Softing SmartLink HW-DP Manuale utente

smartLink HW-DP

User Guide

Version: EN-092023-1.30

Softing Industrial Automation GmbH

Richard-Reitzner-Allee 6

85540 Haar / Germany

https://industrial.softing.com

Disclaimer of liability

The information contained in these instructions corresponds to the technical status at the time of printing of it and is passed on with the

best of our knowledge. Softing does not warrant that this document is error free. The information in these instructions is in no event a

basis for warranty claims or contractual agreements concerning the described products, and may especially not be deemed as warranty

concerning the quality and durability pursuant to Sec. 443German Civil Code. We reserve the right to make any alterations or

improvements to these instructions without prior notice. The actual design of products may deviate from the information contained in

the instructions if technical alterations and product improvements so require.

Trademarks

HART is a registered mark of the FieldComm Group, Texas, USA.

OPC UA is a registered trademark of the OPC Foundation.

PROFIBUS is a registered trademark of PROFIBUS Nutzerorganisation e.V. (PNO)

OpenSource

To comply with international software licensing terms, we offer the source files of open source software used in our products. For details

see https://opensource.softing.com/

If you are interested in our source modifications and sources used, please contact: info@softing.com

Scan the QR code to find the latest documentation on the product web page under Downloads.

+ 49 89 4 56 56-340

info.automation@softing.com

support.automation@softing.com

https://industrial.softing.com/support/support-form

Version EN-092023-1.30 3

Table of Contents

Chapter 1 .................................................................................... 5

About this guide

........................................................................................................... 51.1 Read me first ........................................................................................................... 51.2 Target audience

........................................................................................................... 51.3 Typographic conventions

........................................................................................................... 61.4 Document history

........................................................................................................... 61.5 Related documentation and videos

........................................................................................................... 61.6 Document feedback

Chapter 2 .................................................................................... 7

About smartLink HW-DP

........................................................................................................... 72.1 Intended use ........................................................................................................... 72.2 Supported features

........................................................................................................... 72.3 System requirements

........................................................................................................... 82.4 Technical data........................................................................................................... 92.5 Safety precautions

........................................................................................................... 92.6 Real-time clock

........................................................................................................... 102.7 LED status indicators

........................................................................................................... 11

Status LEDs startup phase

2.7.1 ........................................................................................................... 11

Status LEDs – factory mode

2.7.2 ........................................................................................................... 12

Status LEDs – normal mode

2.7.3

Chapter 3 .................................................................................... 13

Installation

........................................................................................................... 133.1 Hardware installation

........................................................................................................... 13

Mounting and dismounting

3.1.1 ........................................................................................................... 14

Connection diagrams

3.1.2 ........................................................................................................... 14

PROFIBUS DP connector

3.1.3 ........................................................................................................... 15

Power and alarm connectors

3.1.4 ........................................................................................................... 16

Installation positions

3.1.5 ........................................................................................................... 17

Connecting to the network

3.1.6 ........................................................................................................... 17

Powering up the device

3.1.7 ........................................................................................................... 18

Resetting the device

3.1.8 ........................................................................................................... 213.2 Software installation

........................................................................................................... 223.3 Commissioning

........................................................................................................... 22

Prerequisites

3.3.1 ........................................................................................................... 22

Changing the IP address of a smartLink HW-DP

3.3.2 ........................................................................................................... 24

Setting the IP address of your PC

3.3.3 ........................................................................................................... 25

3.3.4 ........................................................................................................... 25

Configuring PROFIBUS

3.3.5

Chapter 4 .................................................................................... 26

Working with smartLink HW-DP

........................................................................................................... 264.1 User interface

........................................................................................................... 26

General functions

4.1.1

Version EN-092023-1.30

Table of Contents

........................................................................................................... 26

Information

4.1.2 ........................................................................................................... 28

Settings

4.1.3 ........................................................................................................... 40

Diagnosis

4.1.4 ........................................................................................................... 44

PROFIBUS

4.1.5 ........................................................................................................... 47

HART IP

4.1.6 ........................................................................................................... 48

OPC UA

4.1.7 ........................................................................................................... 49

