n as follows:

Bit 1/0 Hex Decimal Function

0 00 0 If the printer use chinese font, it is disabled.

If the printer use west font, setting character is font 0.

1 01 1 If the printer use chinese font, it is disabled.

If the printer use western font, setting character is font 1.

1,2 Undefined.

0 00 0 Emphasized mode not selected3

1 08 8 Emphasized mode selected

0 00 0 Double-height mode not selected4

1 10 16 Double-height mode selected

0 00 0 Double-width mode not selected5

1 20 32 Double-width mode selected

6 Undefined

0 00 0 Underline mode not selected7

1 80 128 Underline mode selected

[Notes] · When both double-height and double-width modes are selected, quadruple size

characters are printed.

· The printer can underline all characters, but can not underline the space set by

HT or 90° clockwise rotated characters.

· The thickness of the underline is that selected by ESC -, regardless of the

character size.

· All the characters on the line are aligned at the baseline.

· ESC E can also turn on or off emphasized mode. However, the setting of the

last received command is effective.

· ESC G functions same as emphasized mode. However, the setting of the last

received command is effective.

Altri manuali per BT-UR056

Indice

Altri manuali SNBC Etichettatrice

SNBC

SNBC BTP-L580 Manuale utente

SNBC

SNBC BT-UR056 Manuale del proprietario

SNBC

SNBC BTP-3200E Manuale del proprietario

Manuali Etichettatrice popolari di altre marche

Brother

Brother P-Touch 2420PC Manuale utente

newell

newell Dymo LabelManager 210D Manuale utente

Brother

Brother TD-4000 Manuale utente

U-Line

U-Line BROTHER H-8754 Manuale utente

Tharo Systems

Tharo Systems H-435+ Manuale utente

Brother

Brother E300 Manuale utente

Godex

Godex RT700 SERIES Manuale utente

ID Technology

ID Technology 252 Manuale utente

Labelmate

Labelmate MC-11 Manuale utente

CAB

CAB XD4M/300 Manuale utente

Avery Dennison

Avery Dennison Pathfinder 6057 Manuale di servizio

Brother

Brother P-touch PT-9700PC Manuale utente

TSC

TSC PEX1000 Series Manuale utente

Adkins

Adkins Label Master Manuale utente

Epson

Epson LabelWorks LW-400 Manuale utente

Primera

Primera 510212 Manuale utente

Brady

Brady BradyPrinter S3100 Manuale utente

DuraLabel

DuraLabel LabPRO Manuale utente