Sokkia RC-PR4 Guida utente

SURVEYING INSTRUMENTS

On-demand Remote Control System

SYSTEM MANUAL

RC-PR4

Class 1 Laser Product

:This is the mark of the Japan Surveying

Instruments Manufacturers Association.

Li-ion S Li-ion

SURVEYING INSTRUMENTS

On-demand Remote Control System

RC-PR4

SYSTEM MANUAL

• Thank you for selecting the On-demand Remote Control System RC-PR4.

• Please read this operator's manual carefully before using this product.

• Verify that all equipment is included.

C“10.1 Standard Equipment”

• The specifications and general appearance of the instrument are subject to change without prior

notice and without obligation by Sokkia Topcon Co., Ltd. and may differ from those appearing in

this manual.

• The content of this manual is subject to change without notice.

• Some of the diagrams shown in this manual may be simplified for easier understanding.

Class 1 Laser Product

HOW TO READ THIS MANUAL

Symbols

The following conventions are used in this manual.

G: Indicates precautions and important items which should be read before

operations.

C: Indicates a cross-reference to refer to for additional information.

$: Indicates supplementary explanation.

&: Indicates an explanation for a particular term or operation.

[DIST] etc. : Indicates softkeys on the total station display.

{ESC} etc. : Indicates operation keys on the total station.

IPOWER etc. : Indicates RC-Controller LEDs.

Notes regarding manual style

• Except where stated, "SRX" or "Series SRX" means SRX1X/SRX2X/SRX3X/SRX5X, "NET" means

NET05AX and NET1AX, "total station" means SRX/NET in this manual.

• Screens and illustrations used in this manual are of SRX (with RC-TS3 handle).

• The On-demand Remote Control System adds remote control functions to the total station. Please

read this manual in conjunction with the operator’s manual for your instrument.

• The content of this system manual is mainly concerned with explaining the operation of the RC-

Controller. For precautions and operating method, please read the operator’s manual for your total

station or data collector.

•Bluetooth®is a registered trademark of Bluetooth SIG, Inc.

• All other company and product names featured in this manual are trademarks or registered

trademarks of each respective organization.

iii

CONTENTS

1. PRECAUTIONS FOR SAFE OPERATION ................ 1

2. PRECAUTIONS .......................................................... 3

3. LASER SAFETY INFORMATION ............................... 6

4. ON-DEMAND REMOTE CONTROL FUNCTIONS .... 7

4.1 Turning Operation Flow ..................................................... 8

4.2 Measurement Flow ............................................................ 9

5. SYSTEM CONFIGURATION .................................... 12

5.1 Parts of the RC-Controller ............................................... 12

5.2 System Configuration of the SRX/NET ........................... 14

5.3 System Configuration of the RC-Controller ..................... 15

6. SETTINGS FOR THE SRX/NET .............................. 20

6.1 Settings for Bluetooth Communication ............................ 20

6.2 Settings for Auto Pointing and Auto Tracking ................. 22

6.3 Performing Turning from the SRX/NET ........................... 24

6.4 Turning Error ................................................................... 26

7. BASIC OPERATION ................................................. 27

7.1 Using the Battery ............................................................. 27

7.2 Configuring Bluetooth Connections to the SRX/NET ....... 28

7.3 Button Operations ........................................................... 29

7.4 Communication Status .................................................... 31

7.5 Calibrating the Electronic Compass ................................ 32

8. ERROR INDICATIONS ........................................... 35

9. TROUBLESHOOTING ............................................. 36

10.

STANDARD EQUIPMENT AND OPTIONAL ACCESSORIES

10.1 Standard Equipment ....................................................... 38

10.2 Optional Accessories ...................................................... 38

10.3 Power Supply System ..................................................... 40

CONTENTS

11. SPECIFICATIONS .................................................... 41

12. EXPLANATION ........................................................ 44

12.1 High Accuracy with the 360° Prism .................................. 44

13. REGULATIONS ........................................................ 45

1. PRECAUTIONS FOR SAFE OPERATION

For the safe use of the product and prevention of injury to operators and other persons as well as

prevention of property damage, items which should be observed are indicated by an exclamation point

within a triangle used with WARNING and CAUTION statements in this system manual.

The definitions of the indications are listed below. Be sure you understand them before reading the

main text.

Definition of Indication

General

CWARNING Ignoring this indication and making an operation error could possibly

result in death or serious injury to the operator.

CCAUTION Ignoring this indication and making an operation error could possibly

result in personal injury or property damage.

JThis symbol indicates items for which caution (hazard warnings

inclusive) is urged. Specific details are printed in or near the symbol.

DThis symbol indicates items which are prohibited.

Specific details are printed in or near the symbol.

IThis symbol indicates items which must always be performed.

Specific details are printed in or near the symbol.

CWarning

DDo not use the unit in areas exposed to high amounts of dust or ash, in areas where

there is inadequate ventilation, or near combustible materials. An explosion could occur.

GDo not perform disassembly or rebuilding. Fire, electric shock, burns, or hazardous

radiation exposure could result.

EWhen securing the instrument in the carrying case make sure that all catches, including

the side catches, are closed. Failure to do so could result in the instrument falling out

while being carried, causing injury.

CCaution

EWhen mounting the instrument on the pole, tighten the pole-securing knob securely.

Failure to tighten the knob properly could result in the instrument falling off the pole,

causing injury.

DDo not carry the pole with the tip pointed at other persons. A person could be injured if

struck by the shoe.

EKeep hands and feet away from the tip of the pole when fixing the pole in the ground. A

hand or foot stab wound could result.

1. PRECAUTIONS FOR SAFE OPERATION

Power Supply

Bluetooth wireless technology

DDo not use the carrying case as a footstool. The case is slippery and unstable so a

person could slip and fall off it.