MQTT

4.1.8 ........................................................................................................... 504.2 Connecting to Emerson AMS Device Manager

........................................................................................................... 50

Using Emerson AMS

4.2.1 ........................................................................................................... 554.3 Connecting to PACTware

........................................................................................................... 55

PROFIBUS

4.3.1 ........................................................................................................... 58

HART

4.3.2 ........................................................................................................... 584.4 Connecting to Simatic PDM

........................................................................................................... 58

Prerequisites

4.4.1 ........................................................................................................... 59

Connecting to SIMATIC PDM

4.4.2 ........................................................................................................... 634.5 Connecting to Netilion

........................................................................................................... 644.6 Connecting to OPC UA clients

........................................................................................................... 66

Data type conversion

4.6.1 ........................................................................................................... 684.7 Defining address spaces

Chapter 5 .................................................................................... 69

Declaration of conformity

Chapter 6 .................................................................................... 70

Glossary

Chapter 1 - About this guide

Version EN-092023-1.30 5

1 About this guide

1.1 Read me first

Please read this guide carefully before using the device to ensure safe and proper use. Softing does not

assume any liability for damages due to improper installation or operation of this product.

This document is not warranted to be error-free. The information contained in this document is subject to

change without prior notice. To obtain the most current version of this guide, visit the product website.

1.2 Target audience

This guide is intended for experienced operation personnel and network specialists responsible for

configuring and maintaining field devices in process automation networks. Before installing and operating

the smartLink HW-DP make sure that you have read and fully understood the safety requirements and

working instructions in this guide.

1.3 Typographic conventions

The following conventions are used throughout Softing customer documentation:

Keys, buttons, menu items, commands and other

elements involving user interaction are set in bold font

and menu sequences are separated by an arrow

Open Start

Control Panel

Programs

Buttons from the user interface are enclosed in

brackets and set to bold typeface

Press [Start] to start the application

Coding samples, file extracts and screen output is set

in Courier font type

MaxDlsapAddressSupported=23

Filenames and directories are written in italic

Device description files are located in C:

\<Application name>\delivery\software\Device

Description files

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in

damage or injury.

Note

This symbol is used to call attention to notable information that should be followed during

installation, use, or servicing of this device.

Hint

This symbol is used when providing you with helpful user hints.

smartLink HW-DP - User Guide

6Version EN-092023-1.30

1.4 Document history

Document version

Changes since last version

1.00

first version

1.01

minor editorial changes

1.02

minor editorial changes

1.10

Chapter added on connecting to PROFIBUS devices via OPC UA and connecting

to HART devices via FDT/DTM added.

1.10-1

Description on how to register a license added to Chapter Licensing .

1.20

New password rules and description on how to connect to PROFIBUS

devices via MQTT to plantPerfect Monitor added.

Section PROFIBUS DP connector added.

1.20-1

Support for HART IP RIOs updated.

1.20-2

Password description for login to user interface changed.

1.20-3

Support for Pepperl+Fuchs HART IP RIO LB8105.

1.21

Description of PROFIBUS bus parameter view with project settings and effective

settings added. Adaptation of guide to new features of SW Version 1.21

1.30

Support for E+H Netilion and the FieldEdge SGC500 gateway

Extended HART-IP Server to additionally provide information of the remote I/O

level

Provide PROFIBUS network and device statistics over MQTT

1.5 Related documentation and videos

See the following links for additional and related product information:

smartLink DTM User Guide

Video tutorial - Integrating and using Softing smartLink HW-DP

1.6 Document feedback

We would like to encourage you to provide feedback and comments to help us improve the

documentation. You can write your comments and suggestions to the PDF file using the editing tool in

Adobe Reader and email your feedback to support.automation@softing.com.

If you prefer to write your feedback directly as an email, please include the following information with

your comments:

document name

document version (as shown on cover page)

page number

Chapter 2 - About smartLink HW-DP

Version EN-092023-1.30 7

2 About smartLink HW-DP

The Softing smartLink HW-DP gateway provides access to the communication system and connects the

higher-level network structure with the field level.

