Sojet ELFIN ID Manuale utente
Edition: E1D20150415
High Resolution Inkjet Printer
User Manual
XiaMen Sojet Electronics Co.,Ltd.
IMPORTANT
To ensure the best printing quality, we recommend using only our specified cartridges and
the corresponding accessories. Any malfunction or poor printing quality caused by improper
use of other kinds of inks or accessories will be not be guarranteed.
Safety Precautions
There is high voltage inside the machine when it is live. Maintenance or disassembly by
unqualified or unauthorized person is strictly prohibited, so as not to cause any accident.
Machine must be reliably grounded by connecting the grounding wire for the machine during
equipment setup. Unreliable grounding will result in machine failure that the machine cannot
work normally.
Do not expose ink to direct sunlight or high temperature (35℃above). The heat of direct sun-
light or high temperature will affect ink’s storage life and print quality.
If you get ink spill on the eyes or skin during use, please clean your eyes or skin by clean
water.
Ink leakage inside printer can result in burnout damage to the machine. Switch off the
machine and unplug it from power outlet when there’s ink leakage inside printer. Contact
qualified service technician for test and repair.
Warning Signs
Caution: The sign “ ” indicates information for caution of possible damage to hardware
of inkjet printer or data loss.
Attention: The sign “” indicates important notes helpful for your trouble-free operation
of the machine.
Content
Introduction
06 Chapter One: Important Precautions for Using
06 1.1 Important Setup Precautions
6 1.2 Important Operation Precautions
7 Chapter Two: Setup and Installation Instructions
8 2.1 Parts List
9 2.2 Deviceinstallation
09 2.2.1 Side printing installation
9 2.2.2 Down printinginstallation
10 2.2.3 Springback mechanism installation(optional)
11 Chapter Three: DeviceIntroduction
11 3.1 Controller Introduction
11 3.2 Printer head Introduction
12 3.3 Technical Specifications
13 Chapter Four: How to Use the Printer and the Check Work before/afterUse
13 4.1 How to Use the Printer
13 4.2 Check Work before Use
13 4.3 Check Work afterUse
14 Chapter Five: Printer Operation Instructions
14 5.1 Main Interface
15 5.2 Printing Management
15 5.2.1 Find/Preview Data
15 5.2.2 Start Printing / Printing Report
15 5.2.3 Printing Delay
16 5.2.4 Print Initial Values
16 5.2.5 Stop Printing
17 5.3 New/Edit Data
17 5.3.1 New/Edit Data
18 5.3.2 Add TextObject
18 5.3.3 Add Production Date Object
18 5.3.4 Add Expiration DateObject
19 5.3.5 Add Image LogoObject
19 5.3.6 Add Counter Object
19 5.3.7 Add Shift CodeObject
20 5.3.8 Add BarcodeObject
21 5.3.9 Delete Data or Object
22 5.4 System Management
22 5.4.1 System Setting
23 5.4.2 Edit Options
24 5.4.3 Printing Options
26 5.4.4 Special Features
27 5.4.5 Screen TouchCorrection
28 5.5 Tools Management
28 5.5.1 Image Management
28 5.5.2 System Upgrade
29 5.5.3 System Backup
29 5.5.4 System Record
29 5.5.5 AboutEquipment
30 5.5.6 System Reset
31 5.6 Edit Input Method Options
32 5.7 Status Bar
33 Chapter Six: Care and Maintenance
33 6.1 Printer Care and Maintenance
33 6.2 Ink Cartridge Care and Maintenance
34 Chapter Seven:Troubleshooting
34 7.1 Troubleshooting for InkCartridge
35 7.2 Troubleshooting for Printer
36 Appendix 1: Terms and Definitions
Please read this manual carefully before you use thisequipment.
Introduction
Thank you for your purchase of this high resolution printer. We want you to get helpful information
for your work with this equipment; therefore we would like to explain a little bit about how to use this
machine by this user manual by the following content:
Important precautions for use of themachine
Introduction of printer: Parts and components of themachine
Setup and Installation Instructions: Instructions for Equipment Setup and Cartridge Installation.
