SOARNEX EG210-10-2F Manuale utente
EG210 Series
L2 Smart Managed Switch
Rev. 1.1 Sep. 2018
Quick Installation Guide
EG210-10-2F
EG210-28-4C
EG210-52-4C
EN
Contents of Packing
Open the shipping carton and carefully unpack its
contents. The carton should contain the following items.
1. EG210 series L2 Smart Managed Switch x 1
2. AC Power Cord x 1
3. Rubber Footpads x4, Screw x 8
4. Rack Mount Kit x 1
5. Quick Installation Guide x1
♦Install the Switch in a suitable temperature / humidity
environment.
♦ The power outlet should be within 1.82 meters (6 feet) of
the Switch.
♦ Visually inspect the power cord to make sure that it’s
secured fully to AC Power.
♦ Make sure that there is proper heat dissipation and
adequate ventilation around the Switch.
!NOTE:
♦ Do not place any heavy objects on the Switch.
♦ Users can check for more technical specications at
http://www.soarnex.com
EN
5. Plug the power cord into the power socket of the
Switch.
6. Keep enough ventilation space between the Switch
and surrounding objects.
Hardware Installation
1. Attach the rubber
footpads to the recessed
areas on the bottom of
the Switch.
2. Place the Switch on a flat
desk or shelf.
3. Attach the mounting
brackets on the both
sides of the Switch and
secure them with the
screws.
4. Then, mount the Switch
to a rack with the screws.
EN
Conguration
Default User Name and Password of the Switch are
“admin”.
You can configure the Switch by entering the User
Name/Password and IP Address via WEB platform.
After you’ve modified the configuration, the change
ONLY saves in a running configure in the RAM. You
need to click “Save Settings to Flash button” to save the
configuration from the RAM to FLASH.
2. Recovering Back to Factory Default Configuration
If you’ve forgotten the User Name or Password or
IP Address which has been changed (or if you do
not install the Switch Utility and do not know the IP
Address), and then you can reset it to factory default
settings through reset button.
Open your web browser and
enter http://192.168.1.1 (the
factory default IP address) to
access the WEB platform.
1. Logging the Switch via browser
EN
LED Indicators
EG210-28-4C
EG210-10-2F
EG210-52-4C
There are few steps for reset button behavior
1. Push reset button for 1~5 seconds and release the
button for DUT Reboot.
2. Push reset button for 6~10 seconds and release
the button for Factory Reset.
(LED light amber for 2 seconds)
3. Push reset button >11 seconds and release button
for boot loader mode.
(LED lights green for 2 seconds)
4. If all imaged are failed, entering to loader mode
automatically.
EN
LED Indicator Color Status Description
Power Green
Green solid Power on
Blinking
The switch is performing a
system self-test
(not for EG210-10-2F)
O Light o Power o
L/A
(Link/ Act)
RJ-45port
Amber
Amber
solid
When there is a secure
connection (or link) to
10/100Mbps Ethernet
device at any of the ports
Amber
blinking
When there is reception or
transmission of data
occuring at 10/100 Mbps
Green
Green
solid
When there is a secure
connection (or link) to
1000Mbps Ethernet device
at any of the ports
Green
blinking
When there is reception or
transmission of data
occuring at 1000 Mbps
O Link o No Link
L/A
(Link/Act)
SFPport
Amber
Amber
Solid
When there is a secure
connection (or link) to
100Mbps Ethernet
device at any of the ports
Amber
blinking
When there is reception or
transmission of data
occuring at 100Mbps
Green
Green
solid
When there is a secure
connection (or link) to
1000Mbps Ethernet
device at any of the ports.
Green
blinking
When there is reception or
transmission of data
occurring at 1000Mbps
O Light o No link
EN
Declaration of Conformity
SOARNEX TECHNOLOGY CORPORATION
3F., NO.158, RUIHU ST., NEIHU DIST., TAIPEI CITY11494, TAIWAN (R.O.C)
Product Information
Model Number: EG210-10-2F, EG210-28-4C, EG210-52-4C
Product Name: 10 Port Gigabit Managed Switch (EG210-10-2F)
28 Port Gigabit Managed Switch (EG210-28-4C)
52 Port Gigabit Managed Switch (EG210-52-4C)
Trad Name: SOARNEX
Safety: EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EMC: EN 55032:2012+AC: 2013 (CISPR32:2012) (Class A)
EN 61000-3-2: 2014
EN 61000-3-3:2013
EN 55024:2010
AS/NZS CISPR 32:2013
Those products are here with conrmed to comply with the Directives.
Directives: EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
WEEE Directive 2012/19/EU
REACH Regulation (EU) No. 1907/2006
Low Voltage Directive 2014/35/EU
Person is responsible for this declaration.
Place of Issue: TAIPEI, TAIWAN (R.O.C)
Date: Sep. 30, 2018
Name: Signature:
Title:
Li, Yi Wu
Director
EN
FCC Warning
CE Mark Warning
Declaration
This is a Class A product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures.
This product is here with conrmed to comply with Directive of 2004/108/EC and
2006/95/EC. I here by declare that the products and devices mentioned above
are consistent with the standards and provisions of the guidelines.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this user’s guide, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interfence at his own expense. Change
or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equirments.
1. The miniGBIC ports should use UL listed Optical Transceiver product, Rated
Laser Class 1.3.3Vdc.
CAUTION
僅适用于海拔2000米以下地區安全使用
Copyright © 2018 SOARNEX Technology Corp.
Contents are subject to change without prior notice.
Document is also available on SOARNEX Website.
29072466EG210*2
Rev. 1.1 Sep. 2018
二層智慧管理型交換機
EG210系列
快速安裝指南
EG210-10-2F
EG210-28-4C
EG210-52-4C
中
打開包裝盒, 你的包裝內含有這些:
1. EG210系列二層智慧管理型交換机 x 1
2. 交流電源線x 1
3. 橡膠腳墊x 4, 螺絲x 8
4. 机架安裝架(套)x 1
5. 快速安裝指南x 1
包裝清單
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali SOARNEX Interruttore