The default configuration allows for a start-up in only a few minutes. In order to prevent network

disruptions by unauthorized configuration changes, all configuration functions are protected by user

administration.

2.1 Intended use

The smartLink HW-DP is designed to be used as a secure access point to PROFIBUS networks. Any other

use is deemed non-intended use.

CAUTION

Do not use this device in hazardous areas! See Section Specifications for permissible ambient

conditions.

Note

Installation and operation of the smartLink HW-DP must be performed by qualified personnel

only.

2.2 Supported features

smartLink HW-DP supports the following features:

parameter setting of HART devices connected to PROFIBUS DP networks via HART IP and FDT/DTM

parameter setting of PROFIBUS DP devices via FDT/DTM and Simatic PDM

provides process data, asset and diagnostic information of PROFIBUS devices via OPC UA

provides asset and diagnostic information of PROFIBUS devices for plantPerfect Monitor

2.3 System requirements

To parametrize PROFIBUS and HART devices with your smartLink HW-DP you will need:

24V power supply

PC with web browser

Ethernet cable

PROFIBUS cable

smartLink HW-DP - User Guide

8Version EN-092023-1.30

2.4 Technical data

Hardware

Processor: INtel Cyclone V SoC with dual core ARM Cortex-A9

Status LEDs: PWR, RUN, ERR, BUS

Real-Time Clock: Real-time clock with buffering, setting time via browser

or by NTP server

Interfaces

Ethernet: 1 xIEEE 802.3 10BASE-T, 100Base-TX, 1000Base-T, connector RJ4

PROFIBUS DP: 1 segment with RS485 physical layer, connector 90-pin

sub-D socket

Supported communication

protocols

HART IP, PROFIBUS DP

Supported PROFIBUS remote IOs

Siemens:

T 200SP: 155-6BU01-0CN0

ET 200iSP: 152-1AA00-0AB0

ET 200M: 153-2BA10-0XB0

ABB:

S800: CI801, CI840, CI840A

S900: CI920N, CI920S

Pepperl+Fuchs:

LB: LB8105, LB8106, LB8109

FB: FB8206, FB8209

R.Stahl:

iS1+: CPM 9440/15-01-11

Turck:

BL20: BL20-E-GW-DP, BL20-GW-DPV1

excom: GDP 1,5

WAGO:

I/O System 750: 750-333, 750-833

Supported HART IP IO modules

Siemens:

ET 200SP: 134-6TD00-0CA1, 135-6TD00-0CA1

ET 200iSP: 134-7TD00-0AB0, 135-7TD00-0AB0, 134-7TD50-0AB0, 138-

7FA00-0AB0

ET 200M: 332-8TF01-0AB0, 331-7TF00-0AB0, 331-7TF01-0AB0, 331-

7TB00-0AB0, 332-8TF00-0AB0

ABB:

S800: AI815, AO815, AI845, AO845A, AI895, AO895

S900: AI930N, AO930N

Pepperl+Fuchs:

LB: LB3002, LB3102, LB3103, LB3105, LB4002, LB4005, LB4102, LB4105,

LB3005A2, LB3006A, LB3106A, LB4106A, LB7104A FB: FB3202B1,

FB3202B2, FB3205B2, FB3205B3, FB3302B2, FB3305B2, FB4202B2,

FB4202B3, FB4205B2, FB4205B3, FB4205C2, FB4302B2, FB7204B3,

FB7304B3

R.Stahl:

iS1+: AIM 9461/12-08-11, AOM 9466/12-08-11, AUM 9468/32-08-11

Turck:

BL20: BL20-2AIH-I, BL20-2AOH-I

excom: AIH40Ex, AOH40Ex

WAGO:

I/O System 750: 750-484, 75x-842

Supported HART-IP Applications

Emerson AMS Device Manager V14.1.1, V14.5

Endress + Hauser Netilion (FieldEdge SGC500)

Supported FDT Applications

PACTware, Endress + Hauser FieldCare

Chapter 2 - About smartLink HW-DP

Version EN-092023-1.30 9

Dimensions (H x W x D) Weight

120 mm x 28 mm x 110 mm

Weight

about 430g

Power Supply

18 VDC ... 32 VDC; SELV/PELV power supply mandatory, typical input

current: 200 mA, maximum input current: 1 A (allowing for in-rush

current at switch-on)