CWarning

DDo not short circuit. Heat or ignition could result.

DDo not place articles such as clothing on the battery charger while charging batteries.

Sparks could be induced, leading to fire.

DDo not use batteries other than those designated. An explosion could occur, or abnormal

heat generated, leading to fire.

EUse only the specified battery charger to recharge batteries. Other chargers may be of

different voltage rating or polarity, causing sparking which could lead to fire or burns.

DDo not use the battery for any other purpose. Fire or burns caused by ignition could

result.

HDo not heat or throw batteries into fire. An explosion could occur, resulting in injury.

ETo prevent shorting of the battery in storage, apply insulating tape or equivalent to the

terminals. Otherwise shorting could occur resulting in fire or burns.

DDo not use batteries or the battery charger if wet. Resultant shorting could lead to fire or

burns.

CCaution

FDo not touch liquid leaking from batteries. Harmful chemicals could cause burns or

blisters.

CWarning

DDo not use within the vicinity of hospitals. Malfunction of medical equipment could

result.

EUse the instrument at a distance of at least 22 cm from anyone with a cardiac

pacemaker. Otherwise, the pacemaker may be adversely affected by the

electromagnetic waves produced and cease to operate as normal.

DDo not use onboard aircraft. The aircraft instrumentation may malfunction as a result.

DDo not use within the vicinity of automatic doors, fire alarms and other devices with

automatic controls as the electromagnetic waves produced may adversely affect

operation resulting in an accident.

2. PRECAUTIONS

Precautions

• Protect instruments from heavy shocks or vibration.

• Never touch the RC-Controller laser projection port or the total station beam detector. The ability of

the system to perform Turning may be adversely affected.

• Turn the power OFF before removing the battery from the RC-Controller.

• Remove the battery when the RC-Controller is not used for long periods.

• Do not allow sand to come into contact with the battery cover catches or the 360° Sliding Prism

ATP1S release button. Otherwise sand particles could jam the motion of the catches/button. In the

event that sand has jammed the catches/button, hold the unit so that the catches/button are facing

downward and operate the catches/button several times until the sand has fallen out.

Maintenance

• Wipe the RC-Controller laser projection port and total station beam detector with the wiping cloth

(total station accessory).

• To clean the RC-Controller, lightly moisten a soft cloth in a mild detergent solution. Wring out excess

water until the cloth is slightly damp, then carefully wipe the surface of the unit. Do not use any

alkaline cleaning solutions, alcohol, or any other organic solvents on the instrument.

• Wipe the slide pole for the ATP1S with tissue paper or a cloth when prism movement along the pole

ceases to be smooth. Do not use lubricants.

• Store the instrument in a dry room where the temperature remains fairly constant.

• Check the RC-Controller for proper adjustment periodically to maintain the instrument accuracy.

Precautions concerning water and dust resistance

The RC-Controller conforms to IP55 specifications for waterproofing and dust resistance when the

battery cover is closed and connector caps are attached correctly.

• Make sure that moisture or dust particles do not come in contact with the terminals.

Operating the instrument with moisture or dust on the terminals may cause damage to the

instrument.

• Make sure that the inside of the carrying case and the instrument are dry before closing the case. If

moisture is trapped inside the case, it may cause the instrument to rust.

Charging the battery

• The battery (BDC46C) was not charged at the factory. Charge the battery fully before using.

2. PRECAUTIONS

Precautions concerning Bluetooth wireless technology

• Use of this technology must be authorized according to telecommunications regulations of the

country where the instrument is being used. Contact your local dealer in advance.

C"13. REGULATIONS"

• Sokkia Topcon Co., Ltd. is not liable for the content of any transmission nor any content related

thereto. When communicating important data, run tests beforehand to ascertain that communication

is operating normally.

• Do not divulge the content of any transmission to any third party.

Radio interference when using Bluetooth technology

Bluetooth communication with the RC-Controller uses the 2.4 GHz frequency band. This is the same

band used by the devices described below.

•Industrial, scientific, and medical (ISM) equipment such as microwaves and pacemakers

• portable premises radio equipment (license required) used in factory production lines etc.

• portable specified low-power radio equipment (license-exempt)

•IEEE802.11b/IEEE802.11g standard wireless LAN devices

The above devices use the same frequency band as Bluetooth communications. As a result, using the

RC-Controller within proximity to the above devices may result in interference causing communication

failure or reduction of transmission speed.

Although a radio station license is not required for this instrument, bear in mind the following points

when using Bluetooth technology for communication.

●Regarding portable premises radio equipment and portable specified low-power radio

equipment:

• Before starting transmission, check that operation will not take place within the vicinity of portable

premises radio equipment or specified low-power radio equipment.

• In the case that the instrument causes radio interference with portable premises radio equipment,

terminate the connection immediately.

• In the case that the instrument causes radio interference with portable specified low-power radio

equipment, move away from said equipment and try again. If the problem persists contact your local

dealer.

●When using the RC-Controller in proximity to IEEE802.11b or IEEE802.11g standard wireless

LAN devices, turn off all devices not being used.

• Interference may result, causing transmission speed to slow or even disrupting the connection

completely. Turn off all devices not being used.

●Do not use the RC-Controller in proximity to microwaves.

• Microwave ovens can cause significant interference resulting in communication failure. Perform

communication at a distance of 3m or more from microwave ovens.

●Refrain from using the RC-Controller in proximity to televisions and radios.

• Televisions and radios use a different frequency band to Bluetooth communications.

However, even if the RC-Controller is used within proximity to the above equipment with no adverse

effects with regard to Bluetooth communication, moving a Bluetooth-compatible device (including

Indice

Altri manuali Sokkia Telecomando

Sokkia

Sokkia RC-PR3 Guida utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione