10
WINDOWS PC OR WINDOWS EMBEDDED
HID (PERIPHERALS) MODE
To pair the CHS with the PC or PDA:(required only the first time you connect)
1. Power on the CHS and scan this barcode. The CHS will beep 3 times.
2. Turn on Bluetooth on your PDA or PC and start a device search.
3. Select Socket CHS. If prompted for a passkey, enter 0000 (four zeroes). If prompted
to select services, select Input Device.
4. After the CHS connects and is ready to scan barcodes, it will beep once.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new device, you must first unpair the CHS. See page 4.
BLACKBERRY OS
SPP MODE
SocketScan 10 software works with BlackBerry OS 5.0.0.714 or later for Bold 9700.
Other phones may be compatible. For instructions for the Bold 9900, please visit:
http://www.socketmobile.com/pdf/data-collection/chs-7ci_blackberry-9900.pdf
To install the software: On your phone, open http://www.socketmobile.com/blackberry
Follow the instructions to download and install the software.
To pair the CHS with the phone: (required only the first time you connect)
1. Power on the CHS and scan this barcode. The CHS will beep 3 times.
2. Use the phone’s Bluetooth software to start a device search.
3. Select Socket CHS. If prompted for a passkey, enter 0000 (four zeroes).
4. In the Home screen, click Downloads | SocketScan 10. If prompted to grant trusted
application status, click Yes.
5. Click Menu | Socket EZ Pair. Click 1D Scanner. If prompted, select your CHS.
6. After they pair and connect, the CHS will beep once to confirm the connection, then
beep twice to signal a disconnection. Click Menu | Close to close Socket EZ Pair.
7. SocketScan 10 will try to connect to the CHS. If asked to confirm, click Yes. After the
CHS connects and is ready to scan barcodes, it will beep once.
8. Close Socket EZ Pair by clicking Menu | Close. The CHS registration screen will
appear. Follow the instructions to register your CHS.
Now you are ready to scan barcodes, see instructions on page 4.