Typical Power Loss

5 W

Operating Temperature

-40 °C ... +65 °C (see also Section Installation Positions )

Storage Temperature

-40 °C ... +85 °C

Relative humidity

10 % ... 95 %, non-condensing

Cooling

Convection, no fan

Mounting

DIN rail 35 mm

Protection

IP20

Altitude

intended use must not exceed 2000 m in altitude

Usage location

indoor use only; no direct sunlight

2.5 Safety precautions

CAUTION

During operation, the device's surface will be heated up. Avoid direct contact. When servicing,

turn off the power supply and wait until surface has cooled down.

CAUTION

The electronic components of the smartLink HW-DP are sensitive to electrostatic discharges.

Damages due to electrostatic discharge can lead to premature failure of components or

intermittent faults at a later stage. Before installing the smartLink HW-DP, divert the

electrostatic discharge away from your body and the tools used.

Note

Do not open the housing of the smartLink HW-DP. It does not contain any parts that need to

be maintained or repaired. In the event of a fault or defect, remove the device and return it to

the vendor. Opening the device will void the warranty!

2.6 Real-time clock

A real-time clock is located on the device, which is used to validate the temporal validity when using

certificates. The real-time clock is buffered so that the real-time clock continues to run in the event of a

brief power failure. The buffer time is limited and depends on various parameters (ambient temperature,

duration of use, ...) and can range from a few hours to several days.

During the initial installation and if the power failure lasts longer than the buffer time, the RTCs are set

using a browser via the web server (see corresponding section: Setting the RTC via browser).

Therefore, a problem with the validity of a certificate can indicate that the real-time clock is not set. It is

recommended to use a time server in the network (NTP server), then the device automatically fetches the

current time (see corresponding section: Activating the NTP server).

smartLink HW-DP - User Guide

10 Version EN-092023-1.30

2.7 LED status indicators

smartLink HW-DP has four device status LEDs and two RJ45 connection status LEDs on the front:

PWR

power supply - refer to next section

RUN

running - refer to next section

ERR

error - refer to next section

BUS

configuration - displays configuration upload - refer to next section

The device status LEDs are permanently on or flash in different colors and frequencies as indicated below:

Symbol

Color

Lighting

none

off

red

permanent

green

permanent

red

flashing (1 Hz)

red

flashing quickly (5 Hz)

green

flashing (1 Hz)

green

flashing slowly (0.5 Hz)

green

flashing quickly (5 Hz)

orange (red/green)

permanent

orange (red/green)

green permanent + red flashing (1 Hz)

The RJ45 status LEDs indicate the following behaviour:

web server port LEDS

Colour

Behaviour

green

ON when port has an active link

yellow

FLASHING when there is traffic on the port

Altri manuali per smartLink HW-DP

Indice

Altri manuali Softing Attrezzature industriali

Softing

Softing smartLink HW-DP Manuale utente

Manuali Attrezzature industriali popolari di altre marche

ABB

ABB Unifix AD Manuale

Mark 7

Mark 7 Evolution Manuale utente

Husky

Husky HyPET Manuale utente

bora

bora PM-1800 Manuale utente

Grizzly

Grizzly T32428 Manuale utente

Siemens

Siemens 8MF1 Series Manuale utente

ABB

ABB HT610965 Manuale utente

ABB

ABB SafeLink Manuale utente

Phoenix

Phoenix PHX-150 Manuale utente

ABB

ABB A165-L32 Manuale utente

ABB

ABB HT842936 Manuale utente

Rioned

Rioned UrbanJet Manuale utente

Hermetica

Hermetica 10 Series Manuale utente

HORNER

HORNER OEE Solution Manuale utente

Hammerhead

Hammerhead HG375 Manuale utente

SCHUNK

SCHUNK VERO-S NSE-A3 138 Istruzioni utente

ABB

ABB HT566657 Manuale utente

Webasto

Webasto GSE CAN Manuale utente