How to use the printer and the check work before/after use of the printer: explanations of general
operation and startup/shutdown.
Operation instructions: explanations on how to new/edit data for printing, and how to adjust
printer settings.
Care and Maintenance: Care and maintenance for printer andcartridge
Troubleshooting: Common failures occurred andsolutions
Appendix 1 - Terms and Definitions: Definitions for terms used in thisdocument.
Please read this user manual carefully before first use of the printer for full understanding and atten-
tion of important information so that you will get maximum use from your new equipment. This will
also help you have a quick reference to related sections when you have any problems during use.
Note 1: If you cannot solve the problem encountered during use, please contact us for assistance.
Note 2:The information contained herein is subject tochange without notice.The amended informa-
tion will be updated in user manual by newedition.
Note 3: Any machine failure or damage caused by user’s negligence in following this manual will not
be covered by the warranty.
ChapterOne:ImportantPrecautionsforUsing
Welcome to use this printer. In order to protect your personal safety and user rights, ensure correct
installation and operation, and full play of the machine, it is important that you read the precautions
carefully.
1.1 Important Setup Precautions
1.1.1 Use exclusive power supply for the equipment. Do not share same power supply with other
equipment. Besides, Installation of an additional UPS isrecommended.
1.1.2 Mount the support in sound and stable place. Do not choose the location that will be easily
affected by shock or sway.
1.1.3 Choose well-working conveyor belt for high printquality.
1.1.4 Add deflector to the printer for production line setup in order to prevent any printing object
hitting the nozzle plate to causedamage.
1.1.5 Make sure the printer is wellgrounded.
1.1.6 Maintain the distance between deflector and printing object at 0.5-2.5mm as recommended.
1.1.7 Make sure to insert and remove the ink cartridge by an angle of 15 degree so as not tocause
damage to the cartridge.
1.1.8 Make sure the setup environment is tidy and clean. Clean the dust on printer from time to time
when dusty environment isunavoidable.
1.2 Important Operation Precautions
1.2.1 Do not poke or impact the touch screen sharply.
1.2.2 Do not cover up the built-in photocell. Otherwise the printer doesn’tprint.
1.2.3 Use Non-woven to wipe the nozzle plate when the print is not clear or dots are missing.
1.2.4 Set print delay value for best print result when print position changes (see Section5.2.3).
1.2.5 Do not insert or remove ink cartridge while the machine is in printing process so asnot to cause
damage to the cartridge.
1.2.6 Do not use compressed air for cleaning the touch screen. High pressure of the compressed air
will damage the touch screen.
1.2.7 Do not use compressed air for direct or indirect cleaning of the ink cartridge. High pressureof
the compressed air will damage the nozzleplate.
1.2.8 Read Chapter Seven for troubleshooting when there’s failure occurs. If you cannot solve the
problem encountered, contact your local dealer or our after-saleservice.
Note: Depending on properties, some ink cartridge may require to be removed from printer after
use. Turn off the machine and remove the cartridge from printer.Wipe the printhead clean with Non-
woven; cap the printhead with the designed cap for prevention of the nozzles from clogging.
(Contact our after-sale service for information of inkproperties.)
ChapterTwo:InstallationandSetupInstructions
This chapter will illustrate how to set up the equipment and how to install an ink cartridge. Firstly
please check the machine parts by looking at the packing picture and parts list.
Packing Picture
2.1 Parts List
Once you have unpacked your machine, check to make sure that you have all the parts shownhere.
1、Controller 2、Printer head 3、USB
4、power line 5、power supply adapter 6、printer head
connection line
7、ground line 8、round bar fixer X 2 9、round bar
10、bi-directionbracket 11、bi-pass clamp x 2 12、A. M8*16 SCREW: 11PCS
B. M4*8 SCREW: 2PCS
13、inner hexagon spanner 14、Springback holder and
anti shock groups (selectable)
2.2 Device installation
2.2.1 Side printing installation
2.2.2 Down printing installation
2.2.3 Springback mechanism installation (optional)
Springback mechanism installation Anti-shock plate installation
Indice
Altri manuali Sojet Stampante
